Главная

Automatic 20T 3Axis Bending Machine (Siemens control system)
Model - LLWYJ-20
Description
Power supply 380V/50HZ
Input power 5.9KW
Working pressure 0.2Mpa
Min. diameter of bending 60mm
Max. width of profile H150 x W150mm
Max. diameter of rolls 200mm
Lower shaft center-diamensions 330mm-530mm
Hydraulic cylinder pressure 20T
Roller-holding shaft diameter 65mm
Rotation speed of shaft 1-8r/min
Y-roller cylinder positioning accuracy ±0.1mm
Max. Y-roller travel 200mm
Torque 6000N.m
Size of machine 1000*800*1600mm
Weight of machine 800kg

Automatic 20T 3Axis Bending Machine (Siemens control system)
Model - LWYJ-20
Description
Power supply 380V/50HZ
Input power 5.9KW
Working pressure 0.2Mpa
Min. diameter of bending 60mm
Max. width of profile H150 x W150mm
Max. diameter of rolls 200mm
Lower shaft center-diamensions 350mm-700mm
Hydraulic cylinder pressure 20T
Roller-holding shaft diameter 65mm
Rotation speed of shaft 1-8r/min
Y-roller cylinder positioning accuracy ±0.1mm
Max. Y-roller travel 200mm
Torque 6000N.m
Size of machine 1300*1100*1500mm
Weight of machine 1000kg

Automatic CNC Roll Bending Machine (Industrial computer system)
Model - LWYJ-CNC-20
Description
Power supply 380V/50HZ
Input power 5.9KW
Working pressure 0.2Mpa
Min. diameter of bending 60mm
Max. width of profile H150 x W150mm
Max. diameter of rolls 200mm
Lower shaft center-dimensions 350mm-700mm
Hydraulic cylinder pressure 20T
Roller-holding shaft diameter 65mm
Rotation speed of shaft 1-15r/min
Y-roller cylinder positioning accuracy ±0.02mm
Max. Y-roller travel 200mm
Torque 6000N.m
Size of machine 1300*1100*1500mm
Weight of machine 1000kg

Automatic 20T 3Axis Bending Machine (Siemens control system)
Equipped by 3 pc of Heating Gun for UPVC processing
Model - LSWYJ-20T
Description
Power supply 380V/50HZ
Input power 5.9KW
Working pressure 0.2Mpa
Min. diameter of bending 60mm
Max. width of profile H150 x W150mm
Max. diameter of rolls 200mm
Lower shaft center-diamensions 350mm-700mm
Hydraulic cylinder pressure 20T
Roller-holding shaft diameter 65mm
Rotation speed of shaft 1-8r/min
Y-roller cylinder positioning accuracy ±0.1mm
Max. Y-roller travel 200mm
Torque 6000N.m
Size of machine 1300*1100*1500mm
Weight of machine 1000kg

LJBZ2540 Automatic Vertical Insulating Glass Assembly Line
Features
• Siemens PLC control system (Germany), touchscreen interface
• Automatic detection of coated and low-e glass
• 3 pairs of soft brushes for online and offline washing of low-e glass
• The washing machine uses stainless steel and is waterproof
• Air heating system
• Automatic fan start and stop
• Noise reduction system
• Online washing speed display
• Intelligent intermittent operation mode, energy saving
• Adjustable pressure plate to maintain a flat pressure surface
• Automatic gas filling: gas concentration can be set and the filling process is displayed online at high gas concentrations
• Connection via aviation plug
• Designed for the production of single-chamber, double-chamber, and structural (stepped) glass double-glazed windows

Vertical Insulating Glass Sealing Robot
Model LJTJ2540
Main Features:
• Japanese Yaskawa servo control system, 8 axes, 7 sets of servo drives, fully automatic and highly efficient sealing machine
• 4 sections, glass storage option
• Toothed belt drive, smooth transmission and precise positioning
• Automatic glass corner sealing with a scraper and roller
• Automatic glass size and adhesive depth measurement
• All automatic functions are manually controlled
• Capable of coating double/triple glazing
• One booster pump set controls two sealant groups (optional)
• Suitable for silicone, polysulfide, and silicone structural sealants
• Can be connected to an insulating glass processing line

LJTB01 Butyl Extruder
Key Features:
Butyl extrusion speed can reach 47 m/min.
• Butyl savings compared to conventional equipment: adhesive consumption reaches 7 g/m.
• Automatic exhaust function ensures continuous butyl application.
• PLC control system, touchscreen.
• Glue-free synchronous belt ensures belt cleanliness.
• Main components are made from materials from renowned German manufacturers, ensuring stable operation.
• Automatic gluing head width adjustment ensures uniform butyl application on both sides thanks to a built-in quick-release control valve.
• Use of a movable vertical butyl feed mechanism and horizontal extrusion is convenient and practical.
• On/off time can be adjusted to suit needs

LJZW2020 Automatic Frame Bending Machine
Key Features
• Siemens 1200 PLC control system with high operating speed
• 4 storage groups
• Automatic cutting and feeding of aluminum frames
• Automatic pin jam prevention during bending and cutting
• Continuous frame bending
• Aluminum frames available in sizes from 6A to 27A
• Various bending tools for different frame sizes
• Pause and reset device for handling equipment malfunctions
• Curved aluminum frame, smooth stainless steel, heat-resistant spacer
• USB port function for direct reading of Excel files

LJGZ 2020 Molecular Sieve Frame Filling Machine
Main Features
• Siemens PLC control system
• Molecular sieve size ranges from 0.5mm to 0.9mm
• Simple and intuitive touchscreen interface
• Machine height can be adjusted to suit frame size
• Automatic loading and refilling of molecular sieve
• Dual discharge tubes increase filling speed
• Adjustable filling time
• Automatic drilling, filling, and sealing
• Main components are imported brands
• Filling with large molecular sieve particles

LJSKJ02
Automatic conveyor for moving filled assembled aluminum frames to the glass unit assembly area on the line.
Standard machine.

Automatic Glass Cutting Line EGCNC6133.
Jumbo glass format, double-sided loading station, glass cutting table with low-e coating removal option, pneumatic breaking table.
Technical Parameters:
1) Top Size Range: Minimum top size: 2400x1500 mm (single surface);
2) Maximum film top size: 6100x3300 mm;
3) X-Axis Travel Speed: 5~25 m/min (adjustable);
4) Y-Axis Travel Speed: 8~12 m/min (adjustable);
5) Feed Speed: 5-25 m/min (adjustable);
6) Number of Pivot Arms: 12 arms (double pivot);
7) Number of Suction Cups per Arm: Four;
8) Power source: AC 380 V / 50 Hz
9) Total unit power: 8-18.5 kW;
10) Compressed air: 0.6~0.8 MPa

LSXZ1B-125 Single-spindle Copy Router Machine PATTERN COPY ROUTING MACHINE is used to process the lock hole, water slot and hardware hole of PVC and aluminum windows and doors. Standard molding board to control the hole size, the copying speed is 1: 1; Equipped with high-speed route copying milling head to ensure the milling accuracy. The double-pitch pattern copying needle design is suitable for different hole sizes. It can process various grooves controlled by the ruler

1. Used to assembly hardware systems such as Tilt, Tilt & Turn, Parallel Slide, Pivot, Slide-fold, Double Sash and Sliding Systems on different types, various sizes of window & door sash profiles without tape measure and pencil using, without need for molds and templates, provides speedy, high quality and standard assembling.2.Equipped with an industrial computer and a barcode scanner, it can be connected to other machines on the production line for data exchange3.Sash Assembly table4.Servo positioning espagnolette punching device, used for punching locking strips of various types of window sashes5.Full Automatic Screwing, Automatic screw feeding unit, Infrared indicator .6.Movable, adjustable triple handle hole drilling group with reinforced profile & upvc profile together.7.Latch Slot milling8.Two Holes Drilling On the sash with Stopper

Aluminium Profile Cutting And Machining Center

Its super-efficient workstation with integrates ERP door and window software + 3-angles efficient sawing + 3-station 4-direction 8-axis drilling and milling + laser scribingModel: SZA610Input Voltage: 380V/50Hz/3P or CustomizedTotal power: 45.55KWSaw blade specifications:∮550*4.4*∮30*120Sawing angle +45º 90°-45°Sectional size of sawed profile (width×height):180*150mmWeight about 12T

Tool Change CNC Aluminium Processing Machine HANS System

Model:GCGZD-CNC series, GCGZD-CNC-2500/3000/3500(X-way stroke)Power:380V 50Hz 3P or customizationCNC processing machine for aluminium profile, full automatic aluminium profile milling and drilling machine

SINON - CHINESE EQUIPMENT FROM A LARGE FACTORY.
EXCLUSIVELY IN RUSSIA. WE GUARANTEE THE BEST QUALITY.
IN STOCK SALE, IN STOCK from an authorized dealer. LEASING AVAILABLE
SINON SZA-400. CNC MILLING MACHINE FOR PROCESSING END CUTTING OF ALUMINUM PROFILES.
Specifications
Used for milling end cutting of aluminum profiles for doors and windows.
Model: SZA400
Power voltage: 380 V, 50 Hz
Total equipment power: 11 kW
Spindle speed: 2850 rpm
Workbench width: 595 mm
Diameter: φ30 mm
Cutter diameter: φ350 mm
Maximum milling depth: 120 mm
Maximum milling height: 200 mm
Dimensions: 2880 x 1880 x 2160 mm
Weight: 1950 kg

SINON - CHINESE EQUIPMENT FROM A LARGE FACTORY.
EXCLUSIVELY IN RUSSIA. WE GUARANTEE THE BEST QUALITY.
IN STOCK SALE, IN STOCK from an authorized dealer. LEASING AVAILABLE
SINON SZA-400V. CNC MILLING MACHINE FOR PROCESSING END CUTTING OF ALUMINUM PROFILES.
Specifications
Used for milling end cutting of aluminum profiles for doors and windows.  Variable Angle of Milling
Model: SZA400V
Power voltage: 380 V, 50 Hz
Total equipment power: 11 kW
Spindle speed: 2850 rpm
Workbench width: 595 mm
Diameter: φ30 mm
Cutter diameter: φ350 mm
Maximum milling depth: 120 mm
Maximum milling height: 200 mm
Dimensions: 2880 x 1880 x 2160 mm
Weight: 1950 kg

Aluminium Profile Cutting And Machining Center

Its super-efficient workstation with integrates ERP door and window software + 3-angles efficient sawing + 3-station 4-direction 8-axis drilling and milling + laser scribingModel: SZA610Input Voltage: 380V/50Hz/3P or CustomizedTotal power: 45.55KWSaw blade specifications:∮550*4.4*∮30*120Sawing angle +45º 90°-45°Sectional size of sawed profile (width×height):180*150mmWeight about 12T

SINON SHQXJ01 Welding & Corner Cleaning Line
/ Welding cleaning production line for pvc door and window / SHQXJ01 /
The production line is specialized in welding and cleaning outer corners of colored PVC profiles. It can be welded and formed into a rectangular window frame at one time, and the upper and lower welds are cleaned. Then, the completed window is transferred to the corner cleaning unit through the transfer workbench to complete the corner cleaning of the window. CNC Corner Cleaning

SINON SHQXJ02 Welding & Corner Cleaning Line UPVC
HORIZONTAL 4-HEAD WELDING MACHINE, DOUBLE CORNER CLEANING STATION

Features:
The production line is specialized in welding and cleaning outer corners of colored PVC profiles. It can be welded and formed into a rectangular window frame at one time, and the upper and lower welds are cleaned. Then, the completed window is transferred to the corner cleaning unit through the transfer workbench to complete the corner cleaning of the window. Double CNC Corner Cleaning Station.