Главная

USED ​​URBAN KV2800HF GLAZING UNIT
Glazing and control stand with lifting, manufacturer URBAN, Germany. In good condition. Only compressed air is needed for the equipment to operate. The glazing stand has been tested, it can be demonstrated in operation. Glazing stand without lifting URBAN KV2800HF. Full clamp of the structure at an angle of 90 degrees. The condition is excellent. Only compressed air is needed for the stand to operate.
Location - Samara, warehouse storage. We ship by forklift, side feed, with uncovering.
Shipment - pickup, delivery by a transport company is possible.
Sale - cashless without VAT, we will provide a package of documents - a supply agreement, UPD, acceptance certificates, TTN for the road.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.

Screw compressor ABAC GENESIS 1110-500. Year of manufacture 2010. Complete with a dryer and a 500-liter receiver. Capacity 1500 l/min. Good condition, full maintenance and service. The meter readings can be seen in the photo carousel.
You can see the status by video call with the warehouse, just agree on the time in advance.
Sale - cashless without VAT, we will provide a set of documents - a supply agreement, UPD, acceptance certificate, TTN for shipment. We will help with loading onto your transport, or we will help find additional cargo to your city in the Russian Federation.

USED ​​YILMAZ DKN-300, 2011 YEAR OLD. SEMIAUTOMATIC MEASURING ROLLER CONVEYOR, TURKEY
Measuring roller conveyor, working length 3.0 meters. Model DKN-300, manufacturer YILMAZ, Turkey. Movement of the measuring stop using a flywheel and belt drive. Reading the size by magnetic tape, transmitting information via an encoder to a universal electronic display. The roller conveyor has been replaced with a new main switch. The roller conveyor is in excellent condition.
Location - Samara, warehouse storage. After checking, the roller conveyor is packed in a wooden box for shipment and further transportation. Sale by bank transfer without VAT is possible.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

NEW OZCELIK VEGA-IIA_AUTOMATIC SINGLE-HEAD PENDULUM SAW
Single-head aluminum saw Ozcelik Vega II A 400 with pendulum feed of the saw blade and coolant supply system, which is designed for cutting aluminum profiles and non-ferrous metals. Automatic feed of the saw blade. Cutting safety is ensured by a double spring system and a protective cover.
The cutting angle can be changed within the range from -45° to the right to +45° to the left. The main angles -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° have a clear fixation, other intermediate angles are set according to a graduated scale. The workpiece is fixed on the vega-2 thanks to two vertical and two horizontal pneumatic clamps.
THE PRICE OF THE MACHINE INCLUDES A 3.0 M MEASURING ROLLER UNIT.

3+1 Axis CNC CONTROLLED COPY ROUTER MACHINE
Brand: China SinonModel: GCGZD-CNC-800Input power source: 380V/50Hz or CustomziedTotal power: 5KwMain spindle power: 3.5kwMain spindle speed: 0-18000rpmX axis processing range: 800mmY axis processing range: 200mmZ axis processing range: 145mmDimension: 1300×1500×1700mmWeight: 800kg

SINON LJRZ2-CNC-600 * 6000
DOUBLE HEAD CNC AUTOMATIC CUTTING MACHINE, ARBITRARY ANGLES ADJUST
1. The double head CNC front saw is an advanced equipment used for cutting aluminum profiles.
2. This machine has a neat and stylish appearance, modeled on the European style.
3. The new closed-loop control system used in this machine is highly efficient, ensuring precise cutting.
4. The machine is equipped with a direct drive saw blade, which uses a lever-turn cutting type, making the blade feed by the pneumatic-hydraulic damping cylinder and ensuring smooth cutting.
5. The imported saw blade used in this machine has high precision, making the cutting surface smooth.
6. The cutting angle of the machine can be adjusted in the range of 45°~157.5° by the servo motor driving the speed reducer.

CEM350 Aluminium Window & Door CNC End Milling Machine
Features:
1. Cnc 5 Axis End Milling Machine CEM350 is suitable for forming processing of all kinds of profile end face and step surface.
2. Five-axis automatically end milling machine, no need change end milling cutters, no need additional end milling cutter cost.
3. High processing accuracy: high power Italian spindle motor with higher processing quality. No Burrs.
4. Two separate sets of 3.5 mm saw blade, one of which can be adjusted at 0 °and 90 °. Completely solving gap headache issue.
5. Same section with different length profile can be milled in one time. High volume production.
6. The feeding system is driven by servo motor, the speed and position are adjustable, , the cutting feed is stable and even, the machining precision is high, the surface quality is good.
7. Fully covered structure. Safer and less noisy for operator.

TEM200 Twin Head End Milling Machine For PVC Window Processing
Feature:
1. End milling machine TEM200 is used for milling the transom and door frames in UPVC and aluminum profile.
2. Two motors are connected with two shafts directly.
3. Milling several pcs profile in one cycle.
4. Milling cutter up and down adjustment as well as left and right adjustment for various section of profile .
5. Big diameter for milling cutter, high cutting speed.
6. Cutter spindle connected by shaft coupling, cutter working precision does not effect motor spindle running precision .

LXDB－250 Aluminium window Automatic End Milling Machine
Features:
1.Used for processing aluminum profile end with massive milling.
2.Universal cutter, no need special milling cutter for different profile. Saving cost and cutter replacing time.
3.Super precision main shaft insured accurate and steady processing
4.Hydraulic Feeding device ensure stable feeding..
5.Convenient tool adjustment meets different processing requirements.

Thermal Break Assembly Machine

Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of knurling machine with strip feeder device
1 set of rolling machine
Daily capacity is 5~6 Tons per 10 hours

Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours

ADSSE2 UPVC Window & Door Auto Screw Driver Machine Feature:
1. Auto screw driver machine ADSSE2 is a stationary Screwdriver Advancing Unit with integrated Screw Feeder to insert screws into wood, plastics or metal, e.g.to fix the reinforcement in PVC profiles.
2. Automatic: Integrated screw feeding system and automatic start of the hopper movement when operating.
3. Flexible Production: Work piece height (screwing level) can vary between 35 and 95 mm above the base plate.
4. Constant screw driving depth for all materials and independent lf the work piece height due to the automatic depth of drive control.
5. Simple Operation: Manual operation by treadle
6. High Efficiency: Screw driving cycle time to insert one self-drillng screw for reinforcement fixing approx.2 seconds.
7. Horizontal clamping device.

OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.

Two-head welding machine ELUMATEC ZS720/LV, in good condition. Fully functional, complete (covers, casings, side supports, lighting, undercoatings, welding mirrors in good condition, with Teflon). Year of manufacture 2007, the machine was adjusted and maintained in our warehouse, we can connect and demonstrate in operation, including via video call or in the personal presence of the client on his profile samples.
We work on a non-cash basis, without VAT. We will help with shipment and sending to the transport company, side loading on your transport. We will provide a full package of documents for the transaction - a supply agreement, UPD, acceptance certificates, consignment notes for shipment.
The machine is not in use, it is in warehouse storage in a warm warehouse. Location - Samara. Upon request, we can send WhatsApp photos and videos of the machine in operation.