List of products by brand FENSTEK, Китай

FENSTEK CEM-350 CNC Milling Machine
CEM350 Aluminium Window & Door CNC End Milling Machine
Features:
1. Cnc 5 Axis End Milling Machine CEM350 is suitable for forming processing of all kinds of profile end face and step surface.
2. Five-axis automatically end milling machine, no need change end milling cutters, no need additional end milling cutter cost.
3. High processing accuracy: high power Italian spindle motor with higher processing quality. No Burrs.
4. Two separate sets of 3.5 mm saw blade, one of which can be adjusted at 0 °and 90 °. Completely solving gap headache issue.
5. Same section with different length profile can be milled in one time. High volume production.
6. The feeding system is driven by servo motor, the speed and position are adjustable, , the cutting feed is stable and even, the machining precision is high, the surface quality is good.
7. Fully covered structure. Safer and less noisy for operator.
$89,500.00
FENSTEK TEM-200 Automatic Milling Machine
TEM200 Twin Head End Milling Machine For PVC Window Processing
Feature:
1. End milling machine TEM200 is used for milling the transom and door frames in UPVC and aluminum profile.
2. Two motors are connected with two shafts directly.
3. Milling several pcs profile in one cycle.
4. Milling cutter up and down adjustment as well as left and right adjustment for various section of profile .
5. Big diameter for milling cutter, high cutting speed.
6. Cutter spindle connected by shaft coupling, cutter working precision does not effect motor spindle running precision .
$7,350.00
FENSTEK LXDB-250 Automatic Milling Machine
LXDB-250 Aluminium window Automatic End Milling Machine
Features:
1.Used for processing aluminum profile end with massive milling.
2.Universal cutter, no need special milling cutter for different profile. Saving cost and cutter replacing time.
3.Super precision main shaft insured accurate and steady processing
4.Hydraulic Feeding device ensure stable feeding..
5.Convenient tool adjustment meets different processing requirements.
$24,200.00
FENSTEK ADDSE-2
ADSSE2 UPVC Window & Door Auto Screw Driver Machine Feature:
1. Auto screw driver machine ADSSE2 is a stationary Screwdriver Advancing Unit with integrated Screw Feeder to insert screws into wood, plastics or metal, e.g.to fix the reinforcement in PVC profiles.
2. Automatic: Integrated screw feeding system and automatic start of the hopper movement when operating.
3. Flexible Production: Work piece height (screwing level) can vary between 35 and 95 mm above the base plate.
4. Constant screw driving depth for all materials and independent lf the work piece height due to the automatic depth of drive control.
5. Simple Operation: Manual operation by treadle
6. High Efficiency: Screw driving cycle time to insert one self-drillng screw for reinforcement fixing approx.2 seconds.
7. Horizontal clamping device.
$11,250.00
FENSTEK ADS500*4300 Double Head Cutting Machine (automatic)
ADS500x4300 Aluminum Window CNC Double Head Cutting Saw
Features:
1.The main material for aluminum alloy curtain wall, window material cutting and can also be used for plastic profile cutting.
2.The use of carbide saw blades, diameter up to 500 dia, line of high speed high precision machining.
3.Right heads feeding adopts pitch ball screw-lead motion, with high accurate driving, locating and smooth working.
4.This machine uses the numerical control technology, profiles of different specifications can completed automatically under the expected size.
5.Machine during operation, two saw blade can separate cutting.
6.The blade from the bottom to the top, sawing profile is more safe and reliable, and the cutting height and cutting width are large.
$31,200.00
FENSTEK TADS600*6000 Double Head 3-Axis Saw (Arbitrary Angles, Tilting&Pivoting Option)
TADS600X6000
Aluminum Window CNC Double Head Cutting Saw
Features:
1. The machine adopts high carbon steel welding and tempering, and the main structural parts use ductile cast iron integrated molding to ensure the accuracy and durability of the machine.
2. This machine is mainly used in doors and Windows curtain wall or industrial profile composite any corner cutting.
3. Workbench rotation angle of 22.5° ~140, Saw blade fillet range -45°~90°
4. The damping method is adopted to ensure that the incoming knife is stable and fast retreat, and the knife is avoided from shaking during the use process.
5. The maximum outer diameter of diamond saw blade up to 600mm, high line speed, high machining precision
6. The high precision servo electric cylinder drive for rotation and length positioning is servo and closed loop.
$100,500.00
FENSTEK LJB2B CNC 600*6000 Double Head CNC Arbitr
FENSTEK LJB2B-CNC-600*6000 CNC B2B TWO-HEAD FRONT SAW WITH SERVO DRIVE
SUPPLY ON ORDER!!!
TWO-HEAD FRONT SAW FOR ALUMINUM WITH CNC.
Industrial computer, label printer installed. 600 mm disks, cooling. Maximum cutting length 6000 mm.
Functions:
1. Double-head three-axis front saw with CNC for cutting at any angle.
2. The machine is similar to European models.
3. The machine has a modern control system.
4. The saw blade with direct drive has a lever type of cutting.
5. The saw blades are fed using a hydraulic damping cylinder, ensuring smooth cutting.
6. The imported control system ensures cutting quality.
7. The cutting task can be uploaded to the machine via the network. The cutting length can also be input directly.
8. The servo motor drives the speed reducer, adjusting the cutting angle: 22.5 ° - 135 °.
$84,350.00
ПВХ FENSTEK IADS500*4500 Double Head CNC Cutting Machine
PVC FENSTEK IADS500*4500 TWO-HEAD CNC SAW FOR CUTTING 4-6 PVC PROFILES IN ONE CYCLE
SUPPLY ON ORDER!!!
IADS500X4500 Automatic Double-Head Saw for Cutting PVC Profiles with Bottom Feed. CNC Saw for Cutting 4-6 Profiles at a Time. It is possible to retrofit the saw with an industrial computer and label printer option.
Characteristics:
1. The machine is specially designed for cutting PVC window profiles in large volumes.
2. Four or six parts can be cut at a time, depending on the profile width.
3. Automatic change inside 45 and 90 degrees. Different degrees are not available.
4. The saw blade is fed stably and accurately from the inside to the outside using a pneumatic cylinder. An additional hydropneumatic feed cylinder is available.
$52,500.00
FENSTEK M5 Aluminium CNC 5-Axis Machining Center
FENSTEK M5
Aluminium Facade Five-axis Machining Center
Features:
1. Aluminium Door And Window Making Machine FENSTEK M5 is 5 Axis profile machining center.
2. Five Axis Machining Center M5 can be used for processing aluminium, steel and upvc profiles.
3. Online with ERP software, can realize scanning code and automatic processing.
4. When the profile is clamped at one time, it can complete all the sawing, milling, drilling, tapping, thread drilling and notching at angle in all surfaces except bottom side. Avoid profile surface scratches and damages.
5. Adopts moving beam and moving column gantry frame structure, the movement is more stable, improves the machining rigidity of machine.
6. Adopts imported high-end CNC control system, Germany's Siemens or Italian OSAI.
$332,000.00
FENSTEK M4 Four Axis Machining Center Aluminium
FENSTEK M4
Aluminium Facade Four-axis Machining Center
Features:
1. Aluminum Facade Machining Center FENSTEK M4 is advanced industrial CNC 4-axis profile machining systems.
2. Suitable for aluminum profile and other light alloys, as well as UPVC profile processing.
3. The milling head can drill within a range of 90 ° ~0 ° ~-90 ° with according tools at any position.
4. The machine completes milling, drilling, flexible tapping, grooving, steel drilling(within 3 mm) and other multi-functional precisely in one time, the profile was conveyed by the precise stationary avoid profile damage.
5. Adopts imported high precision linear guide ways, ball screws, gear racks and servo motor, ensuring smooth motion, positioning and processing in high precision.
6. High-quality imported automatic tool change based on automatic travel magazine, minimum the tool change time and rotation noise, maximum stability, precision, and cutting ability.
$156,000.00
FENSTEK QUATTRO A Welding & Corner Cleaning Line UPVC


QUATTRO-A
UPVC Window Automatic Welding/Cleaning Production Line(Single Layer)
Whole Machine1. Used for automatically realizing the welding and cleaning of frame or sash, composed of welding unit, transfer unit and corner cleaning unit, etc.2. 0.2mm & 2mm welding auto change through switcher.3. Imported computer control system, with high reliability.4. Production ability between main units matched each other.5. Automatically program and select processing programs.6. Apply to high grade and mass windows production.

$145,000.00
FENSTEK QUATTRO Welding & Corner Cleaning Line (double layer)
QUATTRO
UPVC Window Automatic Welding/Cleaning Production Line (double layer)
Features:
1. UPVC Window Automatic Welding/Cleaning Production Line (double layer) used for automatically realizing the welding and cleaning of frame or sash, composed of welding unit, transfer unit, manipulator and corner cleaning unit, etc.
2. Welding double layers for 2 unit one time.
3. The cleaning has 4 heads, automatic transfer the window and cleaning 2 corner one time.
4. Imported computer control system, with high reliability.
5 Production ability between main units matched each other.
6 Automatically program and select processing programs.
7. Apply to high grade and mass window production.
8. Seamless and non-seamless function both.
9. Automatic welding and delivery to cleaning, auto cleaning and auto feed out.
$345,000.00
FENSTEK AVW3000D Vertical 4-Point Welding Machine
AVW3000D CNC Vertical Double Layer 4 Point Welding Machine
Features:
1.Double layers for 2 unit one time.High efficiency.
2.Auto positioning and feeding by servo motor. More precise.
3.Solid machinery base and structure ensure long life service with high dimension accuracy.
4.Size tolerance compensation is available to increase welding precision
5.Vertical type occupies less space and is ergonomically good for profile loading.
6.Profile fixture ordered separately can meet various profiles' processing requirement
7.Special “Know — How” technique keep the high corner strength
8.Advanced “Parallel welding “technique is available for the AVW3000P to achieve better
Welding result.
$115,600.00
FENSTEK AVW3000 Vertical 4-Point Welding Machine
AVW3000 UPVC Window CNC Vertical 4 Point Welding Machine
Features:
1. Four Point Welding Machine is One working cycle, one frame fully automatically UPVC Window Welding Machine.
2. Auto positioning by worldwide famous brand AC servo motor.
3. Solid machinery base and structure ensure long life service with high dimension accuracy.
4. Size tolerance compensation is available to increase welding precision.
5. Vertical type occupies less space and is ergonomically good for profile loading.
6. Profile fixture ordered separately can meet various profiles' processing requirement.
7. Special “Know — How” technique keep the high corner strength.
8. Advanced “Parallel welding “technique is available for the AVW3000P to achieve better Welding result.
9. Optional horizontal model (AHW3000P) is possible to integrate into a welding and cleaning production line with CNC corner cleaning machine at later time.
$77,500.00
FENSTEK QUATTRO-W Horizontal 4-Head welding machine
QUATTRO-W CNC Double Layer Horizontal 4 Point Welding Machine
Features:
1. Top grade PVC window welding machine. Suitable for high quality PVC window manufacturer
2. double layers for 2 unit one time.High efficiency.
3. Seamless and non-seamless function both.
4. Square bearing system guarantee clamping, heating plate, locating plate moving precision
5. The advanced IPC controlling system guarantee user-friendly operation, high precision, long life service , and easy link to other machines or production units.
6. Horizontal type is an ergonomically favorably position for the operator inserting upper profile.
7. Size error compensation is available and high accuracy.
8. Special locating system and impaction device ensured its size precision. Strengthen the corner welding and achieve good corner cleaning effect.
$199,000.00
FENSTEK TAWSM3 Automatic Industrial Water Slot Milling Machine
TAWSM3 UPVC Window Double Head Water Slot Milling Machine
Feature:
1. UPVC water slot milling machine mainly used for milling all kinds of water slots and air pressure balance grooves.
2. Two groups of three-axis milling heads along guide, with high precise processing and high production efficiency.
3. The length of milling water slot within 60mm is adjustable and use widely.
4. Absolute milling feeding without professional maintenance and high quality.
5. Apply to high grade and mass windows production.
$19,700.00
FENSTEK MHD-4-5000 Industrial Multi-Drilling Machine
MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.
$22,000.00
FENSTEK AWSM3 Water Slot Milling Machine


AWSM3
Auto Water Slot Milling Machine (Three Routers)




Feature:1. Water Slot Milling Machine has three independent routing units for automatic routing and drilling of water slots and ventilation hole in PVC profile.2. Adopt advancing Germany technique.3. Sliding and turret clamp buffers allow quick adjustment.4. Auto moving working table ensure nice milling5. Easy adjustment to realize symmetrical milling.6. Optional Mode: TAWSM3 with twin machine head suitable for mass production.

$9,400.00
FENSTEK NLHM-100 UPVC Copy Router with Tripple Drilling
FENSTEK NLHM-100 Triple Drilling PVC Copy Router
Features:
1. The keyhole drilling system located opposite the operator is easy to operate.
2. Hydropneumatic drive device for feeding the drilling system cylinder to reduce labor intensity.
3. Automatic milling of handle hole, Euro groove and various holes or grooves for processing UPVC window profile.
4. Mechanical turret head with memory for fast positioning.
5. Routing by stops or universal template in a ratio of 1:1.
7. Adjustment wheel for convenient adjustment of the milling height. User-friendly design.
8. Equipped with a standard template for holes. Standard template for special design.
9. Centering stop, manual.
$6,700.00
FENSTEK CMC-4-2500 CNC Copy Router Machine 3+1 Axis. Windows
FENSTEK CMC-4-2500 CNC COPY MILLING MACHINE 2500 MM, SERVO DRIVE
CMC4-2500 CNC Copy Milling Machine for Aluminum Windows and Doors
1. CMC3-2500 aluminum window making machine is an advanced industrial CNC profile processing system - 3+1 axis. The rotary table is equipped with servo motor.
2. Suitable for processing aluminum, PVC and other light metals;
3. The machine can complete milling, drilling, tapping, chamfering, grooving and other multi-functional operations precisely at one time.
4. The working table can be set at any angle from +90° to -90°. The rotary table is driven by servo motor.
$42,800.00