Главная

USED ​​YILMAZ SD-201, 2017. AUTOMATIC SCREWDRIVER, TURKEY
Automatic single-head screwdriver, model YILMAZ SD-201, manufactured by YILMAZ, Turkey. Year of manufacture 2017. Good condition, complete with frame, plus two branded side roller tables. Location - SAMARA. Shipment - pickup, delivery by transport company is possible.

USED ​​YILMAZ CA-601, 2021 YEAR OF PRODUCTION. MACHINE FOR CLEANING CORNERS FOR ONE CUTTER, TURKEY
Machine for automatic cleaning of corners, for 1 group of cutters. Manufacturer YILMAZ, Turkey, model CA-601. Year of manufacture - 2021.
Excellent condition. Location - Samara. Shipment - pickup, delivery by a transport company in the Russian Federation is possible.

NEW PLASTMAK SC401, 2020 YEAR OF PRODUCTION. SINGLE-HEAD SAW WITH BOTTOM FEED, TURKEY
NEW Single-head saw with bottom feed, for cutting PVC profiles. Disc 420 mm, vertical pneumatic clamps. Roller conveyor included. Manufacturer PLASTMAK, Turkey. Model SC401. Year of manufacture - 2020, good condition. Warehouse storage, it is possible to connect and check the functionality.
Location - Samara. Shipment - pick-up, delivery by a transport company in the Russian Federation is possible.

USED ​​YILMAZ SD-201, 2018. AUTOMATIC SCREWDRIVER, TURKEY
Automatic single-head screwdriver, model YILMAZ SD-201, manufactured by YILMAZ, Turkey. Year of manufacture 2018. Good condition, complete with frame, plus two branded side roller tables. Location - SAMARA. Shipment - pickup, delivery by transport company is possible.

USED ​​YILMAZ SD-201, 2014. AUTOMATIC SCREWDRIVER, TURKEY
Automatic single-head screwdriver, model YILMAZ SD-201, manufactured by YILMAZ, Turkey. Year of manufacture 2014. Good condition, complete with frame, plus two branded side roller tables. Location - SAMARA. Shipment - pickup, delivery by transport company is possible.

NEW PLASTMAK SC301 2020 AUTOMATIC GLAZING BEAD CUTTER
NEW automatic PLASTMAK SC301 glazing bead cutter. Made in Turkey. Year of manufacture 2020. The equipment is new, never used, stored in the original packaging from the moment of purchase. Upon arrival at the warehouse, the machine is unpacked, connected, checked for operability. The glazing bead cutter is equipped with a new "native" measuring roller table. Warehouse storage, the equipment is ready for sale. You can connect and check, upon request we will send WhatsApp photos and videos of the work. Sale by bank transfer, without VAT. We will provide a package of documents - instructions, supply agreement, UPD, acceptance certificate, TTN for transportation. Sending to TC is possible upon agreement.

USED ​​YILMAZ CK 411, 2012. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model CK411, manufacturer Yilmaz, Turkey. Year of manufacture 2012, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.

NEW PLASTMAK SC-201_2020 G.V. AUTOMATIC END MILLING MACHINE
NEW MACHINE. Face milling machine for milling imposts, automatic, for processing PVC profiles. Without cooling. Model PLASTMAK SC201. The machine is absolutely new, never used. Warehouse storage in a warm warehouse.
Year of manufacture 2020.
Upon arrival at the warehouse, the machine is connected and checked. Upon request, we can send photos and videos of the work, it is also possible to show the machine via video link or you can come and see in person, we will connect, show the machine in operation.
Sale by bank transfer without VAT, under the contract. We will provide a package of documents - a supply agreement, UPD, an acceptance certificate, a waybill for transportation.

USED ​​YILMAZ DKN-300, 2011 YEAR OLD. SEMIAUTOMATIC MEASURING ROLLER CONVEYOR, TURKEY
Measuring roller conveyor, working length 3.0 meters. Model DKN-300, manufacturer YILMAZ, Turkey. Movement of the measuring stop using a flywheel and belt drive. Reading the size by magnetic tape, transmitting information via an encoder to a universal electronic display. The roller conveyor has been replaced with a new main switch. The roller conveyor is in excellent condition.
Location - Samara, warehouse storage. After checking, the roller conveyor is packed in a wooden box for shipment and further transportation. Sale by bank transfer without VAT is possible.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

3+1 Axis CNC CONTROLLED COPY ROUTER MACHINE
Brand: China SinonModel: GCGZD-CNC-800Input power source: 380V/50Hz or CustomziedTotal power: 5KwMain spindle power: 3.5kwMain spindle speed: 0-18000rpmX axis processing range: 800mmY axis processing range: 200mmZ axis processing range: 145mmDimension: 1300×1500×1700mmWeight: 800kg

SINON LJRZ2-CNC-600 * 6000
DOUBLE HEAD CNC AUTOMATIC CUTTING MACHINE, ARBITRARY ANGLES ADJUST
1. The double head CNC front saw is an advanced equipment used for cutting aluminum profiles.
2. This machine has a neat and stylish appearance, modeled on the European style.
3. The new closed-loop control system used in this machine is highly efficient, ensuring precise cutting.
4. The machine is equipped with a direct drive saw blade, which uses a lever-turn cutting type, making the blade feed by the pneumatic-hydraulic damping cylinder and ensuring smooth cutting.
5. The imported saw blade used in this machine has high precision, making the cutting surface smooth.
6. The cutting angle of the machine can be adjusted in the range of 45°~157.5° by the servo motor driving the speed reducer.

Thermal Break Assembly Machine

Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of knurling machine with strip feeder device
1 set of rolling machine
Daily capacity is 5~6 Tons per 10 hours

Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours

Double-head welding machine YILMAZ DK502, new model. In excellent condition, year of manufacture 2022. Does not require attachments, all basic checks, settings, maintenance have been completed. Teflon film on welding mirrors has been replaced.
The machine is not in serial operation, it is in warehouse storage. Upon request, we can send additional photos and videos, as well as arrange a video call session, live.
We will help with shipment, we will find options for additional loading or send to the transport company. There is a forklift at the base.
The machine is sold with VAT, we will provide a package of documents - a supply agreement, UPD, invoice, operating instructions, TTN for transportation.

SINON SJ02-350 SINGLE-HEAD PENDULUM SAW
Automatic single-head pendulum saw for cutting PVC profiles (350mm) Saw blade Φ350mm×φ30mm. Cutting width: Max 200mm Cutting height: Max 100mm. Cutting angle: 45/90/135

USED ​​YILMAZ CK 410, 2008. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model CK410, manufacturer Yilmaz, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.

Double-head automatic front saw FIMTEC SD25/S4. Designed for cutting two PVC or aluminum profiles at the same time. Saw blades 500 mm, in good condition. The cut length of workpieces at 90 and 45 degrees corresponds to the standard, no errors or backlashes are observed. Cutting at an angle is also within the standard, the angles after cutting match the specified parameters.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.

1. Used to assembly hardware systems such as Tilt, Tilt & Turn, Parallel Slide, Pivot, Slide-fold, Double Sash and Sliding Systems on different types, various sizes of window & door sash profiles without tape measure and pencil using, without need for molds and templates, provides speedy, high quality and standard assembling.2.Equipped with an industrial computer and a barcode scanner, it can be connected to other machines on the production line for data exchange3.Sash Assembly table4.Servo positioning espagnolette punching device, used for punching locking strips of various types of window sashes5.Full Automatic Screwing, Automatic screw feeding unit, Infrared indicator .6.Movable, adjustable triple handle hole drilling group with reinforced profile & upvc profile together.7.Latch Slot milling8.Two Holes Drilling On the sash with Stopper