Главная

USED ​​YILMAZ SD-201, 2017. AUTOMATIC SCREWDRIVER, TURKEY
Automatic single-head screwdriver, model YILMAZ SD-201, manufactured by YILMAZ, Turkey. Year of manufacture 2017. Good condition, complete with frame, plus two branded side roller tables. Location - SAMARA. Shipment - pickup, delivery by transport company is possible.

USED ​​YILMAZ CA-601, 2021 YEAR OF PRODUCTION. MACHINE FOR CLEANING CORNERS FOR ONE CUTTER, TURKEY
Machine for automatic cleaning of corners, for 1 group of cutters. Manufacturer YILMAZ, Turkey, model CA-601. Year of manufacture - 2021.
Excellent condition. Location - Samara. Shipment - pickup, delivery by a transport company in the Russian Federation is possible.

USED ​​YILMAZ SD-201, 2018. AUTOMATIC SCREWDRIVER, TURKEY
Automatic single-head screwdriver, model YILMAZ SD-201, manufactured by YILMAZ, Turkey. Year of manufacture 2018. Good condition, complete with frame, plus two branded side roller tables. Location - SAMARA. Shipment - pickup, delivery by transport company is possible.

USED ​​YILMAZ SD-201, 2014. AUTOMATIC SCREWDRIVER, TURKEY
Automatic single-head screwdriver, model YILMAZ SD-201, manufactured by YILMAZ, Turkey. Year of manufacture 2014. Good condition, complete with frame, plus two branded side roller tables. Location - SAMARA. Shipment - pickup, delivery by transport company is possible.

USED ​​YILMAZ CK 411, 2012. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model CK411, manufacturer Yilmaz, Turkey. Year of manufacture 2012, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.

USED ​​MURAT KB513, 2010 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine MURAT KB513, year of manufacture 2010. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

USED ​​URBAN KV2800HF GLAZING UNIT
Glazing and control stand with lifting, manufacturer URBAN, Germany. In good condition. Only compressed air is needed for the equipment to operate. The glazing stand has been tested, it can be demonstrated in operation. Glazing stand without lifting URBAN KV2800HF. Full clamp of the structure at an angle of 90 degrees. The condition is excellent. Only compressed air is needed for the stand to operate.
Location - Samara, warehouse storage. We ship by forklift, side feed, with uncovering.
Shipment - pickup, delivery by a transport company is possible.
Sale - cashless without VAT, we will provide a package of documents - a supply agreement, UPD, acceptance certificates, TTN for the road.

USED ​​YILMAZ DKN-300, 2011 YEAR OLD. SEMIAUTOMATIC MEASURING ROLLER CONVEYOR, TURKEY
Measuring roller conveyor, working length 3.0 meters. Model DKN-300, manufacturer YILMAZ, Turkey. Movement of the measuring stop using a flywheel and belt drive. Reading the size by magnetic tape, transmitting information via an encoder to a universal electronic display. The roller conveyor has been replaced with a new main switch. The roller conveyor is in excellent condition.
Location - Samara, warehouse storage. After checking, the roller conveyor is packed in a wooden box for shipment and further transportation. Sale by bank transfer without VAT is possible.

3+1 Axis CNC CONTROLLED COPY ROUTER MACHINE
Brand: China SinonModel: GCGZD-CNC-800Input power source: 380V/50Hz or CustomziedTotal power: 5KwMain spindle power: 3.5kwMain spindle speed: 0-18000rpmX axis processing range: 800mmY axis processing range: 200mmZ axis processing range: 145mmDimension: 1300×1500×1700mmWeight: 800kg

SINON LJRZ2-CNC-600 * 6000
DOUBLE HEAD CNC AUTOMATIC CUTTING MACHINE, ARBITRARY ANGLES ADJUST
1. The double head CNC front saw is an advanced equipment used for cutting aluminum profiles.
2. This machine has a neat and stylish appearance, modeled on the European style.
3. The new closed-loop control system used in this machine is highly efficient, ensuring precise cutting.
4. The machine is equipped with a direct drive saw blade, which uses a lever-turn cutting type, making the blade feed by the pneumatic-hydraulic damping cylinder and ensuring smooth cutting.
5. The imported saw blade used in this machine has high precision, making the cutting surface smooth.
6. The cutting angle of the machine can be adjusted in the range of 45°~157.5° by the servo motor driving the speed reducer.

Thermal Break Assembly Machine

Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of knurling machine with strip feeder device
1 set of rolling machine
Daily capacity is 5~6 Tons per 10 hours

Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours

Two-head welding machine ELUMATEC ZS720/LV, in good condition. Fully functional, complete (covers, casings, side supports, lighting, undercoatings, welding mirrors in good condition, with Teflon). Year of manufacture 2007, the machine was adjusted and maintained in our warehouse, we can connect and demonstrate in operation, including via video call or in the personal presence of the client on his profile samples.
We work on a non-cash basis, without VAT. We will help with shipment and sending to the transport company, side loading on your transport. We will provide a full package of documents for the transaction - a supply agreement, UPD, acceptance certificates, consignment notes for shipment.
The machine is not in use, it is in warehouse storage in a warm warehouse. Location - Samara. Upon request, we can send WhatsApp photos and videos of the machine in operation.

Double-head welding machine YILMAZ DK502, new model. In excellent condition, year of manufacture 2022. Does not require attachments, all basic checks, settings, maintenance have been completed. Teflon film on welding mirrors has been replaced.
The machine is not in serial operation, it is in warehouse storage. Upon request, we can send additional photos and videos, as well as arrange a video call session, live.
We will help with shipment, we will find options for additional loading or send to the transport company. There is a forklift at the base.
The machine is sold with VAT, we will provide a package of documents - a supply agreement, UPD, invoice, operating instructions, TTN for transportation.

SINON SJ02-350 SINGLE-HEAD PENDULUM SAW
Automatic single-head pendulum saw for cutting PVC profiles (350mm) Saw blade Φ350mm×φ30mm. Cutting width: Max 200mm Cutting height: Max 100mm. Cutting angle: 45/90/135

USED ​​YILMAZ CK 410, 2008. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model CK410, manufacturer Yilmaz, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.

1. Used to assembly hardware systems such as Tilt, Tilt & Turn, Parallel Slide, Pivot, Slide-fold, Double Sash and Sliding Systems on different types, various sizes of window & door sash profiles without tape measure and pencil using, without need for molds and templates, provides speedy, high quality and standard assembling.2.Equipped with an industrial computer and a barcode scanner, it can be connected to other machines on the production line for data exchange3.Sash Assembly table4.Servo positioning espagnolette punching device, used for punching locking strips of various types of window sashes5.Full Automatic Screwing, Automatic screw feeding unit, Infrared indicator .6.Movable, adjustable triple handle hole drilling group with reinforced profile & upvc profile together.7.Latch Slot milling8.Two Holes Drilling On the sash with Stopper

Aluminium Profile Cutting And Machining Center

Its super-efficient workstation with integrates ERP door and window software + 3-angles efficient sawing + 3-station 4-direction 8-axis drilling and milling + laser scribingModel: SZA610Input Voltage: 380V/50Hz/3P or CustomizedTotal power: 45.55KWSaw blade specifications:∮550*4.4*∮30*120Sawing angle +45º 90°-45°Sectional size of sawed profile (width×height):180*150mmWeight about 12T

Tool Change CNC Aluminium Processing Machine HANS System

Model:GCGZD-CNC series, GCGZD-CNC-2500/3000/3500(X-way stroke)Power:380V 50Hz 3P or customizationCNC processing machine for aluminium profile, full automatic aluminium profile milling and drilling machine