USED ​​MACHINES FOR PVC & ALUMINUM (FROM STOCK)

USED ​​PERTICI UNIVER-500, 2004 YEAR OF PRODUCTION. DOUBLE-HEAD FRONT SAW, ITALY
Two-head SEMI-automatic front saw PERTICI UNIVER-500, 500 mm discs, 4.0 meter cut, manual positioning of the movable head, pneumatic setting of the required angles of 90-45 degrees, a cooling system is installed. The machine has been completely restored, bearings have been replaced, direct drive, without belts. Two saw blades are installed on the machine, one is in good condition after sharpening, the second disc is new. Year of manufacture 2004. The machine is in excellent working condition, checked, adjusted. Warehouse storage, can be shown in operation. Location - Samara. Shipment - pickup, we can send by a transport company.

Double-head automatic front saw FIMTEC SD25/S4. Designed for cutting two PVC or aluminum profiles at the same time. Saw blades 500 mm, in good condition. The cut length of workpieces at 90 and 45 degrees corresponds to the standard, no errors or backlashes are observed. Cutting at an angle is also within the standard, the angles after cutting match the specified parameters.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.

Double-headed semi-automatic front saw with 550 mm discs, model YILMAZ DC550M. Year of manufacture 2014. In excellent condition, current repairs have been carried out with replacement of bearings and belts, replacement of the power supply in ELGO, calibration and adjustment of cutting angles. The movement of the movable head is manual, with the cutting length being set according to the electronic angle indicator ELGO, Germany. Head tilt outward up to 22.5 degrees, tilt inward up to 45 degrees. Standard angles are set pneumatically.
The equipment is in warehouse storage, it is not used in series. The machine is ready for shipment. A forklift is working at the base.
Upon request, we will provide photos and videos of the equipment in operation, and you can also contact us via video call to demonstrate everything live.

USED ​​YILMAZ CA-605, 2012 YEAR OLD. MACHINE FOR CLEANING CORNERS WITH FOUR CUTTERS, TURKEY
Machine for automatic cleaning of corners, with 6 groups of cutters. Cutters and support table included. Manufacturer YILMAZ, Turkey, model CA-605. Year of manufacture - 2012. Condition is excellent, the machine is fully functional.
Location - Samara. Shipment - pickup, delivery by a transport company across the Russian Federation is possible.

USED ​​YILMAZ CA-601, 2021 YEAR OF PRODUCTION. MACHINE FOR CLEANING CORNERS FOR ONE CUTTER, TURKEY
Machine for automatic cleaning of corners, for 1 group of cutters. Manufacturer YILMAZ, Turkey, model CA-601. Year of manufacture - 2021.
Excellent condition. Location - Samara. Shipment - pickup, delivery by a transport company in the Russian Federation is possible.

NEW YILMAZ CA-603, 2013. MACHINE FOR CLEANING CORNERS WITH FOUR CUTTERS, TURKEY
NEW Machine for automatic cleaning of corners, with 4 groups of cutters. WITHOUT a supporting brush folding table, only "legs" are included. Manufacturer YILMAZ, Turkey, model CA-603. Year of manufacture - 2013. The machine has never been used, was in a warehouse, stored in the factory packaging. Currently, it is fully tested and configured, it can be connected and shown in operation both during the customer's personal visit to our warehouse, and via a WhatsApp video call.
Upon request, we will send photos and videos of the work.
Location - Samara. Shipment - pickup, delivery by a transport company across the Russian Federation is possible.

Used cleaning machine for PVC profile corners. Model URBAN SV-305, year of manufacture 2005. Made in Germany. Good condition. Tool - conventional cutters, 3 pcs on one shaft, cutters for cleaning grooves for seals, top and bottom, cleaning knives top-bottom for removing the weld.
The equipment is ready for shipment, a fully functional machine, routine repairs, maintenance and adjustments have been carried out. The machine is in warehouse storage at our warehouse in Samara. Upon request, we will provide additional photos and videos.
It is possible to connect and check in the warehouse.

NEW PLASTMAK SC-201_2020 G.V. AUTOMATIC END MILLING MACHINE
NEW MACHINE. Face milling machine for milling imposts, automatic, for processing PVC profiles. Without cooling. Model PLASTMAK SC201. The machine is absolutely new, never used. Warehouse storage in a warm warehouse.
Year of manufacture 2020.
Upon arrival at the warehouse, the machine is connected and checked. Upon request, we can send photos and videos of the work, it is also possible to show the machine via video link or you can come and see in person, we will connect, show the machine in operation.
Sale by bank transfer without VAT, under the contract. We will provide a package of documents - a supply agreement, UPD, an acceptance certificate, a waybill for transportation.

USED ​​BROGEN OKFM-A, 2012. AUTOMATIC MULLION END MILLING MACHINE, TURKEY
Automatic machine for milling the end of the mullion, for one cutter, with pneumatic feed, variable angle, pneumatic clamps. Manufacturer BROGEN, Turkey. Model OKFM-A. Year of manufacture 2012. The condition is excellent, the machine is almost new. Location - Samara. Shipment - pickup, delivery by a transport company is possible. Semi-automatic machine for processing the end of the mullion with a rotary table Brogen OKM-A

OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.