USED ​​MACHINES FOR PVC & ALUMINUM (FROM STOCK)

MURAT KC258, 2017
Two-head welding machine with top feed of heating elements;
- The machine welds the outer surface of the profile with a thickness of 0.2 to 0.4 mm;
- This technology allows you to get a thin front seam on a laminated PVC profile, the appearance of which is much more attractive than standard welding;
- The right welding head allows you to weld profiles only at an angle of 90 degrees, the left one - with a variable angle;
- The right welding head moves manually along the guides;
- The working cycle is automatic;
- The electronic system of the machine allows you to set welding modes (adjust the heating and compression time of the workpieces, the compression force of the workpieces) and constantly monitor them;
- The electronic display on the control panel provides information on all working cycles and emergency failures

MURAT-HAFFNER. SAWING AND PROCESSING CENTER.
Model NR-242
The sawing and processing center is equipped with an automatic cutting module and two processing modules (frame and sash). The capacity is 200-240 pieces per shift.
This center's concept involves first cutting long profiles according to the shift assignment, then transferring frames and sashes cut at 45 degrees, as well as mullions cut at 90 degrees, to the processing module. Before this, the operator inserts reinforcement into the PVC, as further processing is performed on metal. The center is equipped with triple drilling options, a drill for mullion holes in metal, and an automatic dual-head screwdriver for screwing PVC and reinforcement.