FENSTEK & SINON, CHINA (UPVC & ALUM MACHINES)

TEM200 Twin Head End Milling Machine For PVC Window Processing
Feature:
1. End milling machine TEM200 is used for milling the transom and door frames in UPVC and aluminum profile.
2. Two motors are connected with two shafts directly.
3. Milling several pcs profile in one cycle.
4. Milling cutter up and down adjustment as well as left and right adjustment for various section of profile .
5. Big diameter for milling cutter, high cutting speed.
6. Cutter spindle connected by shaft coupling, cutter working precision does not effect motor spindle running precision .

LXDB－250 Aluminium window Automatic End Milling Machine
Features:
1.Used for processing aluminum profile end with massive milling.
2.Universal cutter, no need special milling cutter for different profile. Saving cost and cutter replacing time.
3.Super precision main shaft insured accurate and steady processing
4.Hydraulic Feeding device ensure stable feeding..
5.Convenient tool adjustment meets different processing requirements.

CEM350 Aluminium Window & Door CNC End Milling Machine
Features:
1. Cnc 5 Axis End Milling Machine CEM350 is suitable for forming processing of all kinds of profile end face and step surface.
2. Five-axis automatically end milling machine, no need change end milling cutters, no need additional end milling cutter cost.
3. High processing accuracy: high power Italian spindle motor with higher processing quality. No Burrs.
4. Two separate sets of 3.5 mm saw blade, one of which can be adjusted at 0 °and 90 °. Completely solving gap headache issue.
5. Same section with different length profile can be milled in one time. High volume production.
6. The feeding system is driven by servo motor, the speed and position are adjustable, , the cutting feed is stable and even, the machining precision is high, the surface quality is good.
7. Fully covered structure. Safer and less noisy for operator.

QUATTRO-A
UPVC Window Automatic Welding/Cleaning Production Line(Single Layer)
Whole Machine1. Used for automatically realizing the welding and cleaning of frame or sash, composed of welding unit, transfer unit and corner cleaning unit, etc.2. 0.2mm & 2mm welding auto change through switcher.3. Imported computer control system, with high reliability.4. Production ability between main units matched each other.5. Automatically program and select processing programs.6. Apply to high grade and mass windows production.

MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.

AWSM3
Auto Water Slot Milling Machine (Three Routers)




Feature:1. Water Slot Milling Machine has three independent routing units for automatic routing and drilling of water slots and ventilation hole in PVC profile.2. Adopt advancing Germany technique.3. Sliding and turret clamp buffers allow quick adjustment.4. Auto moving working table ensure nice milling5. Easy adjustment to realize symmetrical milling.6. Optional Mode: TAWSM3 with twin machine head suitable for mass production.

FENSTEK NLHM-100 Triple Drilling PVC Copy Router
Features:
1. The keyhole drilling system located opposite the operator is easy to operate.
2. Hydropneumatic drive device for feeding the drilling system cylinder to reduce labor intensity.
3. Automatic milling of handle hole, Euro groove and various holes or grooves for processing UPVC window profile.
4. Mechanical turret head with memory for fast positioning.
5. Routing by stops or universal template in a ratio of 1:1.
7. Adjustment wheel for convenient adjustment of the milling height. User-friendly design.
8. Equipped with a standard template for holes. Standard template for special design.
9. Centering stop, manual.

DACC120A CNC Double Head Corner Cleaner
Features:
1. Cleaning of welding angle seam for plastic doors and windows
2. Two CNC machine head transport, one-time completion of rectangular frame (fan) two angles cleaning, more efficient.
3. Can complete all kinds of profile facade, upper and lower plane weld, inner angle slope, inner right angle, inner groove and other functions.
4. Adopt spindle motor, high precision.
5. The machine head feed adopts the high precision square rail motion pair, effectively guarantees the machine precision.
6. Single head teaching, you can complete the four-corner program programming, simple and convenient.
7. Based on the industrial control computer platform, the program is specially developed according to the door and window industry; the whole Chinese operation interface is simple and intuitive; the interface is reserved for the enterprise to realize the information management.

ACC120A CNC Corner Cleaner For PVC Window Processing, 2-Axis
Feature:
1. Most stable welcomed mature CNC corner cleaning machine for pvc window processing.
2. Totally 5 cutters(two pieces of vertical milling cutters, two pieces of pulling cutters, one piece of saw blade) will be automatically cleaning surface, vertical and inside rubber gasket groove. No need tool change.
3. The milling cutters are controlled by spindle motor, much more stable, they are in the CNC axis, very easy to adjust.
4. Two axis moved by ball screw shaft.
5. Within 25 seconds finish one corner complete cleaning.
6. Can be linked with horizontal welding machine to become welding & corner cleaning production line for grand imagine and high efficiency.
7. Friendly operation. Quick learning.
8. Optional: one piece of horizontal milling cutter, used for sliding window.

ASD-6000
UPVC Window CNC Screwing Drilling Machine
Features:
1. This auto screw driver machine mainly used for inserting screws to mental profile to fix the reinforcement in upvc profile, and drilling installed holes.
2. Inserting and drilling in one machine. The screw spacing and mounting hole position are evenly distributed automatically
3. Machine head is imported from Germany POWERSURT. High reliability.
4. Imported rack and pinion drive, fast speed and high precision.
5. Two separate working areas, each work area can be placed 4 pcs as client requirement, and the discharge is not stopped.
6. Schneider controlling system based on the windows 7 system. It can be linked with ERP software to data sharing and communication.
7. light curtain can be included as client requirement.
8. Fixture will be probably required as client requirement.

FENSTEK SH-02 SINGLE-HEAD WELDING MACHINE
Features:
1. Single-head welding machine for UPVC windows is specially designed for welding at 90 degrees.
2. It can also weld at different angles between 0 and 180 degrees.
3. PLC-controlled machine operation.
4. Control of two separate clamping devices for easy operation.
5. It can weld white profile (2mm) and color profile (0.2mm). Mode switching is automatic, from the computer.

HW2S260 Double Head Welding Machine for Laminated Profile Welding
FEATURES
1. The double head welding machine for PVC window is specially designed for welding PVC laminated window profile with 0.2mm welding result.
2. High efficiency of welding and surface cleaning in one machine.
3. Manual adjustment can also realize 2mm welding.
4. Unique maximum welding height of 260mm.
5. All movement systems adopt high-precision square bearings.
6. Pneumatic braking device.
7. Solid base and machine structure ensure long service life with high precision.
8. Profile clamp ordered separately can meet the processing requirements of various profiles

Emerald F550
Aluminium Facade Five-axis Machining Center
Features:
1. Aluminium Door And Window Making Machine Emerald F550 is 5 Axis profile machining center.
2. Five Axis Machining Center Emerald F550 can be used for processing aluminium, steel and upvc profiles.
3. Online with ERP software, can realize scanning code and automatic processing.
4. When the profile is clamped at one time, it can complete all the sawing, milling, drilling, tapping, thread drilling and notching at angle in all surfaces except bottom side. Avoid profile surface scratches and damages.
5. Adopts moving beam and moving column gantry frame structure, the movement is more stable, improves the machining rigidity of machine.
6. Adopts imported high-end CNC control system, Germany's Siemens or Italian OSAI.

Emerald F260
Aluminium Facade Four-axis Machining Center
Features:
1. Aluminum Facade Machining Center Emerald F260 is advanced industrial CNC 4-axis profile machining systems.
2. Suitable for aluminum profile and other light alloys, as well as UPVC profile processing.
3. The milling head can drill within a range of 90 ° ~0 ° ~-90 ° with according tools at any position.
4. The machine completes milling, drilling, flexible tapping, grooving, steel drilling(within 3 mm) and other multi-functional precisely in one time, the profile was conveyed by the precise stationary avoid profile damage.
5. Adopts imported high precision linear guide ways, ball screws, gear racks and servo motor, ensuring smooth motion, positioning and processing in high precision.
6. High-quality imported automatic tool change based on automatic travel magazine, minimum the tool change time and rotation noise, maximum stability, precision, and cutting ability.

Emerald T140L
Aluminum Window CNC Laser Machining Center
Features:
1.Advanced cnc machining center with servo turning table and 4 servo clamps.
2. Suitable for aluminum profile (up to 3mm thickness) and steel profiles (up to 2mm thickness) processing with super fast speed (5m/min) and efficiency thanks laser technology. High pressure air compressor (1.6Mpa) and cooling station are included.
3. The machine completes milling, drilling, chamfering, grooving, and other multi-functional precisely in one time.
4. Worktable will be positioned from +90° to -90° variable angle.
5. Auto lift up safety cover assures operator safety.
6. Automatic tool change: standard equipped with hidden 6-position tool magazine, standard equipped with 3 tool holders.
7. Operation in Windows environment Industrial PC with monitor. Friendly machine interface with user-friendly operation.

Emerald T140
Aluminium Window & Door Three Axis Machining Center
Features:
1. Aluminum Curtain Wall Machine Emerald T140 is advanced 3-axis machining center.
2. Suitable for aluminium profile and upvc window profile processing.
3. The machine completes milling, drilling, tapping, chamfering, grooving, steel drilling and other multi-functional precisely in one time.
4. Worktable will be positioned at 0°, +90°and -90°drove by pneumatic cylinder
5. Auto lift up safety cover assure operator safety.
6. Automatic tool change: standard equipped with hidden 6-position tool magazine, standard equipped with 3 tool holders.
7. Operation in Window environment Industrial PC with 19’’ colormonitor. Friendly machine interface with user-friendly operation.
8. Online with ERP software, can realize scanning code and automatic processing.

STORM UPVC Window Profile Cutting Center
Features:
1. UPVC Window Profile Cutting Center is used for auto cutting of the 45°, V-notch and mullion cutting of upvc profile. Suitable for massive production.
2. Download the profile cutting data automatically, without manual input or adjustment.
3. Complete the profile clamping, feeding, cutting automatically. High degree of automation.
4. The machine hand can clamp 8 profiles at one time and finish the cutting of them. High production efficiency.
5. High-speed main shaft cutting. High quality cutting.
6. Linear motion guide. High precision cutting.
7. Three-axis CNC controlling. High degree automation.
8. Imported driving system, close-loop control, high machining precision.

Sapphire C150 Aluminum Window Cutting Center
Features:
1. This CNC aluminium cutting center is used for auto cutting of 45°and 90°cutting of aluminium profile, U-PVC profile.
2. High efficiency production. Finish one cutting within 12 seconds.
3. Feeding-in manipulator controlled by 4 servo motors, can identify kinds of profile to positioned automatically, no need design special jig.
4. Can auto feeding 9 profiles at one time. High production efficiency. 3-4 times higher than CNC Double head cutting saw.
5. Separate Schneider servo motors controlled cutting movement up to down to assurethe high precision and high-volume production.
6. Automatically servo-controlled feeding-out system.
7. One person operates whole cutting center, saving in labor.
8. Cast machinery basement assure stable running.

FENSTEK CMC-4-2500 CNC COPY MILLING MACHINE 2500 MM, SERVO DRIVE
CMC4-2500 CNC Copy Milling Machine for Aluminum Windows and Doors
1. CMC3-2500 aluminum window making machine is an advanced industrial CNC profile processing system - 3+1 axis. The rotary table is equipped with servo motor.
2. Suitable for processing aluminum, PVC and other light metals;
3. The machine can complete milling, drilling, tapping, chamfering, grooving and other multi-functional operations precisely at one time.
4. The working table can be set at any angle from +90° to -90°. The rotary table is driven by servo motor.

FENSTEK CMC-3-2500 CNC COPY MILLING MACHINE 2500 MM
CMC3-2500 CNC Copy Milling Machine for Aluminum Windows and Doors
1. Advanced industrial CNC 3-axis profile machining systems.
2. Suitable for Aluminum, PVC, and other light metal material processing;
3.The machine completes milling, drilling, grooving and other multi-functional precisely in one time.
4. Worktable with pneumatic positioning -90°/0°/+90° .Optional 45 degree milling function is available.