Главная
There are 26 products.
NEW KABAN PB2010 Automatic Milling Machine
NEW KABAN PB2010 AUTOMATIC MILLING MACHINE
Automatic machine for milling the end of the molding KABAN PB2010. The equipment worked for one season, the condition is new. Can be checked in operation. Warehouse storage. Location - Samara. We will send to TK in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN on the road if necessary
Automatic machine for milling the end of the molding KABAN PB2010. The equipment worked for one season, the condition is new. Can be checked in operation. Warehouse storage. Location - Samara. We will send to TK in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN on the road if necessary
$5,600.00
USED KABAN BA2030, 2006 Single Head Welding Machine
USED KABAN BA2030, 2020 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine KABAN BA2030, year of manufacture 2020. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.
Single-head welding machine KABAN BA2030, year of manufacture 2020. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.
$1,850.00
KABAN BB2030, 2021.Twin Head Welding Machine
KABAN BB2030. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2012. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.
The machine is in excellent condition, almost new. Year of manufacture 2012. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.
$8,500.00
KABAN MA2010, 2014 г.в. Twin Head Welding Machine
KABAN MA2010. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2014. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.
The machine is in excellent condition, almost new. Year of manufacture 2014. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.
$11,550.00
KABAN AB1030, 2021 Double Head Mitre Saw
Semi-automatic frontal double-head saw, complete with a stationary roller table for feeding the profile on the left. Model KABAN AB1030. 2021 year of manufacture. Condition of new equipment. Can be checked in operation, we will provide photos and videos upon request. Warehouse storage. Location - Samara. We will send to the transport company in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN for the road if necessary
$11,300.00
USED COMPRESSOR BEZHETSK KV-30
USED COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$3,300.00
USED COMPRESSOR BEZHETSK KV-30
USED COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.
$2,900.00
USED KABAN DD4070, 2007 Water Slot Milling Machine
USED KABAN DD4070, 2007 YEAR OF PRODUCTION. AUTOMATIC MACHINE FOR DRAINAGE, TURKEY
Automatic three-spindle milling machine for drainage model DD4070, manufacturer KABAN, Turkey. Year of manufacture 2007. Condition is excellent. Equipped with three asynchronous motors for drainage channels. The machine is fully equipped, tested in operation. Location - Samara. Shipment - pickup, delivery by a transport company is possible.
Automatic three-spindle milling machine for drainage model DD4070, manufacturer KABAN, Turkey. Year of manufacture 2007. Condition is excellent. Equipped with three asynchronous motors for drainage channels. The machine is fully equipped, tested in operation. Location - Samara. Shipment - pickup, delivery by a transport company is possible.
$1,900.00
NEW OZCELIK ORCA 2014 Glass Bead Saw automatic
NEW OZCELIK ORCA 2014 AUTOMATIC GLAZING BEAD CUTTER
NEW automatic glazing bead cutter OZCELIK ORCA. Made in Turkey. Year of manufacture 2014. The equipment is new, never used, stored in the original packaging from the moment of purchase. Upon arrival at the warehouse, the machine is unpacked, connected, checked for operability. The glazing bead cutter is equipped with a new "native" measuring roller table. Warehouse storage, the equipment is ready for sale. It can be connected and checked, upon request we will send WhatsApp photos and videos of the work. Sale by bank transfer, without VAT. We will provide a package of documents - instructions, supply agreement, UPD, acceptance certificate, TTN for transportation. Sending to TC is possible upon agreement.
NEW automatic glazing bead cutter OZCELIK ORCA. Made in Turkey. Year of manufacture 2014. The equipment is new, never used, stored in the original packaging from the moment of purchase. Upon arrival at the warehouse, the machine is unpacked, connected, checked for operability. The glazing bead cutter is equipped with a new "native" measuring roller table. Warehouse storage, the equipment is ready for sale. It can be connected and checked, upon request we will send WhatsApp photos and videos of the work. Sale by bank transfer, without VAT. We will provide a package of documents - instructions, supply agreement, UPD, acceptance certificate, TTN for transportation. Sending to TC is possible upon agreement.
$2,500.00
USED COMPRESSOR FIAC AB-850, 2015
USED COMPRESSOR FIAC AB-850 PISTON COMPRESSOR
Piston compressor FIAC, model AB-850 for 850 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
Piston compressor FIAC, model AB-850 for 850 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$1,800.00
USED COMPRESSOR REMEZA СБ4-Ф/75Lt, 2012
USED COMPRESSOR REMEZA СБ4-Ф/75Lt PISTON COMPRESSOR
Piston compressor REMEZA СБ4-Ф/75Lt for 880 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
Piston compressor REMEZA СБ4-Ф/75Lt for 880 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$1,700.00
TIANCHEN LJVHFT-CNC-7000 LASER Intelligent Cutting&Milling Center
TIANCHEN LJVHFT-CNC-7000
CNC Aluminum Sawing and Machining Center with Integrated Dual-Laser System
Features:
☆ The production line consists of three sections: a loading zone, a machining/cutting zone, and an unloading zone.
☆ The machining zone comprises two independent units: one for drilling and milling, and one for cutting.
☆ Capable of processing reinforced curtain wall (mullion-transom) profiles.
☆ Supports sawing and milling operations for conversion frames.
☆ The cutting unit performs efficient, continuous, and complex sawing of aluminum profiles at angles of 45°, 90°, and 135°. It also supports cutting at any arbitrary angle within the 45°–135° range.
☆ The drilling and milling unit is located on the infeed side of the main machine and is equipped with high-power (6 kW) milling spindles positioned above, below, in front of, and behind the profile. A laser marking device for engraving lines is positioned in front of the profile, while a laser milling spindle is located behind it.
CNC Aluminum Sawing and Machining Center with Integrated Dual-Laser System
Features:
☆ The production line consists of three sections: a loading zone, a machining/cutting zone, and an unloading zone.
☆ The machining zone comprises two independent units: one for drilling and milling, and one for cutting.
☆ Capable of processing reinforced curtain wall (mullion-transom) profiles.
☆ Supports sawing and milling operations for conversion frames.
☆ The cutting unit performs efficient, continuous, and complex sawing of aluminum profiles at angles of 45°, 90°, and 135°. It also supports cutting at any arbitrary angle within the 45°–135° range.
☆ The drilling and milling unit is located on the infeed side of the main machine and is equipped with high-power (6 kW) milling spindles positioned above, below, in front of, and behind the profile. A laser marking device for engraving lines is positioned in front of the profile, while a laser milling spindle is located behind it.
$0.00
TIANCHEN LJVHFT-CNC-7000 LASER Intelligent Cutting&Milling Center
TIANCHEN LJVHS-CNC-7000
CNC Laser-Equipped Sawing and Machining Center for Aluminum
Machine Technical Specifications
☆ The machine consists of three main zones: a loading zone, a machining zone, and an unloading zone.
☆ The machining zone comprises two independent modules: a drilling/milling module and a sawing module.
☆ Capable of sawing and milling reinforced mullions.
☆ Capable of sawing and milling frames.
☆ Capable of sawing and milling ultra-narrow profiles.
☆ The sawing module enables efficient, continuous cutting of aluminum profiles at compound angles—45°, 90°, and 135°—as well as at any arbitrary angle within the 45° to 135° range.
CNC Laser-Equipped Sawing and Machining Center for Aluminum
Machine Technical Specifications
☆ The machine consists of three main zones: a loading zone, a machining zone, and an unloading zone.
☆ The machining zone comprises two independent modules: a drilling/milling module and a sawing module.
☆ Capable of sawing and milling reinforced mullions.
☆ Capable of sawing and milling frames.
☆ Capable of sawing and milling ultra-narrow profiles.
☆ The sawing module enables efficient, continuous cutting of aluminum profiles at compound angles—45°, 90°, and 135°—as well as at any arbitrary angle within the 45° to 135° range.
$0.00
TIANCHEN LJVHMX-CNC-7000 Intelligent Cutting&Milling Center Curtain Walls
TIANCHEN
LJVHMX-CNC-7000. CNC Laser-Sawing and Machining Center for Aluminum: Designed for Extra-Wide and Facade Profiles
Technical Specifications
☆ Suitable for drilling and milling holes and slots on three sides of aluminum facade profiles; ensures efficient milling and cutting of materials.
☆ Capable of efficient, continuous sawing of aluminum profiles at angles of 45° or 90° (or a combination of 45° at one end and 90° at the other). It can also perform cuts at any angle within a range of ±45°.
☆ The automatic-feed worktable enables continuous, automated clamping of profiles for cutting and machining.
☆ All moving components are equipped with high-precision linear guides, ensuring smooth operation and machining accuracy.
☆ The feeding manipulator is driven by a servo system, allowing for automatic adjustment along the X, Y, and Z axes, as well as automatic clamping based on the profile's cross-section. A high-precision rack-and-pinion drive system ensures accurate feeding.
LJVHMX-CNC-7000. CNC Laser-Sawing and Machining Center for Aluminum: Designed for Extra-Wide and Facade Profiles
Technical Specifications
☆ Suitable for drilling and milling holes and slots on three sides of aluminum facade profiles; ensures efficient milling and cutting of materials.
☆ Capable of efficient, continuous sawing of aluminum profiles at angles of 45° or 90° (or a combination of 45° at one end and 90° at the other). It can also perform cuts at any angle within a range of ±45°.
☆ The automatic-feed worktable enables continuous, automated clamping of profiles for cutting and machining.
☆ All moving components are equipped with high-precision linear guides, ensuring smooth operation and machining accuracy.
☆ The feeding manipulator is driven by a servo system, allowing for automatic adjustment along the X, Y, and Z axes, as well as automatic clamping based on the profile's cross-section. A high-precision rack-and-pinion drive system ensures accurate feeding.
$0.00
TIANCHEN LJVHMX-CNC-7000 Combined Cutting&Milling Center
TIANCHEN X-280. Combined Laser Cutting and Machining Center for Aluminum. For windows, doors, portals, and facades.
Features
☆ The center consists of three main zones: a loading zone, a machining zone, and an unloading zone.
☆ The machining zone includes two independent units: a drilling and milling unit and a cutting (sawing) unit.
☆ Equipped with reinforced supports for cutting and milling operations.
☆ Capable of cutting and milling frames to achieve specific geometric configurations.
☆ Capable of cutting and milling extra-wide profiles.
☆ Suitable for drilling and milling holes and slots on all four sides of aluminum profiles used for windows, doors, and facades, while also enabling efficient cutting.
☆ Highly efficient, continuous processing of corners and profile end-joint depths through integrated composite machining.
Features
☆ The center consists of three main zones: a loading zone, a machining zone, and an unloading zone.
☆ The machining zone includes two independent units: a drilling and milling unit and a cutting (sawing) unit.
☆ Equipped with reinforced supports for cutting and milling operations.
☆ Capable of cutting and milling frames to achieve specific geometric configurations.
☆ Capable of cutting and milling extra-wide profiles.
☆ Suitable for drilling and milling holes and slots on all four sides of aluminum profiles used for windows, doors, and facades, while also enabling efficient cutting.
☆ Highly efficient, continuous processing of corners and profile end-joint depths through integrated composite machining.
$0.00
TIANCHEN GSXZ4-CNC-3200. Dual Spindle CNC Milling&Drilling Center.
TIANCHEN GSXZ4-CNC-3200.
High-speed CNC milling and drilling center. Dual milling spindle configuration.
Features:
☆ Designed for efficient CNC drilling and milling of various holes and slots in aluminum door and window profiles (including drainage slots, lock holes, mounting holes, adhesive injection holes, pin holes, air pressure equalization holes, mullion connection holes, etc.), as well as for the angled cutting of concealed drainage slots.
☆ Equipped with high-precision guide rails, ball screws, rack-and-pinion drives, and a high-quality imported servo system, ensuring stable operation and superior positioning and machining accuracy.
☆ The rotary worktable is driven by a servo motor and can be positioned at any angle within the range of -90°, 0°, to +90°.
High-speed CNC milling and drilling center. Dual milling spindle configuration.
Features:
☆ Designed for efficient CNC drilling and milling of various holes and slots in aluminum door and window profiles (including drainage slots, lock holes, mounting holes, adhesive injection holes, pin holes, air pressure equalization holes, mullion connection holes, etc.), as well as for the angled cutting of concealed drainage slots.
☆ Equipped with high-precision guide rails, ball screws, rack-and-pinion drives, and a high-quality imported servo system, ensuring stable operation and superior positioning and machining accuracy.
☆ The rotary worktable is driven by a servo motor and can be positioned at any angle within the range of -90°, 0°, to +90°.
$0.00
TIANCHEN GSXZ4-CNC-3200. Single Spindle CNC Milling&Drilling Center.
TIANCHEN GSXZ4D-CNC-3200.
High-speed CNC milling and drilling center. Equipped with a single milling spindle.
☆ Designed for high-efficiency CNC drilling and milling of various holes and slots in aluminum door and window profiles (including drainage slots, lock holes, mounting holes, adhesive injection holes, pin holes, pressure-equalization holes, mullion connection holes, etc.), as well as for the diagonal cutting of concealed drainage slots.
☆ High-precision linear guides, ball screws, rack-and-pinion drives, and imported servo systems to ensure smooth motion, high positioning accuracy, and precise machining.
☆ The rotating worktable is driven by a servo motor and can be positioned at any angle within the range of -90°, 0°, and +90°.
☆ Features a 9.0 kW high-speed electric spindle with an automatic tool changer, ensuring stable and reliable performance.
☆ Each set of clamps is driven directly by a servo motor, allowing for rapid, automatic positioning and the ability to bypass obstacles.
High-speed CNC milling and drilling center. Equipped with a single milling spindle.
☆ Designed for high-efficiency CNC drilling and milling of various holes and slots in aluminum door and window profiles (including drainage slots, lock holes, mounting holes, adhesive injection holes, pin holes, pressure-equalization holes, mullion connection holes, etc.), as well as for the diagonal cutting of concealed drainage slots.
☆ High-precision linear guides, ball screws, rack-and-pinion drives, and imported servo systems to ensure smooth motion, high positioning accuracy, and precise machining.
☆ The rotating worktable is driven by a servo motor and can be positioned at any angle within the range of -90°, 0°, and +90°.
☆ Features a 9.0 kW high-speed electric spindle with an automatic tool changer, ensuring stable and reliable performance.
☆ Each set of clamps is driven directly by a servo motor, allowing for rapid, automatic positioning and the ability to bypass obstacles.
$0.00
TIANCHEN LGSGZA-CNC-7000. 4-Axis Gantry Machining Center for Aluminium
TIANCHEN LGSGZA-CNC-7000: High-Speed 4-Axis Gantry-Type Machining Center for Aluminum
Technical Specifications
☆ Designed for the efficient four-axis machining of aluminum profiles—including those for doors, windows, and curtain walls, as well as industrial aluminum profiles—this machine enables drilling and milling on multiple surfaces of a profile in a single clamping setup.
☆ Equipped with an Italian high-speed electric spindle, it allows for drilling and milling at any angle within a range of ±90° with exceptionally high operational efficiency.
☆ The design features a stationary workpiece and a moving gantry, ensuring ease of operation.
☆ The electric spindle utilizes a forced air-cooling and heat-dissipation system, ensuring stable, long-term performance. The front of the spindle is fitted with an "air curtain" device, which effectively protects the spindle bearings from external contaminants and extends their service life.
Technical Specifications
☆ Designed for the efficient four-axis machining of aluminum profiles—including those for doors, windows, and curtain walls, as well as industrial aluminum profiles—this machine enables drilling and milling on multiple surfaces of a profile in a single clamping setup.
☆ Equipped with an Italian high-speed electric spindle, it allows for drilling and milling at any angle within a range of ±90° with exceptionally high operational efficiency.
☆ The design features a stationary workpiece and a moving gantry, ensuring ease of operation.
☆ The electric spindle utilizes a forced air-cooling and heat-dissipation system, ensuring stable, long-term performance. The front of the spindle is fitted with an "air curtain" device, which effectively protects the spindle bearings from external contaminants and extends their service life.
$0.00
TIANCHEN LGZWA7012. High-speed 5-axis gantry-type machining center for aluminum
TIANCHEN LGZWA7012: High-Speed 5-Axis Gantry Machining Center for Aluminum
Features
☆ Designed for the 5-axis machining of aluminum profiles, this center enables milling, drilling, end-cutting, and other machining operations—covering all sides except the bottom surface—in a single workpiece setup.
☆ The machine table is equipped with 8 sets of movable clamps. Their positions along the X-axis can be adjusted automatically based on the length and specific processing requirements of the workpiece, allowing for fully automated clamp positioning.
☆ The work table and main base are constructed from cast iron, while critical structural components—such as the machine frame, crossbeam, and columns—are fabricated from high-quality welded steel. Finite element analysis (FEA) was employed during the design process to ensure an optimal strength-to-weight ratio, as well as superior static, dynamic, and thermal performance.
Features
☆ Designed for the 5-axis machining of aluminum profiles, this center enables milling, drilling, end-cutting, and other machining operations—covering all sides except the bottom surface—in a single workpiece setup.
☆ The machine table is equipped with 8 sets of movable clamps. Their positions along the X-axis can be adjusted automatically based on the length and specific processing requirements of the workpiece, allowing for fully automated clamp positioning.
☆ The work table and main base are constructed from cast iron, while critical structural components—such as the machine frame, crossbeam, and columns—are fabricated from high-quality welded steel. Finite element analysis (FEA) was employed during the design process to ensure an optimal strength-to-weight ratio, as well as superior static, dynamic, and thermal performance.
$0.00
TIANCHEN LJB2H-600×6000. 5-Axis CNC Double Head Saw, 600 mm blades
TIANCHEN LJB2H-600×6000.
5-axis CNC double-head saw with upward-feeding (bottom-feed) blades.
Features:
☆ Suitable for complex-angle, 2D cutting of large-cross-section aluminum profiles.
☆ Employs a 5-axis, fully closed-loop CNC system to ensure precise positioning for both cutting angles and lengths.
☆ The movable saw head is equipped with linear guide rails and a rack-and-pinion drive, ensuring high rigidity and positioning accuracy.
☆ Saw head rotation and blade angle adjustment are driven by servo motors coupled with high-precision gearboxes, guaranteeing superior positioning accuracy.
☆ The saw head rotates on precision cylindrical roller bearings, ensuring smooth and reliable operation.
5-axis CNC double-head saw with upward-feeding (bottom-feed) blades.
Features:
☆ Suitable for complex-angle, 2D cutting of large-cross-section aluminum profiles.
☆ Employs a 5-axis, fully closed-loop CNC system to ensure precise positioning for both cutting angles and lengths.
☆ The movable saw head is equipped with linear guide rails and a rack-and-pinion drive, ensuring high rigidity and positioning accuracy.
☆ Saw head rotation and blade angle adjustment are driven by servo motors coupled with high-precision gearboxes, guaranteeing superior positioning accuracy.
☆ The saw head rotates on precision cylindrical roller bearings, ensuring smooth and reliable operation.
$0.00

