Главная

CEM350 Aluminium Window & Door CNC End Milling Machine
Features:
1. Cnc 5 Axis End Milling Machine CEM350 is suitable for forming processing of all kinds of profile end face and step surface.
2. Five-axis automatically end milling machine, no need change end milling cutters, no need additional end milling cutter cost.
3. High processing accuracy: high power Italian spindle motor with higher processing quality. No Burrs.
4. Two separate sets of 3.5 mm saw blade, one of which can be adjusted at 0 °and 90 °. Completely solving gap headache issue.
5. Same section with different length profile can be milled in one time. High volume production.
6. The feeding system is driven by servo motor, the speed and position are adjustable, , the cutting feed is stable and even, the machining precision is high, the surface quality is good.
7. Fully covered structure. Safer and less noisy for operator.

KABAN MA2010. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2014. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.

NEW KABAN PB2010 AUTOMATIC MILLING MACHINE
Automatic machine for milling the end of the molding KABAN PB2010. The equipment worked for one season, the condition is new. Can be checked in operation. Warehouse storage. Location - Samara. We will send to TK in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN on the road if necessary

LJBZ2540 Automatic Vertical Insulating Glass Assembly Line
Features
• Siemens PLC control system (Germany), touchscreen interface
• Automatic detection of coated and low-e glass
• 3 pairs of soft brushes for online and offline washing of low-e glass
• The washing machine uses stainless steel and is waterproof
• Air heating system
• Automatic fan start and stop
• Noise reduction system
• Online washing speed display
• Intelligent intermittent operation mode, energy saving
• Adjustable pressure plate to maintain a flat pressure surface
• Automatic gas filling: gas concentration can be set and the filling process is displayed online at high gas concentrations
• Connection via aviation plug
• Designed for the production of single-chamber, double-chamber, and structural (stepped) glass double-glazed windows

Vertical Insulating Glass Sealing Robot
Model LJTJ2540
Main Features:
• Japanese Yaskawa servo control system, 8 axes, 7 sets of servo drives, fully automatic and highly efficient sealing machine
• 4 sections, glass storage option
• Toothed belt drive, smooth transmission and precise positioning
• Automatic glass corner sealing with a scraper and roller
• Automatic glass size and adhesive depth measurement
• All automatic functions are manually controlled
• Capable of coating double/triple glazing
• One booster pump set controls two sealant groups (optional)
• Suitable for silicone, polysulfide, and silicone structural sealants
• Can be connected to an insulating glass processing line

LJTB01 Butyl Extruder
Key Features:
Butyl extrusion speed can reach 47 m/min.
• Butyl savings compared to conventional equipment: adhesive consumption reaches 7 g/m.
• Automatic exhaust function ensures continuous butyl application.
• PLC control system, touchscreen.
• Glue-free synchronous belt ensures belt cleanliness.
• Main components are made from materials from renowned German manufacturers, ensuring stable operation.
• Automatic gluing head width adjustment ensures uniform butyl application on both sides thanks to a built-in quick-release control valve.
• Use of a movable vertical butyl feed mechanism and horizontal extrusion is convenient and practical.
• On/off time can be adjusted to suit needs

LJZW2020 Automatic Frame Bending Machine
Key Features
• Siemens 1200 PLC control system with high operating speed
• 4 storage groups
• Automatic cutting and feeding of aluminum frames
• Automatic pin jam prevention during bending and cutting
• Continuous frame bending
• Aluminum frames available in sizes from 6A to 27A
• Various bending tools for different frame sizes
• Pause and reset device for handling equipment malfunctions
• Curved aluminum frame, smooth stainless steel, heat-resistant spacer
• USB port function for direct reading of Excel files

LJGZ 2020 Molecular Sieve Frame Filling Machine
Main Features
• Siemens PLC control system
• Molecular sieve size ranges from 0.5mm to 0.9mm
• Simple and intuitive touchscreen interface
• Machine height can be adjusted to suit frame size
• Automatic loading and refilling of molecular sieve
• Dual discharge tubes increase filling speed
• Adjustable filling time
• Automatic drilling, filling, and sealing
• Main components are imported brands
• Filling with large molecular sieve particles

LJSKJ02
Automatic conveyor for moving filled assembled aluminum frames to the glass unit assembly area on the line.
Standard machine.

Automatic Glass Cutting Line EGCNC6133.
Jumbo glass format, double-sided loading station, glass cutting table with low-e coating removal option, pneumatic breaking table.
Technical Parameters:
1) Top Size Range: Minimum top size: 2400x1500 mm (single surface);
2) Maximum film top size: 6100x3300 mm;
3) X-Axis Travel Speed: 5~25 m/min (adjustable);
4) Y-Axis Travel Speed: 8~12 m/min (adjustable);
5) Feed Speed: 5-25 m/min (adjustable);
6) Number of Pivot Arms: 12 arms (double pivot);
7) Number of Suction Cups per Arm: Four;
8) Power source: AC 380 V / 50 Hz
9) Total unit power: 8-18.5 kW;
10) Compressed air: 0.6~0.8 MPa

LSXZ1B-125 Single-spindle Copy Router Machine PATTERN COPY ROUTING MACHINE is used to process the lock hole, water slot and hardware hole of PVC and aluminum windows and doors. Standard molding board to control the hole size, the copying speed is 1: 1; Equipped with high-speed route copying milling head to ensure the milling accuracy. The double-pitch pattern copying needle design is suitable for different hole sizes. It can process various grooves controlled by the ruler

KABAN BB2030. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2012. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.

USED ​​KABAN BA2030, 2020 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine KABAN BA2030, year of manufacture 2020. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

USED ​​YILMAZ FR225 2017 YEAR OLD COPY-MILLING MACHINE, TURKEY
Manual feed copy-milling machine YILMAZ FR-225, for milling a triple hole for handles, as well as a groove for a lock. Year of manufacture 2017, the machine is in excellent condition. Currently in warehouse storage. Location - Samara. We can send photos and videos WhatsApp, and also demonstrate the work in person if the client comes to the warehouse. We will help with shipment, pack the equipment in stretch film, we can hand it over to the TC. We sell by bank transfer without VAT, contract, acts pp, UPD and TTN.

FENSTEK ADS600*4500 CNC B2B TWO-HEAD FRONT SAW WITH SERVO DRIVE
SUPPLY ON ORDER!!!
TWO-HEAD FRONT SAW FOR ALUMINUM WITH CNC.
Industrial PLC, label printer installed. 600 mm blades, cooling. Maximum cutting length 4500 mm.
Functions:
1. Double-head three-axis front saw with CNC for cutting at any angle.
2. The machine is similar to European models.
3. The machine has a modern control system.
4. The saw blade with direct drive has a lever type of cutting.
5. The saw blades are fed using a hydraulic damping cylinder, ensuring smooth cutting.
6. The imported control system ensures cutting quality.
7. The cutting task can be uploaded to the machine via the network. The cutting length can also be input directly.
8. The servo motor drives the speed reducer, adjusting the cutting angle: 45.0 ° - 135 °.

AVW3000D CNC Vertical Double Layer 4 Point Welding Machine
Features:
1.Double layers for 2 unit one time.High efficiency.
2.Auto positioning and feeding by servo motor. More precise.
3.Solid machinery base and structure ensure long life service with high dimension accuracy.
4.Size tolerance compensation is available to increase welding precision
5.Vertical type occupies less space and is ergonomically good for profile loading.
6.Profile fixture ordered separately can meet various profiles' processing requirement
7.Special “Know — How” technique keep the high corner strength
8.Advanced “Parallel welding “technique is available for the AVW3000P to achieve better
Welding result.

AVW3000 UPVC Window CNC Vertical 4 Point Welding Machine
Features:
1. Four Point Welding Machine is One working cycle, one frame fully automatically UPVC Window Welding Machine.
2. Auto positioning by worldwide famous brand AC servo motor.
3. Solid machinery base and structure ensure long life service with high dimension accuracy.
4. Size tolerance compensation is available to increase welding precision.
5. Vertical type occupies less space and is ergonomically good for profile loading.
6. Profile fixture ordered separately can meet various profiles' processing requirement.
7. Special “Know — How” technique keep the high corner strength.
8. Advanced “Parallel welding “technique is available for the AVW3000P to achieve better Welding result.
9. Optional horizontal model (AHW3000P) is possible to integrate into a welding and cleaning production line with CNC corner cleaning machine at later time.

QUATTRO-W CNC Double Layer Horizontal 4 Point Welding Machine
Features:
1. Top grade PVC window welding machine. Suitable for high quality PVC window manufacturer
2. double layers for 2 unit one time.High efficiency.
3. Seamless and non-seamless function both.
4. Square bearing system guarantee clamping, heating plate, locating plate moving precision
5. The advanced IPC controlling system guarantee user-friendly operation, high precision, long life service , and easy link to other machines or production units.
6. Horizontal type is an ergonomically favorably position for the operator inserting upper profile.
7. Size error compensation is available and high accuracy.
8. Special locating system and impaction device ensured its size precision. Strengthen the corner welding and achieve good corner cleaning effect.

TAWSM3 UPVC Window Double Head Water Slot Milling Machine
Feature:
1. UPVC water slot milling machine mainly used for milling all kinds of water slots and air pressure balance grooves.
2. Two groups of three-axis milling heads along guide, with high precise processing and high production efficiency.
3. The length of milling water slot within 60mm is adjustable and use widely.
4. Absolute milling feeding without professional maintenance and high quality.
5. Apply to high grade and mass windows production.

MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.