USED ​​MACHINES FOR PVC & ALUMINUM (FROM STOCK)

USED ​​URBAN KV2800HF GLAZING UNIT
Glazing and control stand with lifting, manufacturer URBAN, Germany. In good condition. Only compressed air is needed for the equipment to operate. The glazing stand has been tested, it can be demonstrated in operation. Glazing stand without lifting URBAN KV2800HF. Full clamp of the structure at an angle of 90 degrees. The condition is excellent. Only compressed air is needed for the stand to operate.
Location - Samara, warehouse storage. We ship by forklift, side feed, with uncovering.
Shipment - pickup, delivery by a transport company is possible.
Sale - cashless without VAT, we will provide a package of documents - a supply agreement, UPD, acceptance certificates, TTN for the road.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

Double-head automatic front saw FIMTEC SD25/S4. Designed for cutting two PVC or aluminum profiles at the same time. Saw blades 500 mm, in good condition. The cut length of workpieces at 90 and 45 degrees corresponds to the standard, no errors or backlashes are observed. Cutting at an angle is also within the standard, the angles after cutting match the specified parameters.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.

Semi-automatic frontal double-head saw, complete with a stationary roller table for feeding the profile on the left. Model KABAN AB1030. 2021 year of manufacture. Condition of new equipment. Can be checked in operation, we will provide photos and videos upon request. Warehouse storage. Location - Samara. We will send to the transport company in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN for the road if necessary

USED ​​YILMAZ DC421MS_2012 TWO-HEAD FRONT SAW SEMIAUTOMATIC
Two-head front saw, semiautomatic. YILMAZ DC420MS, 2011. The equipment is in excellent condition. The saw has been completely repaired. New screens have been installed on the protective covers, the specified angles and cutting length are normal, the saw blades are in order, the bearings and belts have been replaced, an extension for maximum cuts is available, a new cooling system has been installed, the electronic size indicator works without errors. Absolutely everything has been done on the machine, no additional actions are required for normal operation.
The equipment can be viewed in operation, tested in our warehouse. Sale is possible under a contract, non-cash payment without VAT. We will provide the entire set of documents - supply agreement, UPD, acceptance certificate, TTN. The saw is ready for shipment, we will provide loading onto your transport.
Location: Samara, warehouse storage.