Главная
There are 21 products.
USED URBAN SV-305, 2005 Corner Cleaning Machine
Used cleaning machine for PVC profile corners. Model URBAN SV-305, year of manufacture 2005. Made in Germany. Good condition. Tool - conventional cutters, 3 pcs on one shaft, cutters for cleaning grooves for seals, top and bottom, cleaning knives top-bottom for removing the weld.
The equipment is ready for shipment, a fully functional machine, routine repairs, maintenance and adjustments have been carried out. The machine is in warehouse storage at our warehouse in Samara. Upon request, we will provide additional photos and videos.
It is possible to connect and check in the warehouse.
The equipment is ready for shipment, a fully functional machine, routine repairs, maintenance and adjustments have been carried out. The machine is in warehouse storage at our warehouse in Samara. Upon request, we will provide additional photos and videos.
It is possible to connect and check in the warehouse.
$3,000.00
USED COMPRESSOR BEZHETSK KV-30
USED COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$3,300.00
USED COMPRESSOR BEZHETSK KV-30
USED COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.
$2,900.00
USED PROFTEQ TR65N, 2007 Glass Bead Saw automatic
USED PROFTEQ TR65N, 2007. GLAZING BEAD CUTTING SAW, ITALY
Glazing bead cutter with automatic saw blade feed, model TR65N, manufacturer PROFTEQ, Italy. Year of manufacture 2007, in excellent condition. Without roller conveyor. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.
Glazing bead cutter with automatic saw blade feed, model TR65N, manufacturer PROFTEQ, Italy. Year of manufacture 2007, in excellent condition. Without roller conveyor. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.
$950.00
USED COMPRESSOR FIAC AB-850, 2015
USED COMPRESSOR FIAC AB-850 PISTON COMPRESSOR
Piston compressor FIAC, model AB-850 for 850 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
Piston compressor FIAC, model AB-850 for 850 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$1,800.00
USED COMPRESSOR REMEZA СБ4-Ф/75Lt, 2012
USED COMPRESSOR REMEZA СБ4-Ф/75Lt PISTON COMPRESSOR
Piston compressor REMEZA СБ4-Ф/75Lt for 880 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
Piston compressor REMEZA СБ4-Ф/75Lt for 880 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$1,700.00
TIANCHEN LJVHFT-CNC-7000 LASER Intelligent Cutting&Milling Center
TIANCHEN LJVHFT-CNC-7000
CNC Aluminum Sawing and Machining Center with Integrated Dual-Laser System
Features:
☆ The production line consists of three sections: a loading zone, a machining/cutting zone, and an unloading zone.
☆ The machining zone comprises two independent units: one for drilling and milling, and one for cutting.
☆ Capable of processing reinforced curtain wall (mullion-transom) profiles.
☆ Supports sawing and milling operations for conversion frames.
☆ The cutting unit performs efficient, continuous, and complex sawing of aluminum profiles at angles of 45°, 90°, and 135°. It also supports cutting at any arbitrary angle within the 45°–135° range.
☆ The drilling and milling unit is located on the infeed side of the main machine and is equipped with high-power (6 kW) milling spindles positioned above, below, in front of, and behind the profile. A laser marking device for engraving lines is positioned in front of the profile, while a laser milling spindle is located behind it.
CNC Aluminum Sawing and Machining Center with Integrated Dual-Laser System
Features:
☆ The production line consists of three sections: a loading zone, a machining/cutting zone, and an unloading zone.
☆ The machining zone comprises two independent units: one for drilling and milling, and one for cutting.
☆ Capable of processing reinforced curtain wall (mullion-transom) profiles.
☆ Supports sawing and milling operations for conversion frames.
☆ The cutting unit performs efficient, continuous, and complex sawing of aluminum profiles at angles of 45°, 90°, and 135°. It also supports cutting at any arbitrary angle within the 45°–135° range.
☆ The drilling and milling unit is located on the infeed side of the main machine and is equipped with high-power (6 kW) milling spindles positioned above, below, in front of, and behind the profile. A laser marking device for engraving lines is positioned in front of the profile, while a laser milling spindle is located behind it.
$0.00
TIANCHEN LJVHFT-CNC-7000 LASER Intelligent Cutting&Milling Center
TIANCHEN LJVHS-CNC-7000
CNC Laser-Equipped Sawing and Machining Center for Aluminum
Machine Technical Specifications
☆ The machine consists of three main zones: a loading zone, a machining zone, and an unloading zone.
☆ The machining zone comprises two independent modules: a drilling/milling module and a sawing module.
☆ Capable of sawing and milling reinforced mullions.
☆ Capable of sawing and milling frames.
☆ Capable of sawing and milling ultra-narrow profiles.
☆ The sawing module enables efficient, continuous cutting of aluminum profiles at compound angles—45°, 90°, and 135°—as well as at any arbitrary angle within the 45° to 135° range.
CNC Laser-Equipped Sawing and Machining Center for Aluminum
Machine Technical Specifications
☆ The machine consists of three main zones: a loading zone, a machining zone, and an unloading zone.
☆ The machining zone comprises two independent modules: a drilling/milling module and a sawing module.
☆ Capable of sawing and milling reinforced mullions.
☆ Capable of sawing and milling frames.
☆ Capable of sawing and milling ultra-narrow profiles.
☆ The sawing module enables efficient, continuous cutting of aluminum profiles at compound angles—45°, 90°, and 135°—as well as at any arbitrary angle within the 45° to 135° range.
$0.00
TIANCHEN LJVHMX-CNC-7000 Intelligent Cutting&Milling Center Curtain Walls
TIANCHEN
LJVHMX-CNC-7000. CNC Laser-Sawing and Machining Center for Aluminum: Designed for Extra-Wide and Facade Profiles
Technical Specifications
☆ Suitable for drilling and milling holes and slots on three sides of aluminum facade profiles; ensures efficient milling and cutting of materials.
☆ Capable of efficient, continuous sawing of aluminum profiles at angles of 45° or 90° (or a combination of 45° at one end and 90° at the other). It can also perform cuts at any angle within a range of ±45°.
☆ The automatic-feed worktable enables continuous, automated clamping of profiles for cutting and machining.
☆ All moving components are equipped with high-precision linear guides, ensuring smooth operation and machining accuracy.
☆ The feeding manipulator is driven by a servo system, allowing for automatic adjustment along the X, Y, and Z axes, as well as automatic clamping based on the profile's cross-section. A high-precision rack-and-pinion drive system ensures accurate feeding.
LJVHMX-CNC-7000. CNC Laser-Sawing and Machining Center for Aluminum: Designed for Extra-Wide and Facade Profiles
Technical Specifications
☆ Suitable for drilling and milling holes and slots on three sides of aluminum facade profiles; ensures efficient milling and cutting of materials.
☆ Capable of efficient, continuous sawing of aluminum profiles at angles of 45° or 90° (or a combination of 45° at one end and 90° at the other). It can also perform cuts at any angle within a range of ±45°.
☆ The automatic-feed worktable enables continuous, automated clamping of profiles for cutting and machining.
☆ All moving components are equipped with high-precision linear guides, ensuring smooth operation and machining accuracy.
☆ The feeding manipulator is driven by a servo system, allowing for automatic adjustment along the X, Y, and Z axes, as well as automatic clamping based on the profile's cross-section. A high-precision rack-and-pinion drive system ensures accurate feeding.
$0.00
TIANCHEN LJVHMX-CNC-7000 Combined Cutting&Milling Center
TIANCHEN X-280. Combined Laser Cutting and Machining Center for Aluminum. For windows, doors, portals, and facades.
Features
☆ The center consists of three main zones: a loading zone, a machining zone, and an unloading zone.
☆ The machining zone includes two independent units: a drilling and milling unit and a cutting (sawing) unit.
☆ Equipped with reinforced supports for cutting and milling operations.
☆ Capable of cutting and milling frames to achieve specific geometric configurations.
☆ Capable of cutting and milling extra-wide profiles.
☆ Suitable for drilling and milling holes and slots on all four sides of aluminum profiles used for windows, doors, and facades, while also enabling efficient cutting.
☆ Highly efficient, continuous processing of corners and profile end-joint depths through integrated composite machining.
Features
☆ The center consists of three main zones: a loading zone, a machining zone, and an unloading zone.
☆ The machining zone includes two independent units: a drilling and milling unit and a cutting (sawing) unit.
☆ Equipped with reinforced supports for cutting and milling operations.
☆ Capable of cutting and milling frames to achieve specific geometric configurations.
☆ Capable of cutting and milling extra-wide profiles.
☆ Suitable for drilling and milling holes and slots on all four sides of aluminum profiles used for windows, doors, and facades, while also enabling efficient cutting.
☆ Highly efficient, continuous processing of corners and profile end-joint depths through integrated composite machining.
$0.00
TIANCHEN GSXZ4-CNC-3200. Dual Spindle CNC Milling&Drilling Center.
TIANCHEN GSXZ4-CNC-3200.
High-speed CNC milling and drilling center. Dual milling spindle configuration.
Features:
☆ Designed for efficient CNC drilling and milling of various holes and slots in aluminum door and window profiles (including drainage slots, lock holes, mounting holes, adhesive injection holes, pin holes, air pressure equalization holes, mullion connection holes, etc.), as well as for the angled cutting of concealed drainage slots.
☆ Equipped with high-precision guide rails, ball screws, rack-and-pinion drives, and a high-quality imported servo system, ensuring stable operation and superior positioning and machining accuracy.
☆ The rotary worktable is driven by a servo motor and can be positioned at any angle within the range of -90°, 0°, to +90°.
High-speed CNC milling and drilling center. Dual milling spindle configuration.
Features:
☆ Designed for efficient CNC drilling and milling of various holes and slots in aluminum door and window profiles (including drainage slots, lock holes, mounting holes, adhesive injection holes, pin holes, air pressure equalization holes, mullion connection holes, etc.), as well as for the angled cutting of concealed drainage slots.
☆ Equipped with high-precision guide rails, ball screws, rack-and-pinion drives, and a high-quality imported servo system, ensuring stable operation and superior positioning and machining accuracy.
☆ The rotary worktable is driven by a servo motor and can be positioned at any angle within the range of -90°, 0°, to +90°.
$0.00
TIANCHEN GSXZ4-CNC-3200. Single Spindle CNC Milling&Drilling Center.
TIANCHEN GSXZ4D-CNC-3200.
High-speed CNC milling and drilling center. Equipped with a single milling spindle.
☆ Designed for high-efficiency CNC drilling and milling of various holes and slots in aluminum door and window profiles (including drainage slots, lock holes, mounting holes, adhesive injection holes, pin holes, pressure-equalization holes, mullion connection holes, etc.), as well as for the diagonal cutting of concealed drainage slots.
☆ High-precision linear guides, ball screws, rack-and-pinion drives, and imported servo systems to ensure smooth motion, high positioning accuracy, and precise machining.
☆ The rotating worktable is driven by a servo motor and can be positioned at any angle within the range of -90°, 0°, and +90°.
☆ Features a 9.0 kW high-speed electric spindle with an automatic tool changer, ensuring stable and reliable performance.
☆ Each set of clamps is driven directly by a servo motor, allowing for rapid, automatic positioning and the ability to bypass obstacles.
High-speed CNC milling and drilling center. Equipped with a single milling spindle.
☆ Designed for high-efficiency CNC drilling and milling of various holes and slots in aluminum door and window profiles (including drainage slots, lock holes, mounting holes, adhesive injection holes, pin holes, pressure-equalization holes, mullion connection holes, etc.), as well as for the diagonal cutting of concealed drainage slots.
☆ High-precision linear guides, ball screws, rack-and-pinion drives, and imported servo systems to ensure smooth motion, high positioning accuracy, and precise machining.
☆ The rotating worktable is driven by a servo motor and can be positioned at any angle within the range of -90°, 0°, and +90°.
☆ Features a 9.0 kW high-speed electric spindle with an automatic tool changer, ensuring stable and reliable performance.
☆ Each set of clamps is driven directly by a servo motor, allowing for rapid, automatic positioning and the ability to bypass obstacles.
$0.00
TIANCHEN LGSGZA-CNC-7000. 4-Axis Gantry Machining Center for Aluminium
TIANCHEN LGSGZA-CNC-7000: High-Speed 4-Axis Gantry-Type Machining Center for Aluminum
Technical Specifications
☆ Designed for the efficient four-axis machining of aluminum profiles—including those for doors, windows, and curtain walls, as well as industrial aluminum profiles—this machine enables drilling and milling on multiple surfaces of a profile in a single clamping setup.
☆ Equipped with an Italian high-speed electric spindle, it allows for drilling and milling at any angle within a range of ±90° with exceptionally high operational efficiency.
☆ The design features a stationary workpiece and a moving gantry, ensuring ease of operation.
☆ The electric spindle utilizes a forced air-cooling and heat-dissipation system, ensuring stable, long-term performance. The front of the spindle is fitted with an "air curtain" device, which effectively protects the spindle bearings from external contaminants and extends their service life.
Technical Specifications
☆ Designed for the efficient four-axis machining of aluminum profiles—including those for doors, windows, and curtain walls, as well as industrial aluminum profiles—this machine enables drilling and milling on multiple surfaces of a profile in a single clamping setup.
☆ Equipped with an Italian high-speed electric spindle, it allows for drilling and milling at any angle within a range of ±90° with exceptionally high operational efficiency.
☆ The design features a stationary workpiece and a moving gantry, ensuring ease of operation.
☆ The electric spindle utilizes a forced air-cooling and heat-dissipation system, ensuring stable, long-term performance. The front of the spindle is fitted with an "air curtain" device, which effectively protects the spindle bearings from external contaminants and extends their service life.
$0.00
TIANCHEN LGZWA7012. High-speed 5-axis gantry-type machining center for aluminum
TIANCHEN LGZWA7012: High-Speed 5-Axis Gantry Machining Center for Aluminum
Features
☆ Designed for the 5-axis machining of aluminum profiles, this center enables milling, drilling, end-cutting, and other machining operations—covering all sides except the bottom surface—in a single workpiece setup.
☆ The machine table is equipped with 8 sets of movable clamps. Their positions along the X-axis can be adjusted automatically based on the length and specific processing requirements of the workpiece, allowing for fully automated clamp positioning.
☆ The work table and main base are constructed from cast iron, while critical structural components—such as the machine frame, crossbeam, and columns—are fabricated from high-quality welded steel. Finite element analysis (FEA) was employed during the design process to ensure an optimal strength-to-weight ratio, as well as superior static, dynamic, and thermal performance.
Features
☆ Designed for the 5-axis machining of aluminum profiles, this center enables milling, drilling, end-cutting, and other machining operations—covering all sides except the bottom surface—in a single workpiece setup.
☆ The machine table is equipped with 8 sets of movable clamps. Their positions along the X-axis can be adjusted automatically based on the length and specific processing requirements of the workpiece, allowing for fully automated clamp positioning.
☆ The work table and main base are constructed from cast iron, while critical structural components—such as the machine frame, crossbeam, and columns—are fabricated from high-quality welded steel. Finite element analysis (FEA) was employed during the design process to ensure an optimal strength-to-weight ratio, as well as superior static, dynamic, and thermal performance.
$0.00
TIANCHEN LJB2H-600×6000. 5-Axis CNC Double Head Saw, 600 mm blades
TIANCHEN LJB2H-600×6000.
5-axis CNC double-head saw with upward-feeding (bottom-feed) blades.
Features:
☆ Suitable for complex-angle, 2D cutting of large-cross-section aluminum profiles.
☆ Employs a 5-axis, fully closed-loop CNC system to ensure precise positioning for both cutting angles and lengths.
☆ The movable saw head is equipped with linear guide rails and a rack-and-pinion drive, ensuring high rigidity and positioning accuracy.
☆ Saw head rotation and blade angle adjustment are driven by servo motors coupled with high-precision gearboxes, guaranteeing superior positioning accuracy.
☆ The saw head rotates on precision cylindrical roller bearings, ensuring smooth and reliable operation.
5-axis CNC double-head saw with upward-feeding (bottom-feed) blades.
Features:
☆ Suitable for complex-angle, 2D cutting of large-cross-section aluminum profiles.
☆ Employs a 5-axis, fully closed-loop CNC system to ensure precise positioning for both cutting angles and lengths.
☆ The movable saw head is equipped with linear guide rails and a rack-and-pinion drive, ensuring high rigidity and positioning accuracy.
☆ Saw head rotation and blade angle adjustment are driven by servo motors coupled with high-precision gearboxes, guaranteeing superior positioning accuracy.
☆ The saw head rotates on precision cylindrical roller bearings, ensuring smooth and reliable operation.
$0.00
TIANCHEN LJB2EA-CNC-650×6000. 3-Axis CNC Double Head Saw, 650 mm blades
TIANCHEN LJB2EA-CNC-650×6000.
CNC-controlled, 3-axis, dual-head front-loading saw.
Machine Technical Specifications
☆ Designed for efficient, high-precision cutting of aluminum profiles at any desired angle.
☆ Equipped with a powerful imported (Italian-made) electric motor with a direct drive to the saw blade; the saw blade feed mechanism utilizes a swing-arm (pendulum-style) design.
☆ The saw blade feed is controlled by a pneumatic-hydraulic damping cylinder, ensuring a stable cutting process.
☆ Uses high-precision, imported carbide-tipped saw blades, guaranteeing a high-quality (smooth) cut surface.
☆ The cutting angle (ranging from 45° to 157.5°) is adjusted via a servo motor and a reduction gear.
☆ Supports advanced functionality, including the import of cutting data in various formats.
CNC-controlled, 3-axis, dual-head front-loading saw.
Machine Technical Specifications
☆ Designed for efficient, high-precision cutting of aluminum profiles at any desired angle.
☆ Equipped with a powerful imported (Italian-made) electric motor with a direct drive to the saw blade; the saw blade feed mechanism utilizes a swing-arm (pendulum-style) design.
☆ The saw blade feed is controlled by a pneumatic-hydraulic damping cylinder, ensuring a stable cutting process.
☆ Uses high-precision, imported carbide-tipped saw blades, guaranteeing a high-quality (smooth) cut surface.
☆ The cutting angle (ranging from 45° to 157.5°) is adjusted via a servo motor and a reduction gear.
☆ Supports advanced functionality, including the import of cutting data in various formats.
$0.00
TIANCHEN LJJD-CNC-600. Автоматическая пила для серийной резки профилей с большим сечением, пильный диск 600 мм
TIANCHEN LJJD-CNC-600. Automatic saw for batch cutting of large-cross-section profiles, equipped with a 600 mm saw blade.
Technical Specifications
☆ This machine is primarily designed for the batch cutting of curtain wall brackets, angle profiles, and for 90-degree cutting of large-cross-section industrial aluminum profiles.
☆ It utilizes a carbide-tipped saw blade, combined with a high-power motor, to ensure fast cutting speeds, high productivity, and precise processing.
☆ The machine is easy to operate, reliable, efficient, and simple to maintain.
☆ Equipped with a Siemens servo motor and a ball screw, it offers highly accurate positioning and a high degree of automation.
☆ Featuring a Siemens touchscreen interface, the controls are simple and intuitive.
Technical Specifications
☆ This machine is primarily designed for the batch cutting of curtain wall brackets, angle profiles, and for 90-degree cutting of large-cross-section industrial aluminum profiles.
☆ It utilizes a carbide-tipped saw blade, combined with a high-power motor, to ensure fast cutting speeds, high productivity, and precise processing.
☆ The machine is easy to operate, reliable, efficient, and simple to maintain.
☆ Equipped with a Siemens servo motor and a ball screw, it offers highly accurate positioning and a high degree of automation.
☆ Featuring a Siemens touchscreen interface, the controls are simple and intuitive.
$0.00
TIANCHEN LJKA-600. Automatic Notching Saw
TIANCHEN LJKA-600 Automatic Notching Saw
Machine Features:
☆ Designed for processing aluminum curtain walls and roof skylights, specifically for cutting profiles at custom end-surface angles.
☆ Equipped with a magnetic scale control system, as well as digital displays for the cutting angle and worktable height.
☆ The worktable and positioning mechanism are easily adjustable, allowing for the processing of profile ends at specific, non-standard angles.
☆ Both saw blades can be freely adjusted to any angle between 0º and -45º.
Machine Features:
☆ Designed for processing aluminum curtain walls and roof skylights, specifically for cutting profiles at custom end-surface angles.
☆ Equipped with a magnetic scale control system, as well as digital displays for the cutting angle and worktable height.
☆ The worktable and positioning mechanism are easily adjustable, allowing for the processing of profile ends at specific, non-standard angles.
☆ Both saw blades can be freely adjusted to any angle between 0º and -45º.
$0.00
TIANCHEN LXD5S-CNC-400. CNC End Milling Machine
TIANCHEN LXD5S-CNC-400: 5-axis CNC end-milling and trimming machine for transoms (mullions).
Technical Specifications
☆ Designed for end-milling the surfaces of aluminum door and window profiles.
☆ Equipped with two sets of spindle-driven milling motors, allowing for a total of four milling cutters to be installed. Each spindle motor can automatically perform both vertical and horizontal milling operations.
☆ The feed system utilizes servo control to ensure automatic positioning and milling for all cutting tools, eliminating the need for manual tool setup. The cutter feed is smooth and consistent, delivering high cutting precision and excellent surface quality.
☆ Features a visual control interface that allows for the adjustment of cutting parameters—such as the number of passes and feed speed—to accommodate various profile specifications; the system is flexible, user-friendly, and highly accurate.
☆ Supports scan-code processing for ease of operation.
Technical Specifications
☆ Designed for end-milling the surfaces of aluminum door and window profiles.
☆ Equipped with two sets of spindle-driven milling motors, allowing for a total of four milling cutters to be installed. Each spindle motor can automatically perform both vertical and horizontal milling operations.
☆ The feed system utilizes servo control to ensure automatic positioning and milling for all cutting tools, eliminating the need for manual tool setup. The cutter feed is smooth and consistent, delivering high cutting precision and excellent surface quality.
☆ Features a visual control interface that allows for the adjustment of cutting parameters—such as the number of passes and feed speed—to accommodate various profile specifications; the system is flexible, user-friendly, and highly accurate.
☆ Supports scan-code processing for ease of operation.
$0.00
TIANCHEN LM4XSA- 140×2200×3000. CNC 4-Head Corner Crimping Line
TIANCHEN LM4XSA- 140×2200×3000.CNC Corner Crimping Line for Aluminum Frames and CasementsFeatures:☆ Servo-driven automatic adjustment of the internal corner-crimping heads—ideal for processing aluminum windows and doors of various types, even for small-batch or custom production runs.☆ Automatic adjustment of the front and rear upper clamps, the height of the horizontal auxiliary external positioning block, and the position of the internal positioning blocks—ensures precise alignment for different profiles, prevents distortion or shifting of the window frame during assembly, and guarantees the accuracy of the corner joint.☆ Automatic adjustment of the height, depth, and positioning of the crimping blades—allows for rapid, fully automated reconfiguration when switching between different profiles or corner types, with no manual intervention required.
$0.00

