Главная

NEW PLASTMAK SC401, 2020 YEAR OF PRODUCTION. SINGLE-HEAD SAW WITH BOTTOM FEED, TURKEY
NEW Single-head saw with bottom feed, for cutting PVC profiles. Disc 420 mm, vertical pneumatic clamps. Roller conveyor included. Manufacturer PLASTMAK, Turkey. Model SC401. Year of manufacture - 2020, good condition. Warehouse storage, it is possible to connect and check the functionality.
Location - Samara. Shipment - pick-up, delivery by a transport company in the Russian Federation is possible.

NEW PLASTMAK SC301 2020 AUTOMATIC GLAZING BEAD CUTTER
NEW automatic PLASTMAK SC301 glazing bead cutter. Made in Turkey. Year of manufacture 2020. The equipment is new, never used, stored in the original packaging from the moment of purchase. Upon arrival at the warehouse, the machine is unpacked, connected, checked for operability. The glazing bead cutter is equipped with a new "native" measuring roller table. Warehouse storage, the equipment is ready for sale. You can connect and check, upon request we will send WhatsApp photos and videos of the work. Sale by bank transfer, without VAT. We will provide a package of documents - instructions, supply agreement, UPD, acceptance certificate, TTN for transportation. Sending to TC is possible upon agreement.

USED ​​KABAN BA2030, 2020 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine KABAN BA2030, year of manufacture 2020. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

USED ​​YILMAZ FR225 2017 YEAR OLD COPY-MILLING MACHINE, TURKEY
Manual feed copy-milling machine YILMAZ FR-225, for milling a triple hole for handles, as well as a groove for a lock. Year of manufacture 2017, the machine is in excellent condition. Currently in warehouse storage. Location - Samara. We can send photos and videos WhatsApp, and also demonstrate the work in person if the client comes to the warehouse. We will help with shipment, pack the equipment in stretch film, we can hand it over to the TC. We sell by bank transfer without VAT, contract, acts pp, UPD and TTN.

NEW PLASTMAK SC-201_2020 G.V. AUTOMATIC END MILLING MACHINE
NEW MACHINE. Face milling machine for milling imposts, automatic, for processing PVC profiles. Without cooling. Model PLASTMAK SC201. The machine is absolutely new, never used. Warehouse storage in a warm warehouse.
Year of manufacture 2020.
Upon arrival at the warehouse, the machine is connected and checked. Upon request, we can send photos and videos of the work, it is also possible to show the machine via video link or you can come and see in person, we will connect, show the machine in operation.
Sale by bank transfer without VAT, under the contract. We will provide a package of documents - a supply agreement, UPD, an acceptance certificate, a waybill for transportation.

NEW OZCELIK VEGA-IIA_AUTOMATIC SINGLE-HEAD PENDULUM SAW
Single-head aluminum saw Ozcelik Vega II A 400 with pendulum feed of the saw blade and coolant supply system, which is designed for cutting aluminum profiles and non-ferrous metals. Automatic feed of the saw blade. Cutting safety is ensured by a double spring system and a protective cover.
The cutting angle can be changed within the range from -45° to the right to +45° to the left. The main angles -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° have a clear fixation, other intermediate angles are set according to a graduated scale. The workpiece is fixed on the vega-2 thanks to two vertical and two horizontal pneumatic clamps.
THE PRICE OF THE MACHINE INCLUDES A 3.0 M MEASURING ROLLER UNIT.

3+1 Axis CNC CONTROLLED COPY ROUTER MACHINE
Brand: China SinonModel: GCGZD-CNC-800Input power source: 380V/50Hz or CustomziedTotal power: 5KwMain spindle power: 3.5kwMain spindle speed: 0-18000rpmX axis processing range: 800mmY axis processing range: 200mmZ axis processing range: 145mmDimension: 1300×1500×1700mmWeight: 800kg

SINON LJRZ2-CNC-600 * 6000
DOUBLE HEAD CNC AUTOMATIC CUTTING MACHINE, ARBITRARY ANGLES ADJUST
1. The double head CNC front saw is an advanced equipment used for cutting aluminum profiles.
2. This machine has a neat and stylish appearance, modeled on the European style.
3. The new closed-loop control system used in this machine is highly efficient, ensuring precise cutting.
4. The machine is equipped with a direct drive saw blade, which uses a lever-turn cutting type, making the blade feed by the pneumatic-hydraulic damping cylinder and ensuring smooth cutting.
5. The imported saw blade used in this machine has high precision, making the cutting surface smooth.
6. The cutting angle of the machine can be adjusted in the range of 45°~157.5° by the servo motor driving the speed reducer.

Thermal Break Assembly Machine

Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of knurling machine with strip feeder device
1 set of rolling machine
Daily capacity is 5~6 Tons per 10 hours

Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours

KABAN BB2030. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2012. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.

SINON SJ02-350 SINGLE-HEAD PENDULUM SAW
Automatic single-head pendulum saw for cutting PVC profiles (350mm) Saw blade Φ350mm×φ30mm. Cutting width: Max 200mm Cutting height: Max 100mm. Cutting angle: 45/90/135

KABAN MA2010. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2014. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.

1. Used to assembly hardware systems such as Tilt, Tilt & Turn, Parallel Slide, Pivot, Slide-fold, Double Sash and Sliding Systems on different types, various sizes of window & door sash profiles without tape measure and pencil using, without need for molds and templates, provides speedy, high quality and standard assembling.2.Equipped with an industrial computer and a barcode scanner, it can be connected to other machines on the production line for data exchange3.Sash Assembly table4.Servo positioning espagnolette punching device, used for punching locking strips of various types of window sashes5.Full Automatic Screwing, Automatic screw feeding unit, Infrared indicator .6.Movable, adjustable triple handle hole drilling group with reinforced profile & upvc profile together.7.Latch Slot milling8.Two Holes Drilling On the sash with Stopper

Aluminium Profile Cutting And Machining Center

Its super-efficient workstation with integrates ERP door and window software + 3-angles efficient sawing + 3-station 4-direction 8-axis drilling and milling + laser scribingModel: SZA610Input Voltage: 380V/50Hz/3P or CustomizedTotal power: 45.55KWSaw blade specifications:∮550*4.4*∮30*120Sawing angle +45º 90°-45°Sectional size of sawed profile (width×height):180*150mmWeight about 12T

Tool Change CNC Aluminium Processing Machine HANS System

Model:GCGZD-CNC series, GCGZD-CNC-2500/3000/3500(X-way stroke)Power:380V 50Hz 3P or customizationCNC processing machine for aluminium profile, full automatic aluminium profile milling and drilling machine

SINON SHQXJ01 Welding & Corner Cleaning Line
/ Welding cleaning production line for pvc door and window / SHQXJ01 /
The production line is specialized in welding and cleaning outer corners of colored PVC profiles. It can be welded and formed into a rectangular window frame at one time, and the upper and lower welds are cleaned. Then, the completed window is transferred to the corner cleaning unit through the transfer workbench to complete the corner cleaning of the window. CNC Corner Cleaning

SINON SHQXJ02 Welding & Corner Cleaning Line UPVC
HORIZONTAL 4-HEAD WELDING MACHINE, DOUBLE CORNER CLEANING STATION

Features:
The production line is specialized in welding and cleaning outer corners of colored PVC profiles. It can be welded and formed into a rectangular window frame at one time, and the upper and lower welds are cleaned. Then, the completed window is transferred to the corner cleaning unit through the transfer workbench to complete the corner cleaning of the window. Double CNC Corner Cleaning Station.

CNC Aluminium Profile Milling Machine
SINON GCGZD-CNC-3000
Input power: 380V/50Hz or customized voltageTotal power: 7.5KwMain spindle speed: 0-24000rpmX axis processing range: 2500mmY axis processing range: 300mmZ axis processing range: 330mmDimension: 4600×1350×1900mmWeight: 2000kg