Главная

DS-ICT3826-A Multifunctional Glass Cutting Table
Integrated glass cutting table: it combines three functions: loading, cutting, and
breaking glass. It has a smaller footprint, more features, and is flexible and convenient!
The operating process is as follows: the rotating arm flips over and extends forward. Upon contact with the glass, the suction cup begins to pick up the glass. Once a vacuum is achieved, the suction cup arm retracts and lowers. The glass is placed horizontally on the work table. The fan turns on, the positioning stand rises, bringing the glass closer to the positioning stand. The fan then turns off, and the positioning stand lowers, after which cutting begins. After the glass is cut, the fan turns on to break the glass on the work table. The glass is separated into small pieces using a breaking rod. The small pieces are removed, the work table is cleared, and then the next cycle begins.

DS-ICT3826-A-B-T Multifunctional Glass Cutting Table
Integrated glass cutting table: it combines three functions: loading, cutting, and
breaking glass. It has a smaller footprint, more features, and is flexible and convenient!
The operating process is as follows: the rotating arm flips over and extends forward. Upon contact with the glass, the suction cup begins to pick up the glass. Once a vacuum is achieved, the suction cup arm retracts and lowers. The glass is placed horizontally on the work table. The fan turns on, the positioning stand rises, bringing the glass closer to the positioning stand. The fan then turns off, and the positioning stand lowers, after which cutting begins. After the glass is cut, the fan turns on to break the glass on the work table. The glass is separated into small pieces using a breaking rod. The small pieces are removed, the work table is cleared, and then the next cycle begins.

DS-CM4228-D1
Automatic glass cutting line.
Complete set consisting of a loading station, glass cutting table, and glass breaking table.
Technical Specifications
1) Cutting speed - 180 m/min
2) Cutting acceleration - 6-8 m/s²
3) Linear accuracy - ±0.15 mm
4) Perimeter cutting accuracy - ±0.2 mm
5) Diagonal accuracy - ±0.35 mm/m²
6) Cutting thickness range - 3-19 mm
7) Glass format - from 4200×2800 mm to 18000×330

DS-CM6133-D1
Automatic glass cutting line.
Complete set consisting of a loading station, glass cutting table, and glass breaking table.
Technical Specifications
1) Cutting speed - 180 m/min
2) Cutting acceleration - 6-8 m/s²
3) Linear accuracy - ±0.15 mm
4) Perimeter cutting accuracy - ±0.2 mm
5) Diagonal accuracy - ±0.35 mm/m²
6) Cutting thickness range - 3-19 mm
7) Glass format - from 6100×3300 mm to 18000×330

DISAI DS-LP2520-90 Intelligent Glass Sorting System
DISAI DS-LP2520-90 Intelligent Glass Sorting System
Description
Vertical glass sorting station: Its primary function is to sort cut glass by customer name, size, and type, and correctly label it for easy identification.
Operating process: Start the equipment, place each glass on the receiving table, and then transfer it to the measuring table (the code has been scanned or the size has been measured during the transfer process, and the glass has been identified). Different glasses will be placed in different bins, and once all the glasses are in the bins, workers can choose how to remove them from the bin. Sorting can be performed by customer, by size, by glass type, or in pairs with specific bins.

DS-DR-ISS4228-AB6  Intelligent Sheet Glass Storage System
SYSTEM DESCRIPTION
Intelligent Glass Storage System: The DISAI intelligent drawer-type glass storage system consists of four components: a glass rack, chassis, power unit, protective net, and control system. It can record the type and quantity of glass in each rack and quickly switch between glass types for efficient production.
Storage system functionality:
1) Can be connected to an office ERP system for real-time inventory data transfer.
2) Easily handle glass of various sizes.
3) The quantity and type of glass in the warehouse can be tracked at any time.
4) Can improve glass production productivity and reduce waste.
5) Increases production efficiency and reduces glass handling time.

LSXZ1B-125 Single-spindle Copy Router Machine PATTERN COPY ROUTING MACHINE is used to process the lock hole, water slot and hardware hole of PVC and aluminum windows and doors. Standard molding board to control the hole size, the copying speed is 1: 1; Equipped with high-speed route copying milling head to ensure the milling accuracy. The double-pitch pattern copying needle design is suitable for different hole sizes. It can process various grooves controlled by the ruler

1. Used to assembly hardware systems such as Tilt, Tilt & Turn, Parallel Slide, Pivot, Slide-fold, Double Sash and Sliding Systems on different types, various sizes of window & door sash profiles without tape measure and pencil using, without need for molds and templates, provides speedy, high quality and standard assembling.2.Equipped with an industrial computer and a barcode scanner, it can be connected to other machines on the production line for data exchange3.Sash Assembly table4.Servo positioning espagnolette punching device, used for punching locking strips of various types of window sashes5.Full Automatic Screwing, Automatic screw feeding unit, Infrared indicator .6.Movable, adjustable triple handle hole drilling group with reinforced profile & upvc profile together.7.Latch Slot milling8.Two Holes Drilling On the sash with Stopper

Double-head automatic front saw FIMTEC SD25/S4. Designed for cutting two PVC or aluminum profiles at the same time. Saw blades 500 mm, in good condition. The cut length of workpieces at 90 and 45 degrees corresponds to the standard, no errors or backlashes are observed. Cutting at an angle is also within the standard, the angles after cutting match the specified parameters.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

Aluminium Profile Cutting And Machining Center

Its super-efficient workstation with integrates ERP door and window software + 3-angles efficient sawing + 3-station 4-direction 8-axis drilling and milling + laser scribingModel: SZA610Input Voltage: 380V/50Hz/3P or CustomizedTotal power: 45.55KWSaw blade specifications:∮550*4.4*∮30*120Sawing angle +45º 90°-45°Sectional size of sawed profile (width×height):180*150mmWeight about 12T

Tool Change CNC Aluminium Processing Machine HANS System

Model:GCGZD-CNC series, GCGZD-CNC-2500/3000/3500(X-way stroke)Power:380V 50Hz 3P or customizationCNC processing machine for aluminium profile, full automatic aluminium profile milling and drilling machine

SINON - CHINESE EQUIPMENT FROM A LARGE FACTORY.
EXCLUSIVELY IN RUSSIA. WE GUARANTEE THE BEST QUALITY.
IN STOCK SALE, IN STOCK from an authorized dealer. LEASING AVAILABLE
SINON SZA-400. CNC MILLING MACHINE FOR PROCESSING END CUTTING OF ALUMINUM PROFILES.
Specifications
Used for milling end cutting of aluminum profiles for doors and windows.
Model: SZA400
Power voltage: 380 V, 50 Hz
Total equipment power: 11 kW
Spindle speed: 2850 rpm
Workbench width: 595 mm
Diameter: φ30 mm
Cutter diameter: φ350 mm
Maximum milling depth: 120 mm
Maximum milling height: 200 mm
Dimensions: 2880 x 1880 x 2160 mm
Weight: 1950 kg

SINON - CHINESE EQUIPMENT FROM A LARGE FACTORY.
EXCLUSIVELY IN RUSSIA. WE GUARANTEE THE BEST QUALITY.
IN STOCK SALE, IN STOCK from an authorized dealer. LEASING AVAILABLE
SINON SZA-400V. CNC MILLING MACHINE FOR PROCESSING END CUTTING OF ALUMINUM PROFILES.
Specifications
Used for milling end cutting of aluminum profiles for doors and windows.  Variable Angle of Milling
Model: SZA400V
Power voltage: 380 V, 50 Hz
Total equipment power: 11 kW
Spindle speed: 2850 rpm
Workbench width: 595 mm
Diameter: φ30 mm
Cutter diameter: φ350 mm
Maximum milling depth: 120 mm
Maximum milling height: 200 mm
Dimensions: 2880 x 1880 x 2160 mm
Weight: 1950 kg

Aluminium Profile Cutting And Machining Center

Its super-efficient workstation with integrates ERP door and window software + 3-angles efficient sawing + 3-station 4-direction 8-axis drilling and milling + laser scribingModel: SZA610Input Voltage: 380V/50Hz/3P or CustomizedTotal power: 45.55KWSaw blade specifications:∮550*4.4*∮30*120Sawing angle +45º 90°-45°Sectional size of sawed profile (width×height):180*150mmWeight about 12T

SINON SHQXJ01 Welding & Corner Cleaning Line
/ Welding cleaning production line for pvc door and window / SHQXJ01 /
The production line is specialized in welding and cleaning outer corners of colored PVC profiles. It can be welded and formed into a rectangular window frame at one time, and the upper and lower welds are cleaned. Then, the completed window is transferred to the corner cleaning unit through the transfer workbench to complete the corner cleaning of the window. CNC Corner Cleaning

SINON SHQXJ02 Welding & Corner Cleaning Line UPVC
HORIZONTAL 4-HEAD WELDING MACHINE, DOUBLE CORNER CLEANING STATION

Features:
The production line is specialized in welding and cleaning outer corners of colored PVC profiles. It can be welded and formed into a rectangular window frame at one time, and the upper and lower welds are cleaned. Then, the completed window is transferred to the corner cleaning unit through the transfer workbench to complete the corner cleaning of the window. Double CNC Corner Cleaning Station.

CNC Aluminium Profile Milling Machine
SINON GCGZD-CNC-3000
Input power: 380V/50Hz or customized voltageTotal power: 7.5KwMain spindle speed: 0-24000rpmX axis processing range: 2500mmY axis processing range: 300mmZ axis processing range: 330mmDimension: 4600×1350×1900mmWeight: 2000kg

3+1 Axis CNC CONTROLLED COPY ROUTER MACHINE
Brand: China SinonModel: GCGZD-CNC-800Input power source: 380V/50Hz or CustomziedTotal power: 5KwMain spindle power: 3.5kwMain spindle speed: 0-18000rpmX axis processing range: 800mmY axis processing range: 200mmZ axis processing range: 145mmDimension: 1300×1500×1700mmWeight: 800kg

SINON DX05A-200 PVC AND ALUMINUM MILLING MACHINE. CUTTERS 200 MM.
End Milling Machine For Aluminum Profile DX05A-200 / Medium-type end milling machine / Used for milling the end surface of aluminum profiles for windows and doors DESCRIPTION: ● The cutter disc is simple, thanks to the original design of the interaction of two cutting discs. ● Gas-driven and spray cooling system improves the milling effect and increases the durability of the tool. ● Thanks to the precise manufacturing process, the rotation of the axis and the bearing seat becomes more stable, the noise and vibration are much lower than other models.