Главная

CCM160 Aluminum Window Corner Crimping Machine
Features:
(1) Aluminum window corner crimping machine is used for high efficient assembly of aluminium window and door.
(2) It is driven by air pressure, the action is faster and more stable, and there is no noise, no pollution, safe and reliable.
(3) Fast cutter locking device, adjust tool up and down (magnet type) faster.
(4) Corner crimping height 160 mm, five seconds one corner.
(5) The left and right corner crimping cutter can be adjusted separately, have good synchronism and high quality of corner crimping.
(6) Kinds of assistant position system suit for different window dimension.
(7) More energy saving and environmental protection, the total electricity consumption is less than 100W, greatly reducing the cost of use.

CCM120 CORNER CRIMPING MACHINE 120 mm
Aluminum Window Corner Crimping Machine
Features:
1. Aluminum corner crimper mainly used for crimping the 90 corner of aluminum window and door
2. Adopt new mechanical linkage device ,realized complete synchronous corner combining
3. Adjustable locating device suitable for various sections and sizes processing
4. Left and right punching heads adopt hard synchronous feeding device ,thus avoideduseless deformation and made the connection more firmly.
5. Easy machine setting due to the synchronous feeding device.

TEM200 Twin Head End Milling Machine For PVC Window Processing
Feature:
1. End milling machine TEM200 is used for milling the transom and door frames in UPVC and aluminum profile.
2. Two motors are connected with two shafts directly.
3. Milling several pcs profile in one cycle.
4. Milling cutter up and down adjustment as well as left and right adjustment for various section of profile .
5. Big diameter for milling cutter, high cutting speed.
6. Cutter spindle connected by shaft coupling, cutter working precision does not effect motor spindle running precision .

LXDB－250 Aluminium window Automatic End Milling Machine
Features:
1.Used for processing aluminum profile end with massive milling.
2.Universal cutter, no need special milling cutter for different profile. Saving cost and cutter replacing time.
3.Super precision main shaft insured accurate and steady processing
4.Hydraulic Feeding device ensure stable feeding..
5.Convenient tool adjustment meets different processing requirements.

MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.

TAWSM3 UPVC Window Double Head Water Slot Milling Machine
Feature:
1. UPVC water slot milling machine mainly used for milling all kinds of water slots and air pressure balance grooves.
2. Two groups of three-axis milling heads along guide, with high precise processing and high production efficiency.
3. The length of milling water slot within 60mm is adjustable and use widely.
4. Absolute milling feeding without professional maintenance and high quality.
5. Apply to high grade and mass windows production.

HW2S260 Double Head Welding Machine for Laminated Profile Welding
FEATURES
1. The double head welding machine for PVC window is specially designed for welding PVC laminated window profile with 0.2mm welding result.
2. High efficiency of welding and surface cleaning in one machine.
3. Manual adjustment can also realize 2mm welding.
4. Unique maximum welding height of 260mm.
5. All movement systems adopt high-precision square bearings.
6. Pneumatic braking device.
7. Solid base and machine structure ensure long service life with high precision.
8. Profile clamp ordered separately can meet the processing requirements of various profiles

FENSTEK SH-02 SINGLE-HEAD WELDING MACHINE
Features:
1. Single-head welding machine for UPVC windows is specially designed for welding at 90 degrees.
2. It can also weld at different angles between 0 and 180 degrees.
3. PLC-controlled machine operation.
4. Control of two separate clamping devices for easy operation.
5. It can weld white profile (2mm) and color profile (0.2mm). Mode switching is automatic, from the computer.

ADSSE Auto Screw Driver Machine for UPVC Window Features:
1. Auto Screw Driver Machine is a stationary Screwdriver. Advancing Unit with integrated Screw Feeder to insert screws into wood, plastics or metal, e. g. to fix the reinforcement in UPVC profiles.
2. Automatic: Integrated screw feeding system and automatic start of the hopper movement when operating.
3. Flexible Production: Work piece height (screwing level) can vary between 35 and 95 mm above the base plate. 4. High Efficiency: Screw driving cycle time to insert one self-drilling screw (3,9 x 19mm) for reinforcement fixing approx. 2 seconds.
5. Stable: Feed capacity 30 or 80 screws per minute depending on dimension of screw

ADSSE2 UPVC Window & Door Auto Screw Driver Machine Feature:
1. Auto screw driver machine ADSSE2 is a stationary Screwdriver Advancing Unit with integrated Screw Feeder to insert screws into wood, plastics or metal, e.g.to fix the reinforcement in PVC profiles.
2. Automatic: Integrated screw feeding system and automatic start of the hopper movement when operating.
3. Flexible Production: Work piece height (screwing level) can vary between 35 and 95 mm above the base plate.
4. Constant screw driving depth for all materials and independent lf the work piece height due to the automatic depth of drive control.
5. Simple Operation: Manual operation by treadle
6. High Efficiency: Screw driving cycle time to insert one self-drillng screw for reinforcement fixing approx.2 seconds.
7. Horizontal clamping device.

ASD-6000
UPVC Window CNC Screwing Drilling Machine
Features:
1. This auto screw driver machine mainly used for inserting screws to mental profile to fix the reinforcement in upvc profile, and drilling installed holes.
2. Inserting and drilling in one machine. The screw spacing and mounting hole position are evenly distributed automatically
3. Machine head is imported from Germany POWERSURT. High reliability.
4. Imported rack and pinion drive, fast speed and high precision.
5. Two separate working areas, each work area can be placed 4 pcs as client requirement, and the discharge is not stopped.
6. Schneider controlling system based on the windows 7 system. It can be linked with ERP software to data sharing and communication.
7. light curtain can be included as client requirement.
8. Fixture will be probably required as client requirement.

AWCL-2
UPVC Window Automatic Welding/Cleaning Production Line(Single Layer)
Whole Machine1. Used for automatically realizing the welding and cleaning of frame or sash, composed of welding unit, transfer unit and corner cleaning unit, etc.2. 2mm seam welding.3. Imported computer control system, with high reliability.4. Production ability between main units matched each other.5. Automatically program and select processing programs.6. Apply to high grade and mass windows production.

FENSTEK F-3
CNC Milling and Cutting Processing Center Integrated with Double Laser Head
Features:
1. CNC laser cutting and milling processing center applied in aluminum industry for higher efficiency and good milling result.
2. Powerful function: 550 single saw blade milling machine: -45°~45° arbitrary angle cutting, 3KW high power + mirror cutting.
3. High-speed dual laser: rear laser cutting and front laser line marking, especially the marking of the connecting point of the mullion.
4. Laser processing: rear laser cutting, the power can be adjusted automatically, good cutting quality. Laser processing can be completed on both sides at the same time, accurate positioning and high efficiency.
5. High-speed 4-side milling: Simultaneous milling of front and back on four sides, higher processing efficiency.

FENSTEK CMC-3-2500 CNC COPY MILLING MACHINE 2500 MM
CMC3-2500 CNC Copy Milling Machine for Aluminum Windows and Doors
1. Advanced industrial CNC 3-axis profile machining systems.
2. Suitable for Aluminum, PVC, and other light metal material processing;
3.The machine completes milling, drilling, grooving and other multi-functional precisely in one time.
4. Worktable with pneumatic positioning -90°/0°/+90° .Optional 45 degree milling function is available.

FENSTEK NLHM-100 Triple Drilling PVC Copy Router
Features:
1. The keyhole drilling system located opposite the operator is easy to operate.
2. Hydropneumatic drive device for feeding the drilling system cylinder to reduce labor intensity.
3. Automatic milling of handle hole, Euro groove and various holes or grooves for processing UPVC window profile.
4. Mechanical turret head with memory for fast positioning.
5. Routing by stops or universal template in a ratio of 1:1.
7. Adjustment wheel for convenient adjustment of the milling height. User-friendly design.
8. Equipped with a standard template for holes. Standard template for special design.
9. Centering stop, manual.

AWSM3
Auto Water Slot Milling Machine (Three Routers)




Feature:1. Water Slot Milling Machine has three independent routing units for automatic routing and drilling of water slots and ventilation hole in PVC profile.2. Adopt advancing Germany technique.3. Sliding and turret clamp buffers allow quick adjustment.4. Auto moving working table ensure nice milling5. Easy adjustment to realize symmetrical milling.6. Optional Mode: TAWSM3 with twin machine head suitable for mass production.

Double-head welding machine YILMAZ DK502, new model. In excellent condition, year of manufacture 2022. Does not require attachments, all basic checks, settings, maintenance have been completed. Teflon film on welding mirrors has been replaced.
The machine is not in serial operation, it is in warehouse storage. Upon request, we can send additional photos and videos, as well as arrange a video call session, live.
We will help with shipment, we will find options for additional loading or send to the transport company. There is a forklift at the base.
The machine is sold with VAT, we will provide a package of documents - a supply agreement, UPD, invoice, operating instructions, TTN for transportation.

FENSTEK CMC-3-3000 QTC CNC COPY MILLING MACHINE 3000 MM
CMC3-3000 QTC CNC Copy Milling Machine for Aluminum Windows and Doors
QUICK-RELEASE DEVICE FOR INSTANT TOOL REPLACEMENT, INCLUDES THREE TOOL HOLDERS.
AUTOMATIC ROLLER FOR TWO PROCESSING ZONES, UNINTERRUPTIBLE POWER SUPPLY, VOLTAGE STABILIZER.
1. Advanced industrial CNC 3-axis profile machining systems.
2. Suitable for Aluminum, PVC, and other light metal material processing;
3.The machine completes milling, drilling, grooving and other multi-functional precisely in one time.
4. Worktable with pneumatic positioning -90°/0°/+90° .Optional 45 degree milling function is available.

FENSTEK CMC-3-3000 QTC CNC COPY MILLING MACHINE 2500 MM
CMC3-3000 CNC Copy Milling Machine for Aluminum Windows and Doors
QUICK-RELEASE DEVICE FOR INSTANT TOOL REPLACEMENT, INCLUDES THREE TOOL HOLDERS.
AUTOMATIC ROLLER FOR TWO PROCESSING ZONES, UNINTERRUPTIBLE POWER SUPPLY, VOLTAGE STABILIZER.
1. Advanced industrial CNC 3-axis profile machining systems.
2. Suitable for Aluminum, PVC, and other light metal material processing;
3.The machine completes milling, drilling, grooving and other multi-functional precisely in one time.
4. Worktable with pneumatic positioning -90°/0°/+90° .Optional 45 degree milling function is available.