USED ​​MACHINES FOR PVC & ALUMINUM (FROM STOCK)

USED KABAN PB2010_2021 YEAR OF PRODUCTION AUTOMATIC MOLDING MACHINE
Automatic machine for milling the end of the molding KABAN PB2010. Year of manufacture 2021. The equipment worked for one season, the condition is new. Can be checked in operation. Warehouse storage. Location - Samara. We will send to TK in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN on the road if necessary

NEW PLASTMAK SC-201_2020 G.V. AUTOMATIC END MILLING MACHINE
NEW MACHINE. Face milling machine for milling imposts, automatic, for processing PVC profiles. Without cooling. Model PLASTMAK SC201. The machine is absolutely new, never used. Warehouse storage in a warm warehouse.
Year of manufacture 2020.
Upon arrival at the warehouse, the machine is connected and checked. Upon request, we can send photos and videos of the work, it is also possible to show the machine via video link or you can come and see in person, we will connect, show the machine in operation.
Sale by bank transfer without VAT, under the contract. We will provide a package of documents - a supply agreement, UPD, an acceptance certificate, a waybill for transportation.

USED_MURAT FA153, 2019. AUTOMATIC MOUTH CUTTERS, TURKEY
Automatic machine for milling the end of the mullion, for one cutter, quick-release, with pneumatic feed, variable angle, pneumatic clamps. Manufacturer MURAT, Turkey. Model FA-153. Year of manufacture 2019. Condition is excellent. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

USED ​​BROGEN OKFM-A, 2012. AUTOMATIC MULLION END MILLING MACHINE, TURKEY
Automatic machine for milling the end of the mullion, for one cutter, with pneumatic feed, variable angle, pneumatic clamps. Manufacturer BROGEN, Turkey. Model OKFM-A. Year of manufacture 2012. The condition is excellent, the machine is almost new. Location - Samara. Shipment - pickup, delivery by a transport company is possible. Semi-automatic machine for processing the end of the mullion with a rotary table Brogen OKM-A

Automatic machine for end milling operation, with a quick-release device. OZCELIK, POLAR-IV. The year of manufacturing is 2022, in perfect condition, with an instruction manual. Used in aluminum production for 1.5 years. Received at the warehouse, connected, checked, no problems noticed.
The machine is ready for shipment from our warehouse. Inspection options for the buyer - 1. Additional photos and videos upon request. 2. Video call  showing the machine in real time. 3. Personal visit to the warehouse, with connection and demonstration of work, including on the buyer's samples.
Sale is possible by bank transfer without VAT (simplified tax system). A full package of documents for shipment is provided - a supply agreement, acceptance certificates, UPD and TTN for transportation. Upon request, we will help with shipment - search for options for transportation as additional cargo, or submit an application for the buyer to pick up the cargo from a transport company (by agreement)

OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.

Screw compressor REMEZA VK10E-500-D, power 7.5 kW, receiver 500 l, capacity 1000 l/min, dryer. Excellent condition, full maintenance with replacement of oil, filters, belts, etc. The operating hours can be seen in the photo in the carousel.
Compressor in stock, warehouse storage. We can demonstrate it by video call, by prior arrangement.
Sale - cashless payment without VAT, we will provide a package of documents - supply agreement, acceptance certificates, consignment notes for transportation. We will help with shipment, there is a forklift at the base.

Screw compressor ABAC GENESIS 1110-500. Year of manufacture 2010. Complete with a dryer and a 500-liter receiver. Capacity 1500 l/min. Good condition, full maintenance and service. The meter readings can be seen in the photo carousel.
You can see the status by video call with the warehouse, just agree on the time in advance.
Sale - cashless without VAT, we will provide a set of documents - a supply agreement, UPD, acceptance certificate, TTN for shipment. We will help with loading onto your transport, or we will help find additional cargo to your city in the Russian Federation.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer YILMAZ, Turkey. Model KP120. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.