USED ​​MACHINES FOR PVC & ALUMINUM (FROM STOCK)

USED ​​OZGENC OMRM-105, 2008. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model OMRM-105, manufacturer OZGENC, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company across the Russian Federation is possible.

Used cleaning machine for PVC profile corners. Model URBAN SV-305, year of manufacture 2005. Made in Germany. Good condition. Tool - conventional cutters, 3 pcs on one shaft, cutters for cleaning grooves for seals, top and bottom, cleaning knives top-bottom for removing the weld.
The equipment is ready for shipment, a fully functional machine, routine repairs, maintenance and adjustments have been carried out. The machine is in warehouse storage at our warehouse in Samara. Upon request, we will provide additional photos and videos.
It is possible to connect and check in the warehouse.

MURAT KC258, 2017
Two-head welding machine with top feed of heating elements;
- The machine welds the outer surface of the profile with a thickness of 0.2 to 0.4 mm;
- This technology allows you to get a thin front seam on a laminated PVC profile, the appearance of which is much more attractive than standard welding;
- The right welding head allows you to weld profiles only at an angle of 90 degrees, the left one - with a variable angle;
- The right welding head moves manually along the guides;
- The working cycle is automatic;
- The electronic system of the machine allows you to set welding modes (adjust the heating and compression time of the workpieces, the compression force of the workpieces) and constantly monitor them;
- The electronic display on the control panel provides information on all working cycles and emergency failures

USED ​​MURAT KB513, 2010 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine MURAT KB513, year of manufacture 2010. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.