USED ​​MACHINES FOR PVC & ALUMINUM (FROM STOCK)

USED ​​URBAN KV2800HF GLAZING UNIT
Glazing and control stand with lifting, manufacturer URBAN, Germany. In good condition. Only compressed air is needed for the equipment to operate. The glazing stand has been tested, it can be demonstrated in operation. Glazing stand without lifting URBAN KV2800HF. Full clamp of the structure at an angle of 90 degrees. The condition is excellent. Only compressed air is needed for the stand to operate.
Location - Samara, warehouse storage. We ship by forklift, side feed, with uncovering.
Shipment - pickup, delivery by a transport company is possible.
Sale - cashless without VAT, we will provide a package of documents - a supply agreement, UPD, acceptance certificates, TTN for the road.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.

Screw compressor ABAC GENESIS 1110-500. Year of manufacture 2010. Complete with a dryer and a 500-liter receiver. Capacity 1500 l/min. Good condition, full maintenance and service. The meter readings can be seen in the photo carousel.
You can see the status by video call with the warehouse, just agree on the time in advance.
Sale - cashless without VAT, we will provide a set of documents - a supply agreement, UPD, acceptance certificate, TTN for shipment. We will help with loading onto your transport, or we will help find additional cargo to your city in the Russian Federation.

USED ​​YILMAZ DKN-300, 2011 YEAR OLD. SEMIAUTOMATIC MEASURING ROLLER CONVEYOR, TURKEY
Measuring roller conveyor, working length 3.0 meters. Model DKN-300, manufacturer YILMAZ, Turkey. Movement of the measuring stop using a flywheel and belt drive. Reading the size by magnetic tape, transmitting information via an encoder to a universal electronic display. The roller conveyor has been replaced with a new main switch. The roller conveyor is in excellent condition.
Location - Samara, warehouse storage. After checking, the roller conveyor is packed in a wooden box for shipment and further transportation. Sale by bank transfer without VAT is possible.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

NEW OZCELIK VEGA-IIA_AUTOMATIC SINGLE-HEAD PENDULUM SAW
Single-head aluminum saw Ozcelik Vega II A 400 with pendulum feed of the saw blade and coolant supply system, which is designed for cutting aluminum profiles and non-ferrous metals. Automatic feed of the saw blade. Cutting safety is ensured by a double spring system and a protective cover.
The cutting angle can be changed within the range from -45° to the right to +45° to the left. The main angles -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° have a clear fixation, other intermediate angles are set according to a graduated scale. The workpiece is fixed on the vega-2 thanks to two vertical and two horizontal pneumatic clamps.
THE PRICE OF THE MACHINE INCLUDES A 3.0 M MEASURING ROLLER UNIT.

OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.

Two-head welding machine ELUMATEC ZS720/LV, in good condition. Fully functional, complete (covers, casings, side supports, lighting, undercoatings, welding mirrors in good condition, with Teflon). Year of manufacture 2007, the machine was adjusted and maintained in our warehouse, we can connect and demonstrate in operation, including via video call or in the personal presence of the client on his profile samples.
We work on a non-cash basis, without VAT. We will help with shipment and sending to the transport company, side loading on your transport. We will provide a full package of documents for the transaction - a supply agreement, UPD, acceptance certificates, consignment notes for shipment.
The machine is not in use, it is in warehouse storage in a warm warehouse. Location - Samara. Upon request, we can send WhatsApp photos and videos of the machine in operation.

Double-head welding machine YILMAZ DK502, new model. In excellent condition, year of manufacture 2022. Does not require attachments, all basic checks, settings, maintenance have been completed. Teflon film on welding mirrors has been replaced.
The machine is not in serial operation, it is in warehouse storage. Upon request, we can send additional photos and videos, as well as arrange a video call session, live.
We will help with shipment, we will find options for additional loading or send to the transport company. There is a forklift at the base.
The machine is sold with VAT, we will provide a package of documents - a supply agreement, UPD, invoice, operating instructions, TTN for transportation.

KABAN BB2030. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2012. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.

USED ​​YILMAZ CK 410, 2008. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model CK410, manufacturer Yilmaz, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.

Double-head automatic front saw FIMTEC SD25/S4. Designed for cutting two PVC or aluminum profiles at the same time. Saw blades 500 mm, in good condition. The cut length of workpieces at 90 and 45 degrees corresponds to the standard, no errors or backlashes are observed. Cutting at an angle is also within the standard, the angles after cutting match the specified parameters.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.

Semi-automatic frontal double-head saw, complete with a stationary roller table for feeding the profile on the left. Model KABAN AB1030. 2021 year of manufacture. Condition of new equipment. Can be checked in operation, we will provide photos and videos upon request. Warehouse storage. Location - Samara. We will send to the transport company in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN for the road if necessary

USED ​​YILMAZ DC421MS_2012 TWO-HEAD FRONT SAW SEMIAUTOMATIC
Two-head front saw, semiautomatic. YILMAZ DC420MS, 2011. The equipment is in excellent condition. The saw has been completely repaired. New screens have been installed on the protective covers, the specified angles and cutting length are normal, the saw blades are in order, the bearings and belts have been replaced, an extension for maximum cuts is available, a new cooling system has been installed, the electronic size indicator works without errors. Absolutely everything has been done on the machine, no additional actions are required for normal operation.
The equipment can be viewed in operation, tested in our warehouse. Sale is possible under a contract, non-cash payment without VAT. We will provide the entire set of documents - supply agreement, UPD, acceptance certificate, TTN. The saw is ready for shipment, we will provide loading onto your transport.
Location: Samara, warehouse storage.

KABAN MA2010. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2014. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.

NEW YILMAZ CA-603, 2013. MACHINE FOR CLEANING CORNERS WITH FOUR CUTTERS, TURKEY
NEW Machine for automatic cleaning of corners, with 4 groups of cutters. WITHOUT a supporting brush folding table, only "legs" are included. Manufacturer YILMAZ, Turkey, model CA-603. Year of manufacture - 2013. The machine has never been used, was in a warehouse, stored in the factory packaging. Currently, it is fully tested and configured, it can be connected and shown in operation both during the customer's personal visit to our warehouse, and via a WhatsApp video call.
Upon request, we will send photos and videos of the work.
Location - Samara. Shipment - pickup, delivery by a transport company across the Russian Federation is possible.

Used cleaning machine for PVC profile corners. Model URBAN SV-305, year of manufacture 2005. Made in Germany. Good condition. Tool - conventional cutters, 3 pcs on one shaft, cutters for cleaning grooves for seals, top and bottom, cleaning knives top-bottom for removing the weld.
The equipment is ready for shipment, a fully functional machine, routine repairs, maintenance and adjustments have been carried out. The machine is in warehouse storage at our warehouse in Samara. Upon request, we will provide additional photos and videos.
It is possible to connect and check in the warehouse.

Single-head saw with bottom feed. Saw blade 500 mm. Designed for cutting PVC and aluminum at different angles. Manufacturer PERTICI, Italy. Model UNIVER 50. Year 2007. In excellent condition. Included with the kit we give a long feed roller table, 6.5 m, as well as a measuring roller table with a stop of 3.0 meters. Both roller tables QuotaBase, Italy.
The machine is connected, checked, adjusted. Upon request, we will provide a video of the work. It is also possible to connect and show the work of the machine via video call or during a personal visit on the customer's samples
The machine is in warehouse storage, location Samara.
Sale by bank transfer without VAT. We will provide a package of documents - a supply agreement, UPD, acceptance certificates, TTN for transportation.
CHARACTERISTICS
Single-head saw with automatic disc lift Head rotation 22.5-90-157.5º Included: Ø500 mm disc, horizontal (2) and vertical (2) pneumatic clamps, cooling system, blow gun, frame, 380 V, 4 kW

NEW KABAN PB2010 AUTOMATIC MILLING MACHINE
Automatic machine for milling the end of the molding KABAN PB2010. The equipment worked for one season, the condition is new. Can be checked in operation. Warehouse storage. Location - Samara. We will send to TK in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN on the road if necessary