USED ​​MACHINES FOR PVC & ALUMINUM (FROM STOCK)

USED ​​OZGENC OMRM-105, 2008. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model OMRM-105, manufacturer OZGENC, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company across the Russian Federation is possible.

USED ​​PROFTEQ TR65N, 2007. GLAZING BEAD CUTTING SAW, ITALY
Glazing bead cutter with automatic saw blade feed, model TR65N, manufacturer PROFTEQ, Italy. Year of manufacture 2007, in excellent condition. Without roller conveyor. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.

OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.

NEW TATPROF SOKOL MP-640 BS-13600 MANUAL PRESS FOR PROCESSING THE SLIDING SYSTEM C-640
Manual Press BISAL BS 13600 (article of the press manufacturer, Serbia). According to the Tatprof catalog, it has the article number SK.09.465.007.000 for processing Tatprof profiles of the EK-640 system (recently sold under the Sokol MP-640 brand). Designed for processing the PROVEDAL C-640 sliding system, does not require connection to electricity and pneumatics. An ideal option for small production, suitable for use immediately at the construction site. Sold without a frame, in a portable version.

USED ​​URBAN KV2800HF GLAZING UNIT
Glazing and control stand with lifting, manufacturer URBAN, Germany. In good condition. Only compressed air is needed for the equipment to operate. The glazing stand has been tested, it can be demonstrated in operation. Glazing stand without lifting URBAN KV2800HF. Full clamp of the structure at an angle of 90 degrees. The condition is excellent. Only compressed air is needed for the stand to operate.
Location - Samara, warehouse storage. We ship by forklift, side feed, with uncovering.
Shipment - pickup, delivery by a transport company is possible.
Sale - cashless without VAT, we will provide a package of documents - a supply agreement, UPD, acceptance certificates, TTN for the road.

USED ​​YILMAZ DKN-300, 2011 YEAR OLD. SEMIAUTOMATIC MEASURING ROLLER CONVEYOR, TURKEY
Measuring roller conveyor, working length 3.0 meters. Model DKN-300, manufacturer YILMAZ, Turkey. Movement of the measuring stop using a flywheel and belt drive. Reading the size by magnetic tape, transmitting information via an encoder to a universal electronic display. The roller conveyor has been replaced with a new main switch. The roller conveyor is in excellent condition.
Location - Samara, warehouse storage. After checking, the roller conveyor is packed in a wooden box for shipment and further transportation. Sale by bank transfer without VAT is possible.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

NEW PLASTMAK SC401, 2020 YEAR OF PRODUCTION. SINGLE-HEAD SAW WITH BOTTOM FEED, TURKEY
NEW Single-head saw with bottom feed, for cutting PVC profiles. Disc 420 mm, vertical pneumatic clamps. Roller conveyor included. Manufacturer PLASTMAK, Turkey. Model SC401. Year of manufacture - 2020, good condition. Warehouse storage, it is possible to connect and check the functionality.
Location - Samara. Shipment - pick-up, delivery by a transport company in the Russian Federation is possible.

Double-head welding machine YILMAZ DK502. In excellent condition, year of manufacture 2014. Does not require attachments, all basic checks, settings, maintenance have been completed. Teflon film on welding mirrors has been replaced.
The machine is not in serial operation, it is in warehouse storage. Upon request, we can send additional photos and videos, as well as arrange a video call session, live.
We will help with shipment, we will find options for additional loading or send to the transport company. There is a forklift at the base.
The machine is sold with VAT, we will provide a package of documents - a supply agreement, UPD, invoice, operating instructions, TTN for transportation.

NEW OZCELIK ORCA 2014 AUTOMATIC GLAZING BEAD CUTTER
NEW automatic glazing bead cutter OZCELIK ORCA. Made in Turkey. Year of manufacture 2014. The equipment is new, never used, stored in the original packaging from the moment of purchase. Upon arrival at the warehouse, the machine is unpacked, connected, checked for operability. The glazing bead cutter is equipped with a new "native" measuring roller table. Warehouse storage, the equipment is ready for sale. It can be connected and checked, upon request we will send WhatsApp photos and videos of the work. Sale by bank transfer, without VAT. We will provide a package of documents - instructions, supply agreement, UPD, acceptance certificate, TTN for transportation. Sending to TC is possible upon agreement.

USED ​​YILMAZ FR226_2012 YEAR OLD COPY-MILLING MACHINE, TURKEY
Automatic copy-milling machine YILMAZ FR-226, for milling a triple hole for handles, as well as a groove for a lock. Year of manufacture 2012, the machine is in excellent condition. Currently in warehouse storage. Location - Samara. We can send photos and videos WhatsApp, and also demonstrate the work in person if the client comes to the warehouse. We will help with shipment, pack the equipment in stretch film, we can hand it over to the TC. We sell by bank transfer without VAT, contract, acts pp, UPD and TTN.

USED ​​YILMAZ KM213, 2012 YEAR. AUTOMATIC MILLING MACHINE, TURKEY
Automatic machine for milling the end of the molding, for one cutter, WITHOUT quick release, with pneumatic feed, variable angle, pneumatic clamps. Additionally, you can install a cooling system for working with aluminum. Manufacturer YILMAZ, Turkey. Model KM-213. Year of manufacture 2012. Condition is excellent. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.

Used Aluminum Copy-Milling Machine
Model LXF-235x100, China.
Year of manufacture: 2025. Condition: New. Manual cutter feed, coolant system installed. The machine is designed for milling holes in aluminum profiles.
The equipment is new; it has been in operation for approximately six months. The production project was closed and the machine was decommissioned in November 2025.
The machine is in stock. Location: Samara. Installation and demonstration are available. We can also assist with shipping; a forklift is available.
Sale includes VAT. A full set of documents (supply contract, acceptance certificates, and UPD) is provided.

Used LMD-120 Hydraulic Corner Crimping Machine, China.
Manufactured in 2025. Equipment in new condition. Hydraulic knife feed, crimping height up to 120 mm. Designed for joining aluminum profile corners.
The equipment is new; it has been in operation for approximately six months. The production project was closed and the equipment was decommissioned in November 2025.
Machine in stock. Located in Samara. Installation and demonstration are available. We can also assist with shipping; a forklift is available.
Sale includes VAT. A full set of documents (supply contract, acceptance certificates, and UPD) is provided.

Used RYJ-600 Single-Head Front Saw, China.
Year of manufacture: 2025. New condition. Automatic blade feed from below, coolant system installed. The machine is designed for cutting aluminum profiles; PVC profiles can also be cut. 600 mm diameter saw blade. Electronic angle indicator. Mechanical roller tables (feed and measuring).
The equipment is new; the saw has been in use for about six months. The production project was closed and the equipment was decommissioned in November 2025.
The machine is in stock. Location: Samara. Installation and demonstration are available. We can also assist with shipping; a forklift is available.
Sale includes VAT. A full set of documents (supply contract, acceptance certificates, and UPD) is provided.

Used DX06-220 Automatic Transom Milling Machine, China.
Manufactured in 2025. New condition. Automatic blade feed and coolant system installed. The machine is designed for milling aluminum transoms and mullions. It can process multiple workpieces in a single cycle.
The equipment is new; the machine has been in operation for approximately six months. The production project was closed and the machine was decommissioned in November 2025.
The machine is in stock. It is located in Samara. Installation and demonstration are available. We can also assist with shipping; a forklift is available.
Sale includes VAT. A full set of documents (supply contract, acceptance certificates, and UPD) is provided.

Single-head welding machine YILMAZ TK501. Standard edition. The machine is in excellent condition, a new temperature controller is installed. The machine is fully assembled, warehouse storage.
Location: Samara. Shipment - pickup, can be sent to a transport company or as additional cargo
Upon request, we will provide additional photos and videos of the work. A video call with the warehouse in real time is possible. You can also come personally to our warehouse, bring your samples and test the machine in operation on samples. We will connect, demonstrate the work.
The sale of the machine is carried out by bank transfer without VAT, we will provide instructions in electronic form. A package of documents - a supply agreement, an acceptance certificate, UPD, TTN for transportation.

USED ​​KABAN BA2030, 2020 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine KABAN BA2030, year of manufacture 2020. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

Used cleaning machine for PVC profile corners. Model URBAN SV-305, year of manufacture 2005. Made in Germany. Good condition. Tool - conventional cutters, 3 pcs on one shaft, cutters for cleaning grooves for seals, top and bottom, cleaning knives top-bottom for removing the weld.
The equipment is ready for shipment, a fully functional machine, routine repairs, maintenance and adjustments have been carried out. The machine is in warehouse storage at our warehouse in Samara. Upon request, we will provide additional photos and videos.
It is possible to connect and check in the warehouse.