FENSTEK & SINON, CHINA (UPVC & ALUM MACHINES)

Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours

Thermal Break Assembly Machine

Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of knurling machine with strip feeder device
1 set of rolling machine
Daily capacity is 5~6 Tons per 10 hours

SINGLE-HEAD FRONT SAW SINON SSJ06-450
Single-head front saw for cutting aluminum and PVC profiles -45, 90, +45 degrees.
450 mm saw blade ● Suitable for cutting PVC and aluminum profiles. ● Angle range: 45°, 90°, 135°, the angle of rotation is adjusted manually. ● The saw blade rotates smoothly thanks to the high-precision main spindle box, ensuring stable operation with high precision

SINGLE-HEAD BOTTOM FEED SAW
LJZ2F-500 Single-head bottom feed saw for cutting aluminum at various angles. 500mm saw blade. Cutting range 25-155 degrees
MAIN FEATURES
Suitable for door and window profiles, LED lamp frame profiles, curtain wall profiles, etc. Cutting aluminum and PVC profiles. Cutting angle: 25 ° - 155 ° Equipped with a saw blade with a diameter of 500 mm. Equipped with a 3.5m long calibration table and a 4m high profile table. Equipped with a cutting protective screen that automatically lowers when cutting to prevent metal chips from splashing. Horizontal and vertical clamping devices, stable cutting. High precision, high cutting stability, good appearance of the whole machine

SINGLE-HEAD SAW WITH BOTTOM FEED SINON LJZ2F-600, 600 MM DISC
JZ2F-600 Automatic single-head saw with bottom feed. Cutting aluminum door and window profiles at an angle of 15-165 degrees. Saw blade diameter 600 mm
Features
1. This automatic single head aluminum profile cutting machine mainly used for cutting aluminum and PVC profiles, with bottom-up saw blade feeding type.
2. This machine is suitable for cutting industrial aluminum and facade profiles, aluminum doors and windows.
3. Equipped with feeding and measuring roller table.
4. The working table is adjustable to increase the cutting area.

SINON SJ02-350 SINGLE-HEAD PENDULUM SAW
Automatic single-head pendulum saw for cutting PVC profiles (350mm) Saw blade Φ350mm×φ30mm. Cutting width: Max 200mm Cutting height: Max 100mm. Cutting angle: 45/90/135