FENSTEK & SINON, CHINA (UPVC & ALUM MACHINES)

Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours

Thermal Break Assembly Machine

Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of knurling machine with strip feeder device
1 set of rolling machine
Daily capacity is 5~6 Tons per 10 hours

LJK-600
Aluminum Window Notching Saw
Description:
1. This aluminum saw is specially designed for processing aluminum curtain walls and skylights with a special angle on the end surface of the profile.
2. With a magnetic grid control system, realized cutting angle and digital display of the working table height.
3. Two saws are freely changed to +45º～-45º
4. The movement of the saw units is carried out on a servo drive, the cutting angles are set manually, using a special key. The current cutting angle is transmitted to the electronic display for each saw unit separately

ALUMINUM CUTTING SAW SINON LJKJ-500. 500 MM BLADES. SERVO DRIVE
LJKJ-500 Automatic cutting saw for facade profiles Application: this machine is used for processing aluminum facade profiles. The movement of the sawing units is automatic, along the work table with a fixed workpiece. The setting of the cutting angle on each sawing unit is carried out manually, using a special key, on a worm gear. The indicators of the set angles are displayed on two electronic displays.