Active filters

  • Brand: KABAN, Турция clear
  • Brand: OZGENC, Турция clear
  • Brand: PROFTEQ, Италия clear
  • Brand: Бежецк, Россия clear
NEW KABAN PB2010 Automatic Milling Machine
NEW KABAN PB2010 AUTOMATIC MILLING MACHINE
Automatic machine for milling the end of the molding KABAN PB2010. The equipment worked for one season, the condition is new. Can be checked in operation. Warehouse storage. Location - Samara. We will send to TK in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN on the road if necessary
$5,600.00
USED KABAN BA2030, 2006 Single Head Welding Machine
USED ​​KABAN BA2030, 2020 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine KABAN BA2030, year of manufacture 2020. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.
$1,850.00
KABAN BB2030, 2021.Twin Head Welding Machine
KABAN BB2030. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2012. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.
$8,500.00
OZGENC OMRM111 Manual Milling Machine, 2005
OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.
$950.00
KABAN MA2010, 2014 г.в. Twin Head Welding Machine
KABAN MA2010. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2014. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.
$11,550.00
KABAN AB1030, 2021 Double Head Mitre Saw
Semi-automatic frontal double-head saw, complete with a stationary roller table for feeding the profile on the left. Model KABAN AB1030. 2021 year of manufacture. Condition of new equipment. Can be checked in operation, we will provide photos and videos upon request. Warehouse storage. Location - Samara. We will send to the transport company in the Russian Federation. Can be purchased by bank transfer without VAT. We will provide a full package of documents - UPD, supply agreement, acceptance certificate, TTN for the road if necessary
$11,300.00
USED COMPRESSOR BEZHETSK KV-30
USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$3,300.00
USED COMPRESSOR BEZHETSK KV-30
USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.
$2,900.00
USED KABAN DD4070, 2007 Water Slot Milling Machine
USED ​​KABAN DD4070, 2007 YEAR OF PRODUCTION. AUTOMATIC MACHINE FOR DRAINAGE, TURKEY
Automatic three-spindle milling machine for drainage model DD4070, manufacturer KABAN, Turkey. Year of manufacture 2007. Condition is excellent. Equipped with three asynchronous motors for drainage channels. The machine is fully equipped, tested in operation. Location - Samara. Shipment - pickup, delivery by a transport company is possible.
$1,900.00
USED PROFTEQ TR65N, 2007 Glass Bead Saw automatic
USED ​​PROFTEQ TR65N, 2007. GLAZING BEAD CUTTING SAW, ITALY
Glazing bead cutter with automatic saw blade feed, model TR65N, manufacturer PROFTEQ, Italy. Year of manufacture 2007, in excellent condition. Without roller conveyor. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.
$950.00
USED OZGENC OMRM-105, 2008 Glass Bead Saw automatic
USED ​​OZGENC OMRM-105, 2008. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model OMRM-105, manufacturer OZGENC, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company across the Russian Federation is possible.
$1,000.00
New
USED COMPRESSOR FIAC AB-850, 2015
USED ​​COMPRESSOR FIAC AB-850 PISTON COMPRESSOR
Piston compressor FIAC, model AB-850 for 850 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$1,800.00
New
USED COMPRESSOR REMEZA СБ4-Ф/75Lt, 2012
USED ​​COMPRESSOR REMEZA СБ4-Ф/75Lt PISTON COMPRESSOR
Piston compressor REMEZA СБ4-Ф/75Lt for 880 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.
$1,700.00