Главная

USED ​​PERTICI UNIVER-500, 2004 YEAR OF PRODUCTION. DOUBLE-HEAD FRONT SAW, ITALY
Two-head SEMI-automatic front saw PERTICI UNIVER-500, 500 mm discs, 4.0 meter cut, manual positioning of the movable head, pneumatic setting of the required angles of 90-45 degrees, a cooling system is installed. The machine has been completely restored, bearings have been replaced, direct drive, without belts. Two saw blades are installed on the machine, one is in good condition after sharpening, the second disc is new. Year of manufacture 2004. The machine is in excellent working condition, checked, adjusted. Warehouse storage, can be shown in operation. Location - Samara. Shipment - pickup, we can send by a transport company.

Double-head automatic front saw FIMTEC SD25/S4. Designed for cutting two PVC or aluminum profiles at the same time. Saw blades 500 mm, in good condition. The cut length of workpieces at 90 and 45 degrees corresponds to the standard, no errors or backlashes are observed. Cutting at an angle is also within the standard, the angles after cutting match the specified parameters.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.

NEW PLASTMAK SC401, 2020 YEAR OF PRODUCTION. SINGLE-HEAD SAW WITH BOTTOM FEED, TURKEY
NEW Single-head saw with bottom feed, for cutting PVC profiles. Disc 420 mm, vertical pneumatic clamps. Roller conveyor included. Manufacturer PLASTMAK, Turkey. Model SC401. Year of manufacture - 2020, good condition. Warehouse storage, it is possible to connect and check the functionality.
Location - Samara. Shipment - pick-up, delivery by a transport company in the Russian Federation is possible.

PLASTMAK, used single-head saw with front disc feed, diameter 400 mm. Automatic blade feed, angle in the fixed range of 45-90-45 degrees. The cutting machine is designed for cutting aluminum and PVC profiles, especially for cutting small-section profiles, including aluminum glazing beads, 90-degree cut. The machine is in good working condition. No backlashes or errors were noted during testing, both when measuring the length and when measuring the cut angles.
Cashless sale without VAT, simplified tax system. We will provide a package of documents for delivery - a supply agreement, UPD, acceptance certificates, TTN on the road. It is possible to send by a transport company, or as additional cargo.

NEW PLASTMAK SC301 2020 AUTOMATIC GLAZING BEAD CUTTER
NEW automatic PLASTMAK SC301 glazing bead cutter. Made in Turkey. Year of manufacture 2020. The equipment is new, never used, stored in the original packaging from the moment of purchase. Upon arrival at the warehouse, the machine is unpacked, connected, checked for operability. The glazing bead cutter is equipped with a new "native" measuring roller table. Warehouse storage, the equipment is ready for sale. You can connect and check, upon request we will send WhatsApp photos and videos of the work. Sale by bank transfer, without VAT. We will provide a package of documents - instructions, supply agreement, UPD, acceptance certificate, TTN for transportation. Sending to TC is possible upon agreement.

NEW PLASTMAK SC-201_2020 G.V. AUTOMATIC END MILLING MACHINE
NEW MACHINE. Face milling machine for milling imposts, automatic, for processing PVC profiles. Without cooling. Model PLASTMAK SC201. The machine is absolutely new, never used. Warehouse storage in a warm warehouse.
Year of manufacture 2020.
Upon arrival at the warehouse, the machine is connected and checked. Upon request, we can send photos and videos of the work, it is also possible to show the machine via video link or you can come and see in person, we will connect, show the machine in operation.
Sale by bank transfer without VAT, under the contract. We will provide a package of documents - a supply agreement, UPD, an acceptance certificate, a waybill for transportation.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

Sapphire C150 Aluminum Window Cutting Center
Features:
1. This CNC aluminium cutting center is used for auto cutting of 45°and 90°cutting of aluminium profile, U-PVC profile.
2. High efficiency production. Finish one cutting within 12 seconds.
3. Feeding-in manipulator controlled by 4 servo motors, can identify kinds of profile to positioned automatically, no need design special jig.
4. Can auto feeding 9 profiles at one time. High production efficiency. 3-4 times higher than CNC Double head cutting saw.
5. Separate Schneider servo motors controlled cutting movement up to down to assurethe high precision and high-volume production.
6. Automatically servo-controlled feeding-out system.
7. One person operates whole cutting center, saving in labor.
8. Cast machinery basement assure stable running.

STORM UPVC Window Profile Cutting Center
Features:
1. UPVC Window Profile Cutting Center is used for auto cutting of the 45°, V-notch and mullion cutting of upvc profile. Suitable for massive production.
2. Download the profile cutting data automatically, without manual input or adjustment.
3. Complete the profile clamping, feeding, cutting automatically. High degree of automation.
4. The machine hand can clamp 8 profiles at one time and finish the cutting of them. High production efficiency.
5. High-speed main shaft cutting. High quality cutting.
6. Linear motion guide. High precision cutting.
7. Three-axis CNC controlling. High degree automation.
8. Imported driving system, close-loop control, high machining precision.

Emerald T140
Aluminium Window & Door Three Axis Machining Center
Features:
1. Aluminum Curtain Wall Machine Emerald T140 is advanced 3-axis machining center.
2. Suitable for aluminium profile and upvc window profile processing.
3. The machine completes milling, drilling, tapping, chamfering, grooving, steel drilling and other multi-functional precisely in one time.
4. Worktable will be positioned at 0°, +90°and -90°drove by pneumatic cylinder
5. Auto lift up safety cover assure operator safety.
6. Automatic tool change: standard equipped with hidden 6-position tool magazine, standard equipped with 3 tool holders.
7. Operation in Window environment Industrial PC with 19’’ colormonitor. Friendly machine interface with user-friendly operation.
8. Online with ERP software, can realize scanning code and automatic processing.

Emerald T140L
Aluminum Window CNC Laser Machining Center
Features:
1.Advanced cnc machining center with servo turning table and 4 servo clamps.
2. Suitable for aluminum profile (up to 3mm thickness) and steel profiles (up to 2mm thickness) processing with super fast speed (5m/min) and efficiency thanks laser technology. High pressure air compressor (1.6Mpa) and cooling station are included.
3. The machine completes milling, drilling, chamfering, grooving, and other multi-functional precisely in one time.
4. Worktable will be positioned from +90° to -90° variable angle.
5. Auto lift up safety cover assures operator safety.
6. Automatic tool change: standard equipped with hidden 6-position tool magazine, standard equipped with 3 tool holders.
7. Operation in Windows environment Industrial PC with monitor. Friendly machine interface with user-friendly operation.

Emerald F260
Aluminium Facade Four-axis Machining Center
Features:
1. Aluminum Facade Machining Center Emerald F260 is advanced industrial CNC 4-axis profile machining systems.
2. Suitable for aluminum profile and other light alloys, as well as UPVC profile processing.
3. The milling head can drill within a range of 90 ° ~0 ° ~-90 ° with according tools at any position.
4. The machine completes milling, drilling, flexible tapping, grooving, steel drilling(within 3 mm) and other multi-functional precisely in one time, the profile was conveyed by the precise stationary avoid profile damage.
5. Adopts imported high precision linear guide ways, ball screws, gear racks and servo motor, ensuring smooth motion, positioning and processing in high precision.
6. High-quality imported automatic tool change based on automatic travel magazine, minimum the tool change time and rotation noise, maximum stability, precision, and cutting ability.

Emerald F550
Aluminium Facade Five-axis Machining Center
Features:
1. Aluminium Door And Window Making Machine Emerald F550 is 5 Axis profile machining center.
2. Five Axis Machining Center Emerald F550 can be used for processing aluminium, steel and upvc profiles.
3. Online with ERP software, can realize scanning code and automatic processing.
4. When the profile is clamped at one time, it can complete all the sawing, milling, drilling, tapping, thread drilling and notching at angle in all surfaces except bottom side. Avoid profile surface scratches and damages.
5. Adopts moving beam and moving column gantry frame structure, the movement is more stable, improves the machining rigidity of machine.
6. Adopts imported high-end CNC control system, Germany's Siemens or Italian OSAI.

FENSTEK CMC-3-2500 CNC COPY MILLING MACHINE 2500 MM
CMC3-2500 CNC Copy Milling Machine for Aluminum Windows and Doors
1. Advanced industrial CNC 3-axis profile machining systems.
2. Suitable for Aluminum, PVC, and other light metal material processing;
3.The machine completes milling, drilling, grooving and other multi-functional precisely in one time.
4. Worktable with pneumatic positioning -90°/0°/+90° .Optional 45 degree milling function is available.

FENSTEK CMC-4-1200 CNC COPY MILLING MACHINE 1200 MM, SERVO DRIVE
CMC4-1200 CNC Copy-Milling Machine for Aluminum Windows Features:
1. Advanced profile processing system 3+1 processing axis
2. Processing range 120 x 120 mm 3. Tool travel length along guides – 1200 mm
3. Possibility to increase maximum length to 2500 mm on CMC4-2500 model
4. Work table with servo positioning -90 ° / 0 ° / + 90 ° / 45 ° or the ability to set non-standard angles upon request. 

CMC3-1200 Aluminum Window CNC Copy Routing Machine
Features:
1. Advanced industrial CNC 3-axis profile machining systems.
2. Suitable for Aluminum, PVC, and other light metal material processing;
3.The machine completes milling, drilling, grooving and other multi-functional precisely in one time.
4. Worktable with pneumatic positioning -90°/0°/+90° .Optional 45 degree milling function is available.
5. Adopts high precision ball screws to ensure smooth motion, positioning and processing in high precision.
6. The operating platform of the system: Linux platform.English, Chinese, Thai, Korean and Vietnamese language are available.
7. The latest version of the system: 4-core 4G memory, fast & smooth operation.
8. Additional one meter Support table for special long profile processing.
9.400mm height safety cover for safety operation.

QUATTRO
UPVC Window Automatic Welding/Cleaning Production Line (double layer)
Features:
1. UPVC Window Automatic Welding/Cleaning Production Line (double layer) used for automatically realizing the welding and cleaning of frame or sash, composed of welding unit, transfer unit, manipulator and corner cleaning unit, etc.
2. Welding double layers for 2 unit one time.
3. The cleaning has 4 heads, automatic transfer the window and cleaning 2 corner one time.
4. Imported computer control system, with high reliability.
5 Production ability between main units matched each other.
6 Automatically program and select processing programs.
7. Apply to high grade and mass window production.
8. Seamless and non-seamless function both.
9. Automatic welding and delivery to cleaning, auto cleaning and auto feed out.

QUATTRO-A
UPVC Window Automatic Welding/Cleaning Production Line(Single Layer)
Whole Machine1. Used for automatically realizing the welding and cleaning of frame or sash, composed of welding unit, transfer unit and corner cleaning unit, etc.2. 0.2mm & 2mm welding auto change through switcher.3. Imported computer control system, with high reliability.4. Production ability between main units matched each other.5. Automatically program and select processing programs.6. Apply to high grade and mass windows production.

PVC FENSTEK IADS500*5000 TWO-HEAD CNC SAW FOR CUTTING 4-6 PVC PROFILES IN ONE CYCLE
SUPPLY ON ORDER!!!
IADS500X5000 Automatic Double-Head Saw for Cutting PVC Profiles with Bottom Feed. CNC Saw for Cutting 4-6 Profiles at a Time. It is possible to retrofit the saw with an industrial computer and label printer option.
Characteristics:
1. The machine is specially designed for cutting PVC window profiles in large volumes.
2. Four or six parts can be cut at a time, depending on the profile width.
3. Automatic change inside 45 and 90 degrees. Different degrees are not available.
4. The saw blade is fed stably and accurately from the inside to the outside using a pneumatic cylinder. An additional hydropneumatic feed cylinder is available.

PVC FENSTEK DS500*5000 TWO-HEAD SEMI-AUTOMATIC SAW. CUTTING 4-6 PVC PROFILES SIMULTANEOUSLY
DS500x5000 Double-head saw for cutting PVC windows, semi-automatic, bottom feed of 500 mm discs, digital indicator of cutting size.
Features:
1. Automatic double-head sawing machine, specially designed for cutting PVC window profiles in large volumes.
2. Four or six blanks can be cut at a time, depending on the profile width.
3. Automatic change within 45 and 90 degrees. Other angles are not available. Saw blade feed from below, disc diameter 500 mm.
4. Direct feed of the saw blade from the inside to the outside stably and accurately using a pneumatic cylinder. An additional hydropneumatic feed cylinder is available.