Главная

USED ​​PERTICI UNIVER-500, 2004 YEAR OF PRODUCTION. DOUBLE-HEAD FRONT SAW, ITALY
Two-head SEMI-automatic front saw PERTICI UNIVER-500, 500 mm discs, 4.0 meter cut, manual positioning of the movable head, pneumatic setting of the required angles of 90-45 degrees, a cooling system is installed. The machine has been completely restored, bearings have been replaced, direct drive, without belts. Two saw blades are installed on the machine, one is in good condition after sharpening, the second disc is new. Year of manufacture 2004. The machine is in excellent working condition, checked, adjusted. Warehouse storage, can be shown in operation. Location - Samara. Shipment - pickup, we can send by a transport company.

Double-head automatic front saw FIMTEC SD25/S4. Designed for cutting two PVC or aluminum profiles at the same time. Saw blades 500 mm, in good condition. The cut length of workpieces at 90 and 45 degrees corresponds to the standard, no errors or backlashes are observed. Cutting at an angle is also within the standard, the angles after cutting match the specified parameters.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.

USED ​​OZGENC OMRM-105, 2008. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model OMRM-105, manufacturer OZGENC, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company across the Russian Federation is possible.

OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.