Главная

USED ​​MURAT KB513, 2010 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine MURAT KB513, year of manufacture 2010. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.

MURAT KC258, 2017
Two-head welding machine with top feed of heating elements;
- The machine welds the outer surface of the profile with a thickness of 0.2 to 0.4 mm;
- This technology allows you to get a thin front seam on a laminated PVC profile, the appearance of which is much more attractive than standard welding;
- The right welding head allows you to weld profiles only at an angle of 90 degrees, the left one - with a variable angle;
- The right welding head moves manually along the guides;
- The working cycle is automatic;
- The electronic system of the machine allows you to set welding modes (adjust the heating and compression time of the workpieces, the compression force of the workpieces) and constantly monitor them;
- The electronic display on the control panel provides information on all working cycles and emergency failures

MURAT KT-804 HARDWARE ASSEMBLY STATION
 
The MURAT KT-804 assembly table enables high-quality assembly of window and door sash opening systems on-the-fly. The KT-804 assembly table allows for the installation of both simple (tilt and turn) and complex (tilt-and-turn) sash opening systems.
 
Speed ​​up work by performing multiple processes on a single table.
Triple drilling of handle holes.
And milling of bolt holes with easy tool positioning.
Cutting unit for simple and tilt-and-turn sash opening mechanisms and hinges without measuring.
Height-adjustable automatic screwdriver for bolts and hinges.
Drilling of hinge holes on-site without measuring.
Ergonomic work thanks to a 15° tilting work table.
Standard equipment shelves for equipment and tools.

MURAT-HAFFNER. SAWING AND PROCESSING CENTER.
Model NR-242
The sawing and processing center is equipped with an automatic cutting module and two processing modules (frame and sash). The capacity is 200-240 pieces per shift.
This center's concept involves first cutting long profiles according to the shift assignment, then transferring frames and sashes cut at 45 degrees, as well as mullions cut at 90 degrees, to the processing module. Before this, the operator inserts reinforcement into the PVC, as further processing is performed on metal. The center is equipped with triple drilling options, a drill for mullion holes in metal, and an automatic dual-head screwdriver for screwing PVC and reinforcement.

KD658/20 4-Head Horizontal Welding Machine, 2019
Includes CK187 Cooling Station.
Manufacturer: Murat-Haffner, Turkey
We can arrange and provide commissioning for an additional fee.
We provide individual cost and commissioning estimates. We provide dismantling, delivery, installation, commissioning, and training. We provide a full range of services through our in-house service department.
Price includes VAT; quote available upon request.
Price below market for sale in December 2025.
We operate under a formal supply contract.
Videos and photos can also be sent via WhatsApp.
The equipment is almost new and in excellent condition.

LJBZ2540 Automatic Vertical Insulating Glass Assembly Line
Features
• Siemens PLC control system (Germany), touchscreen interface
• Automatic detection of coated and low-e glass
• 3 pairs of soft brushes for online and offline washing of low-e glass
• The washing machine uses stainless steel and is waterproof
• Air heating system
• Automatic fan start and stop
• Noise reduction system
• Online washing speed display
• Intelligent intermittent operation mode, energy saving
• Adjustable pressure plate to maintain a flat pressure surface
• Automatic gas filling: gas concentration can be set and the filling process is displayed online at high gas concentrations
• Connection via aviation plug
• Designed for the production of single-chamber, double-chamber, and structural (stepped) glass double-glazed windows

Vertical Insulating Glass Sealing Robot
Model LJTJ2540
Main Features:
• Japanese Yaskawa servo control system, 8 axes, 7 sets of servo drives, fully automatic and highly efficient sealing machine
• 4 sections, glass storage option
• Toothed belt drive, smooth transmission and precise positioning
• Automatic glass corner sealing with a scraper and roller
• Automatic glass size and adhesive depth measurement
• All automatic functions are manually controlled
• Capable of coating double/triple glazing
• One booster pump set controls two sealant groups (optional)
• Suitable for silicone, polysulfide, and silicone structural sealants
• Can be connected to an insulating glass processing line

LJTB01 Butyl Extruder
Key Features:
Butyl extrusion speed can reach 47 m/min.
• Butyl savings compared to conventional equipment: adhesive consumption reaches 7 g/m.
• Automatic exhaust function ensures continuous butyl application.
• PLC control system, touchscreen.
• Glue-free synchronous belt ensures belt cleanliness.
• Main components are made from materials from renowned German manufacturers, ensuring stable operation.
• Automatic gluing head width adjustment ensures uniform butyl application on both sides thanks to a built-in quick-release control valve.
• Use of a movable vertical butyl feed mechanism and horizontal extrusion is convenient and practical.
• On/off time can be adjusted to suit needs

LJZW2020 Automatic Frame Bending Machine
Key Features
• Siemens 1200 PLC control system with high operating speed
• 4 storage groups
• Automatic cutting and feeding of aluminum frames
• Automatic pin jam prevention during bending and cutting
• Continuous frame bending
• Aluminum frames available in sizes from 6A to 27A
• Various bending tools for different frame sizes
• Pause and reset device for handling equipment malfunctions
• Curved aluminum frame, smooth stainless steel, heat-resistant spacer
• USB port function for direct reading of Excel files

LJGZ 2020 Molecular Sieve Frame Filling Machine
Main Features
• Siemens PLC control system
• Molecular sieve size ranges from 0.5mm to 0.9mm
• Simple and intuitive touchscreen interface
• Machine height can be adjusted to suit frame size
• Automatic loading and refilling of molecular sieve
• Dual discharge tubes increase filling speed
• Adjustable filling time
• Automatic drilling, filling, and sealing
• Main components are imported brands
• Filling with large molecular sieve particles

LJSKJ02
Automatic conveyor for moving filled assembled aluminum frames to the glass unit assembly area on the line.
Standard machine.

DS-ICT3826-A Multifunctional Glass Cutting Table
Integrated glass cutting table: it combines three functions: loading, cutting, and
breaking glass. It has a smaller footprint, more features, and is flexible and convenient!
The operating process is as follows: the rotating arm flips over and extends forward. Upon contact with the glass, the suction cup begins to pick up the glass. Once a vacuum is achieved, the suction cup arm retracts and lowers. The glass is placed horizontally on the work table. The fan turns on, the positioning stand rises, bringing the glass closer to the positioning stand. The fan then turns off, and the positioning stand lowers, after which cutting begins. After the glass is cut, the fan turns on to break the glass on the work table. The glass is separated into small pieces using a breaking rod. The small pieces are removed, the work table is cleared, and then the next cycle begins.

DS-ICT3826-A-B-T Multifunctional Glass Cutting Table
Integrated glass cutting table: it combines three functions: loading, cutting, and
breaking glass. It has a smaller footprint, more features, and is flexible and convenient!
The operating process is as follows: the rotating arm flips over and extends forward. Upon contact with the glass, the suction cup begins to pick up the glass. Once a vacuum is achieved, the suction cup arm retracts and lowers. The glass is placed horizontally on the work table. The fan turns on, the positioning stand rises, bringing the glass closer to the positioning stand. The fan then turns off, and the positioning stand lowers, after which cutting begins. After the glass is cut, the fan turns on to break the glass on the work table. The glass is separated into small pieces using a breaking rod. The small pieces are removed, the work table is cleared, and then the next cycle begins.

DS-CM4228-D1
Automatic glass cutting line.
Complete set consisting of a loading station, glass cutting table, and glass breaking table.
Technical Specifications
1) Cutting speed - 180 m/min
2) Cutting acceleration - 6-8 m/s²
3) Linear accuracy - ±0.15 mm
4) Perimeter cutting accuracy - ±0.2 mm
5) Diagonal accuracy - ±0.35 mm/m²
6) Cutting thickness range - 3-19 mm
7) Glass format - from 4200×2800 mm to 18000×330

DS-CM6133-D1
Automatic glass cutting line.
Complete set consisting of a loading station, glass cutting table, and glass breaking table.
Technical Specifications
1) Cutting speed - 180 m/min
2) Cutting acceleration - 6-8 m/s²
3) Linear accuracy - ±0.15 mm
4) Perimeter cutting accuracy - ±0.2 mm
5) Diagonal accuracy - ±0.35 mm/m²
6) Cutting thickness range - 3-19 mm
7) Glass format - from 6100×3300 mm to 18000×330

Automatic Glass Cutting Line EGCNC6133.
Jumbo glass format, double-sided loading station, glass cutting table with low-e coating removal option, pneumatic breaking table.
Technical Parameters:
1) Top Size Range: Minimum top size: 2400x1500 mm (single surface);
2) Maximum film top size: 6100x3300 mm;
3) X-Axis Travel Speed: 5~25 m/min (adjustable);
4) Y-Axis Travel Speed: 8~12 m/min (adjustable);
5) Feed Speed: 5-25 m/min (adjustable);
6) Number of Pivot Arms: 12 arms (double pivot);
7) Number of Suction Cups per Arm: Four;
8) Power source: AC 380 V / 50 Hz
9) Total unit power: 8-18.5 kW;
10) Compressed air: 0.6~0.8 MPa

DISAI DS-LP2520-90 Intelligent Glass Sorting System
DISAI DS-LP2520-90 Intelligent Glass Sorting System
Description
Vertical glass sorting station: Its primary function is to sort cut glass by customer name, size, and type, and correctly label it for easy identification.
Operating process: Start the equipment, place each glass on the receiving table, and then transfer it to the measuring table (the code has been scanned or the size has been measured during the transfer process, and the glass has been identified). Different glasses will be placed in different bins, and once all the glasses are in the bins, workers can choose how to remove them from the bin. Sorting can be performed by customer, by size, by glass type, or in pairs with specific bins.

DS-DR-ISS4228-AB6  Intelligent Sheet Glass Storage System
SYSTEM DESCRIPTION
Intelligent Glass Storage System: The DISAI intelligent drawer-type glass storage system consists of four components: a glass rack, chassis, power unit, protective net, and control system. It can record the type and quantity of glass in each rack and quickly switch between glass types for efficient production.
Storage system functionality:
1) Can be connected to an office ERP system for real-time inventory data transfer.
2) Easily handle glass of various sizes.
3) The quantity and type of glass in the warehouse can be tracked at any time.
4) Can improve glass production productivity and reduce waste.
5) Increases production efficiency and reduces glass handling time.