Главная

JQK6-CNC-120 CNC PVC WINDOW CLEANING MACHINE (6 TOOLS)
1. CNC machine used to clean the welding slag in the corners of the window frame and sash at 90°.
2. Can process the outer corner, the upper and lower part of the corner surface, the inner corner sealing rubber groove and the inner plane of the casement window, the sealing groove of the outer corner of the casement window, the inner corner joint of the sliding window.
3. Six CNC corner cleaning tools control the process flow, simplifying the operation.
4. This machine has the function of compensating the corner arches.
5. The machine can store more than 100 profile processing programs.
6. According to the conditions on the site, the values ​​are randomly dialed, and the processing program is adjusted so that the weld seams with deviations due to the dimensional accuracy of the profiles can be effectively cleaned.

SINON LJJ02A-CNC-500 CNC SERIAL CUTTING SAW
LJJ02A-CNC-500 automatic feed aluminum cutting saw machine. It is a fully automatic CNC machine specially used for cutting corner connectors. The saw blade is made of imported hard alloy, driven by a powerful motor.

AGBS350 Aluminum Window CNC Glazing Bead Cutting Saw
Features:
1. This glazing bead saw is suitable for cutting aluminium glazing bead at 90 degree.
2. Equipped with portable wireless measuring system. Precise and easy measuring.
3. High precision spindle saw blade motor, stable performance.
4. The machine adopts square rail, imported gear rack drive, speedy and high repeat positioning accuracy.
5. Schneider PLC, Servo motor and Schneider servo driver assure long time & stable running.
6. Excellent processing accuracy 0. 1mm

FENSTEK AGBS3000 Automatic Glass Bead Cutting Machine
UPVC Window CNC Glazing Bead Saw
Features:
1.Automatic 45 degree cutting u-PVC glazing bead profile.
2.Two glazing bead cutting in one time.
3.Automatic saw blade feeding by pneumatic cylinder and moving on precise rod.
4.4 pieces saw blade ensure precise cutting, Double cutting one each end to mill the hook foot.
5.Vertical clamping device and special designed cutting jig ensure stable positioning.
6.Two hand safety operation
7.Friendly using measuring rod.
8.Precise & easy operated measuring table (Only for GBST1800)

LJMJA-CNC-500
Aluminum Window Automatic Corner Key Cutting Saw
Features:
1. This CNC corner key cutting saw mainly for high volume cutting of aluminium profile ofindustrial application
2. Large cutting capacity for wide profile or several working piece cutting
3. with support of cutting jig to accommodate profile shape.
4. Auto setting cutting length.
5. PLC , servo motor and ball screw assure easy and precise setting and cutting
6. Adjustable parameter for saw blade feeding to improve production efficiency.
7. Vertical and horizontal clamping assure precision.
8. Hydraulic and pneumatic cylinder assure smooth cutting surface
9. Special collected box receive corner key.

ALUMINUM CUTTING SAW SINON LJKJ-500. 500 MM BLADES. SERVO DRIVE
LJKJ-500 Automatic cutting saw for facade profiles Application: this machine is used for processing aluminum facade profiles. The movement of the sawing units is automatic, along the work table with a fixed workpiece. The setting of the cutting angle on each sawing unit is carried out manually, using a special key, on a worm gear. The indicators of the set angles are displayed on two electronic displays.

LJK-600
Aluminum Window Notching Saw
Description:
1. This aluminum saw is specially designed for processing aluminum curtain walls and skylights with a special angle on the end surface of the profile.
2. With a magnetic grid control system, realized cutting angle and digital display of the working table height.
3. Two saws are freely changed to +45º～-45º
4. The movement of the saw units is carried out on a servo drive, the cutting angles are set manually, using a special key. The current cutting angle is transmitted to the electronic display for each saw unit separately

CCM160 Aluminum Window Corner Crimping Machine
Features:
(1) Aluminum window corner crimping machine is used for high efficient assembly of aluminium window and door.
(2) It is driven by air pressure, the action is faster and more stable, and there is no noise, no pollution, safe and reliable.
(3) Fast cutter locking device, adjust tool up and down (magnet type) faster.
(4) Corner crimping height 160 mm, five seconds one corner.
(5) The left and right corner crimping cutter can be adjusted separately, have good synchronism and high quality of corner crimping.
(6) Kinds of assistant position system suit for different window dimension.
(7) More energy saving and environmental protection, the total electricity consumption is less than 100W, greatly reducing the cost of use.

CCM120 CORNER CRIMPING MACHINE 120 mm
Aluminum Window Corner Crimping Machine
Features:
1. Aluminum corner crimper mainly used for crimping the 90 corner of aluminum window and door
2. Adopt new mechanical linkage device ,realized complete synchronous corner combining
3. Adjustable locating device suitable for various sections and sizes processing
4. Left and right punching heads adopt hard synchronous feeding device ,thus avoideduseless deformation and made the connection more firmly.
5. Easy machine setting due to the synchronous feeding device.

LZJ03-130 CORNER CRIMPING MACHINE. 130MM
LZJ03-130. Angle crimping press for aluminum profiles, suitable for all kinds of aluminum alloy doors and windows, including thermal break profiles and ordinary aluminum profiles
Main Features
Universal corner crimping machine for aluminum profiles. The hydraulic system has the advantages of high power, wide range of profiles and stable operation. It is suitable for the production of all aluminum doors and windows.
Pneumatic compression in the vertical direction can easily adjust the position. It is suitable for any series of profiles and greatly improves the flatness of the group angle.
The foot switch control can step-by-step control the positioning and grouping of the inclination angle.
The standard set includes three corner knives of different thickness, which can be combined as desired and are suitable for different profiles. (The knife can be adjusted depending on the profile)

TEM200 Twin Head End Milling Machine For PVC Window Processing
Feature:
1. End milling machine TEM200 is used for milling the transom and door frames in UPVC and aluminum profile.
2. Two motors are connected with two shafts directly.
3. Milling several pcs profile in one cycle.
4. Milling cutter up and down adjustment as well as left and right adjustment for various section of profile .
5. Big diameter for milling cutter, high cutting speed.
6. Cutter spindle connected by shaft coupling, cutter working precision does not effect motor spindle running precision .

LXDB－250 Aluminium window Automatic End Milling Machine
Features:
1.Used for processing aluminum profile end with massive milling.
2.Universal cutter, no need special milling cutter for different profile. Saving cost and cutter replacing time.
3.Super precision main shaft insured accurate and steady processing
4.Hydraulic Feeding device ensure stable feeding..
5.Convenient tool adjustment meets different processing requirements.

SINON LSKC03-100 UPVC Lock Hole Drilling Machine
1. Hydro-pneumatic actuator cylinder feeding device of the drill system to reduce labor intensity.2. For milling handle hole, Euro groove slot and various hole or slot of the PVC window profile.
Main Features
1. Hydro-pneumatic actuator cylinder feeding device of the drill system to reduce labor intensity.
2.For milling handle hole, Euro groove slot and various hole or slot of the PVC window profile.
3. Horizontal triple heads drilling and vertical copy router with special cutout working table to realize one time finishing.
4.Lock hole Triple heads are behind of the machine bed.
5.Easy adjustment of the height of the triple drill head
6.Adopts gas-liquid damping automatic feeding for Triple drilling heads, reducing the labor intensity of workers.
7. Routing to stops or universal template in 1:1 ratio.
8. Pneumatic horizontal clamping.
9. Equipped with standard hole template. Plain template is standard equipped or specific designed.

MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.

TAWSM3 UPVC Window Double Head Water Slot Milling Machine
Feature:
1. UPVC water slot milling machine mainly used for milling all kinds of water slots and air pressure balance grooves.
2. Two groups of three-axis milling heads along guide, with high precise processing and high production efficiency.
3. The length of milling water slot within 60mm is adjustable and use widely.
4. Absolute milling feeding without professional maintenance and high quality.
5. Apply to high grade and mass windows production.

SINGLE-HEAD FRONT SAW SINON SSJ06-450
Single-head front saw for cutting aluminum and PVC profiles -45, 90, +45 degrees.
450 mm saw blade ● Suitable for cutting PVC and aluminum profiles. ● Angle range: 45°, 90°, 135°, the angle of rotation is adjusted manually. ● The saw blade rotates smoothly thanks to the high-precision main spindle box, ensuring stable operation with high precision

SINGLE-HEAD BOTTOM FEED SAW
LJZ2F-500 Single-head bottom feed saw for cutting aluminum at various angles. 500mm saw blade. Cutting range 25-155 degrees
MAIN FEATURES
Suitable for door and window profiles, LED lamp frame profiles, curtain wall profiles, etc. Cutting aluminum and PVC profiles. Cutting angle: 25 ° - 155 ° Equipped with a saw blade with a diameter of 500 mm. Equipped with a 3.5m long calibration table and a 4m high profile table. Equipped with a cutting protective screen that automatically lowers when cutting to prevent metal chips from splashing. Horizontal and vertical clamping devices, stable cutting. High precision, high cutting stability, good appearance of the whole machine

SINGLE-HEAD SAW WITH BOTTOM FEED SINON LJZ2F-600, 600 MM DISC
JZ2F-600 Automatic single-head saw with bottom feed. Cutting aluminum door and window profiles at an angle of 15-165 degrees. Saw blade diameter 600 mm
Features
1. This automatic single head aluminum profile cutting machine mainly used for cutting aluminum and PVC profiles, with bottom-up saw blade feeding type.
2. This machine is suitable for cutting industrial aluminum and facade profiles, aluminum doors and windows.
3. Equipped with feeding and measuring roller table.
4. The working table is adjustable to increase the cutting area.

Thermal Break Assembly Machine

Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of knurling machine with strip feeder device
1 set of rolling machine
Daily capacity is 5~6 Tons per 10 hours

Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours