Главная

FENSTEK CMC-4-2500 CNC COPY MILLING MACHINE 2500 MM, SERVO DRIVE
CMC4-2500 CNC Copy Milling Machine for Aluminum Windows and Doors
1. CMC3-2500 aluminum window making machine is an advanced industrial CNC profile processing system - 3+1 axis. The rotary table is equipped with servo motor.
2. Suitable for processing aluminum, PVC and other light metals;
3. The machine can complete milling, drilling, tapping, chamfering, grooving and other multi-functional operations precisely at one time.
4. The working table can be set at any angle from +90° to -90°. The rotary table is driven by servo motor.

CEM350 Aluminium Window & Door CNC End Milling Machine
Features:
1. Cnc 5 Axis End Milling Machine CEM350 is suitable for forming processing of all kinds of profile end face and step surface.
2. Five-axis automatically end milling machine, no need change end milling cutters, no need additional end milling cutter cost.
3. High processing accuracy: high power Italian spindle motor with higher processing quality. No Burrs.
4. Two separate sets of 3.5 mm saw blade, one of which can be adjusted at 0 °and 90 °. Completely solving gap headache issue.
5. Same section with different length profile can be milled in one time. High volume production.
6. The feeding system is driven by servo motor, the speed and position are adjustable, , the cutting feed is stable and even, the machining precision is high, the surface quality is good.
7. Fully covered structure. Safer and less noisy for operator.

ACC120A CNC Corner Cleaner For PVC Window Processing, 2-Axis
Feature:
1. Most stable welcomed mature CNC corner cleaning machine for pvc window processing.
2. Totally 5 cutters(two pieces of vertical milling cutters, two pieces of pulling cutters, one piece of saw blade) will be automatically cleaning surface, vertical and inside rubber gasket groove. No need tool change.
3. The milling cutters are controlled by spindle motor, much more stable, they are in the CNC axis, very easy to adjust.
4. Two axis moved by ball screw shaft.
5. Within 25 seconds finish one corner complete cleaning.
6. Can be linked with horizontal welding machine to become welding & corner cleaning production line for grand imagine and high efficiency.
7. Friendly operation. Quick learning.
8. Optional: one piece of horizontal milling cutter, used for sliding window.

ACC120F Four Axis CNC Corner Cleaner
Features:
1.Most stable welcomed mature CNC corner cleaning machine.
2.Totally 8 cutters(two pieces of vertical milling cutters, two pieces of pulling cutters, one piece of saw blade,two pieces of hooking blade,one piece of horizontal milling blade) will be automatically cleaning surface, vertical ,horizontal and inside rubber gasket groove,inner part corner. No need tool change.
3.Advanced IPC controlled full machinery automatically precise running.
4.The milling cutters are controlled by spindle motor, much more stable, they are in the CNC axis, very easy to adjust.
5.Diagonal and arc difference compensation function.
6.Four axis moved by ball screw shaft.
7.Within 25 seconds finish one corner complete cleaning.

DACC120A CNC Double Head Corner Cleaner
Features:
1. Cleaning of welding angle seam for plastic doors and windows
2. Two CNC machine head transport, one-time completion of rectangular frame (fan) two angles cleaning, more efficient.
3. Can complete all kinds of profile facade, upper and lower plane weld, inner angle slope, inner right angle, inner groove and other functions.
4. Adopt spindle motor, high precision.
5. The machine head feed adopts the high precision square rail motion pair, effectively guarantees the machine precision.
6. Single head teaching, you can complete the four-corner program programming, simple and convenient.
7. Based on the industrial control computer platform, the program is specially developed according to the door and window industry; the whole Chinese operation interface is simple and intuitive; the interface is reserved for the enterprise to realize the information management.

AGBS350 Aluminum Window CNC Glazing Bead Cutting Saw
Features:
1. This glazing bead saw is suitable for cutting aluminium glazing bead at 90 degree.
2. Equipped with portable wireless measuring system. Precise and easy measuring.
3. High precision spindle saw blade motor, stable performance.
4. The machine adopts square rail, imported gear rack drive, speedy and high repeat positioning accuracy.
5. Schneider PLC, Servo motor and Schneider servo driver assure long time & stable running.
6. Excellent processing accuracy 0. 1mm

FENSTEK AGBS3000 Automatic Glass Bead Cutting Machine
UPVC Window CNC Glazing Bead Saw
Features:
1.Automatic 45 degree cutting u-PVC glazing bead profile.
2.Two glazing bead cutting in one time.
3.Automatic saw blade feeding by pneumatic cylinder and moving on precise rod.
4.4 pieces saw blade ensure precise cutting, Double cutting one each end to mill the hook foot.
5.Vertical clamping device and special designed cutting jig ensure stable positioning.
6.Two hand safety operation
7.Friendly using measuring rod.
8.Precise & easy operated measuring table (Only for GBST1800)

LJMJA-CNC-500
Aluminum Window Automatic Corner Key Cutting Saw
Features:
1. This CNC corner key cutting saw mainly for high volume cutting of aluminium profile ofindustrial application
2. Large cutting capacity for wide profile or several working piece cutting
3. with support of cutting jig to accommodate profile shape.
4. Auto setting cutting length.
5. PLC , servo motor and ball screw assure easy and precise setting and cutting
6. Adjustable parameter for saw blade feeding to improve production efficiency.
7. Vertical and horizontal clamping assure precision.
8. Hydraulic and pneumatic cylinder assure smooth cutting surface
9. Special collected box receive corner key.

LJK-600
Aluminum Window Notching Saw
Description:
1. This aluminum saw is specially designed for processing aluminum curtain walls and skylights with a special angle on the end surface of the profile.
2. With a magnetic grid control system, realized cutting angle and digital display of the working table height.
3. Two saws are freely changed to +45º～-45º
4. The movement of the saw units is carried out on a servo drive, the cutting angles are set manually, using a special key. The current cutting angle is transmitted to the electronic display for each saw unit separately

CCM160 Aluminum Window Corner Crimping Machine
Features:
(1) Aluminum window corner crimping machine is used for high efficient assembly of aluminium window and door.
(2) It is driven by air pressure, the action is faster and more stable, and there is no noise, no pollution, safe and reliable.
(3) Fast cutter locking device, adjust tool up and down (magnet type) faster.
(4) Corner crimping height 160 mm, five seconds one corner.
(5) The left and right corner crimping cutter can be adjusted separately, have good synchronism and high quality of corner crimping.
(6) Kinds of assistant position system suit for different window dimension.
(7) More energy saving and environmental protection, the total electricity consumption is less than 100W, greatly reducing the cost of use.

CCM120 CORNER CRIMPING MACHINE 120 mm
Aluminum Window Corner Crimping Machine
Features:
1. Aluminum corner crimper mainly used for crimping the 90 corner of aluminum window and door
2. Adopt new mechanical linkage device ,realized complete synchronous corner combining
3. Adjustable locating device suitable for various sections and sizes processing
4. Left and right punching heads adopt hard synchronous feeding device ,thus avoideduseless deformation and made the connection more firmly.
5. Easy machine setting due to the synchronous feeding device.

TEM200 Twin Head End Milling Machine For PVC Window Processing
Feature:
1. End milling machine TEM200 is used for milling the transom and door frames in UPVC and aluminum profile.
2. Two motors are connected with two shafts directly.
3. Milling several pcs profile in one cycle.
4. Milling cutter up and down adjustment as well as left and right adjustment for various section of profile .
5. Big diameter for milling cutter, high cutting speed.
6. Cutter spindle connected by shaft coupling, cutter working precision does not effect motor spindle running precision .

LXDB－250 Aluminium window Automatic End Milling Machine
Features:
1.Used for processing aluminum profile end with massive milling.
2.Universal cutter, no need special milling cutter for different profile. Saving cost and cutter replacing time.
3.Super precision main shaft insured accurate and steady processing
4.Hydraulic Feeding device ensure stable feeding..
5.Convenient tool adjustment meets different processing requirements.

MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.

TAWSM3 UPVC Window Double Head Water Slot Milling Machine
Feature:
1. UPVC water slot milling machine mainly used for milling all kinds of water slots and air pressure balance grooves.
2. Two groups of three-axis milling heads along guide, with high precise processing and high production efficiency.
3. The length of milling water slot within 60mm is adjustable and use widely.
4. Absolute milling feeding without professional maintenance and high quality.
5. Apply to high grade and mass windows production.

HW2S260 Double Head Welding Machine for Laminated Profile Welding
FEATURES
1. The double head welding machine for PVC window is specially designed for welding PVC laminated window profile with 0.2mm welding result.
2. High efficiency of welding and surface cleaning in one machine.
3. Manual adjustment can also realize 2mm welding.
4. Unique maximum welding height of 260mm.
5. All movement systems adopt high-precision square bearings.
6. Pneumatic braking device.
7. Solid base and machine structure ensure long service life with high precision.
8. Profile clamp ordered separately can meet the processing requirements of various profiles

FENSTEK SH-02 SINGLE-HEAD WELDING MACHINE
Features:
1. Single-head welding machine for UPVC windows is specially designed for welding at 90 degrees.
2. It can also weld at different angles between 0 and 180 degrees.
3. PLC-controlled machine operation.
4. Control of two separate clamping devices for easy operation.
5. It can weld white profile (2mm) and color profile (0.2mm). Mode switching is automatic, from the computer.

ADSSE Auto Screw Driver Machine for UPVC Window Features:
1. Auto Screw Driver Machine is a stationary Screwdriver. Advancing Unit with integrated Screw Feeder to insert screws into wood, plastics or metal, e. g. to fix the reinforcement in UPVC profiles.
2. Automatic: Integrated screw feeding system and automatic start of the hopper movement when operating.
3. Flexible Production: Work piece height (screwing level) can vary between 35 and 95 mm above the base plate. 4. High Efficiency: Screw driving cycle time to insert one self-drilling screw (3,9 x 19mm) for reinforcement fixing approx. 2 seconds.
5. Stable: Feed capacity 30 or 80 screws per minute depending on dimension of screw

ADSSE2 UPVC Window & Door Auto Screw Driver Machine Feature:
1. Auto screw driver machine ADSSE2 is a stationary Screwdriver Advancing Unit with integrated Screw Feeder to insert screws into wood, plastics or metal, e.g.to fix the reinforcement in PVC profiles.
2. Automatic: Integrated screw feeding system and automatic start of the hopper movement when operating.
3. Flexible Production: Work piece height (screwing level) can vary between 35 and 95 mm above the base plate.
4. Constant screw driving depth for all materials and independent lf the work piece height due to the automatic depth of drive control.
5. Simple Operation: Manual operation by treadle
6. High Efficiency: Screw driving cycle time to insert one self-drillng screw for reinforcement fixing approx.2 seconds.
7. Horizontal clamping device.

ASD-6000
UPVC Window CNC Screwing Drilling Machine
Features:
1. This auto screw driver machine mainly used for inserting screws to mental profile to fix the reinforcement in upvc profile, and drilling installed holes.
2. Inserting and drilling in one machine. The screw spacing and mounting hole position are evenly distributed automatically
3. Machine head is imported from Germany POWERSURT. High reliability.
4. Imported rack and pinion drive, fast speed and high precision.
5. Two separate working areas, each work area can be placed 4 pcs as client requirement, and the discharge is not stopped.
6. Schneider controlling system based on the windows 7 system. It can be linked with ERP software to data sharing and communication.
7. light curtain can be included as client requirement.
8. Fixture will be probably required as client requirement.