FENSTEK & SINON, CHINA (UPVC & ALUM MACHINES)

SINON SHD01-120
Single Corner PVC Welding Machine

Model: SHD01-120Power Voltage: 220V 50hz 1PhaseInput Power: 1.5 kwWelding Angle: 30°~180°Welding Profile Width: 0-120mmWelding Profile Height: 20-120mmOverall Dimension: 1200x900x1500mmWeight: 300KG

FENSTEK HTW2-120
DOUBLE-HEAD WELDING MACHINE
Features
1. The double-head welding machine for UPVC windows is the most popular type of equipment with 2mm welding.
2. The guide with insert is used.
3. The last head of the machine can weld at different angles from 30 to 180 degrees.
4. The solid base and structure of the machine ensure a long service life with high dimensional accuracy.
5. The profile fastener ordered separately can meet the processing requirements of profiles of different heights.
6. The special profile fastener is easy to replace, which ensures high strength of the angle and good cleaning afterwards.
7. Each head of the machine can work separately or in combination

HW2S260 Double Head Welding Machine for Laminated Profile Welding
FEATURES
1. The double head welding machine for PVC window is specially designed for welding PVC laminated window profile with 0.2mm welding result.
2. High efficiency of welding and surface cleaning in one machine.
3. Manual adjustment can also realize 2mm welding.
4. Unique maximum welding height of 260mm.
5. All movement systems adopt high-precision square bearings.
6. Pneumatic braking device.
7. Solid base and machine structure ensure long service life with high precision.
8. Profile clamp ordered separately can meet the processing requirements of various profiles

FENSTEK SH-02 SINGLE-HEAD WELDING MACHINE
Features:
1. Single-head welding machine for UPVC windows is specially designed for welding at 90 degrees.
2. It can also weld at different angles between 0 and 180 degrees.
3. PLC-controlled machine operation.
4. Control of two separate clamping devices for easy operation.
5. It can weld white profile (2mm) and color profile (0.2mm). Mode switching is automatic, from the computer.

TEM200 Twin Head End Milling Machine For PVC Window Processing
Feature:
1. End milling machine TEM200 is used for milling the transom and door frames in UPVC and aluminum profile.
2. Two motors are connected with two shafts directly.
3. Milling several pcs profile in one cycle.
4. Milling cutter up and down adjustment as well as left and right adjustment for various section of profile .
5. Big diameter for milling cutter, high cutting speed.
6. Cutter spindle connected by shaft coupling, cutter working precision does not effect motor spindle running precision .

LXDB－250 Aluminium window Automatic End Milling Machine
Features:
1.Used for processing aluminum profile end with massive milling.
2.Universal cutter, no need special milling cutter for different profile. Saving cost and cutter replacing time.
3.Super precision main shaft insured accurate and steady processing
4.Hydraulic Feeding device ensure stable feeding..
5.Convenient tool adjustment meets different processing requirements.

SINON LSKC03-100 UPVC Lock Hole Drilling Machine
1. Hydro-pneumatic actuator cylinder feeding device of the drill system to reduce labor intensity.2. For milling handle hole, Euro groove slot and various hole or slot of the PVC window profile.
Main Features
1. Hydro-pneumatic actuator cylinder feeding device of the drill system to reduce labor intensity.
2.For milling handle hole, Euro groove slot and various hole or slot of the PVC window profile.
3. Horizontal triple heads drilling and vertical copy router with special cutout working table to realize one time finishing.
4.Lock hole Triple heads are behind of the machine bed.
5.Easy adjustment of the height of the triple drill head
6.Adopts gas-liquid damping automatic feeding for Triple drilling heads, reducing the labor intensity of workers.
7. Routing to stops or universal template in 1:1 ratio.
8. Pneumatic horizontal clamping.
9. Equipped with standard hole template. Plain template is standard equipped or specific designed.

SINON HJ02-3500.2/2.A Double Head Welding Machine
FEATURES:
● Popular machinery type.
● Various angles welding between 30 to 180 degree is available on last machine head.
● Solid machinery base and structure ensure long life service with high dimension accuracy.
● profile fixture ordered separately can meet various height profiles' processing requirement
● Special profile fixture is easy to change, for high corner strength and later good cleaning
● Each machine head can be working separately or combination

SINON WHJ-3500*2 Double Head Welding Machine (seamless)

Model:WHJ-3500*2Power supply 220V 50HZTotal power 3.5KWOperation air pressure 0.6-0.8r/minAir consumption 150L/minWelding profile height 20-120mmWelding profile width 0-120mmWelding range 400*3500mmContour dimension(L*W*H) 4500*1200*1800mmWeight 1000kg

MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.

SINON SCX03-3*60 Automatic Water Drainage Milling Machine
Main feature:
1. It is one of the PVC window processing machines, which is used to mill water drainage holes.
2. Full structure with high rigidity, processing beautiful water grooves, high processing quality.
3. Automatic change of cutters on the lower head, one-time fixation to complete the processing of water grooves.
4. High efficiency, suitable for mass production.
5. Special feeding system, no special maintenance, high milling quality.
6. Simple adjustment of the cutter position to process different profiles.
7. The milling length of water grooves is adjustable within 100mm, wide adaptability.
8. Adopt linear motion of the bearing to ensure the processing accuracy.

SINON SCXZ2-60X120x3000 Industrial Double Head Water Slot Milling Machine
Professional Weep Hole Milling

This weep hole milling machine for vinyl profiles is used for weep hole(water slot hole) and air pressure balance hole milling process. It is suitable for standard vinyl window (UPVC window) manufacture.

FENSTEK NLHM-100 Triple Drilling PVC Copy Router
Features:
1. The keyhole drilling system located opposite the operator is easy to operate.
2. Hydropneumatic drive device for feeding the drilling system cylinder to reduce labor intensity.
3. Automatic milling of handle hole, Euro groove and various holes or grooves for processing UPVC window profile.
4. Mechanical turret head with memory for fast positioning.
5. Routing by stops or universal template in a ratio of 1:1.
7. Adjustment wheel for convenient adjustment of the milling height. User-friendly design.
8. Equipped with a standard template for holes. Standard template for special design.
9. Centering stop, manual.

SINON SSKC02-100 PVC Copy Milling Machine
1. Used for milling and triple drilling of aluminum profiles and PVC profiles.
2. The scale of the copy milling operation is 1: 1
3. Drilling and milling various holes for installing door locks, easy to operate
4. Equipped with standard templates

TAWSM3 UPVC Window Double Head Water Slot Milling Machine
Feature:
1. UPVC water slot milling machine mainly used for milling all kinds of water slots and air pressure balance grooves.
2. Two groups of three-axis milling heads along guide, with high precise processing and high production efficiency.
3. The length of milling water slot within 60mm is adjustable and use widely.
4. Absolute milling feeding without professional maintenance and high quality.
5. Apply to high grade and mass windows production.

SINON DX05A-200 PVC AND ALUMINUM MILLING MACHINE. CUTTERS 200 MM.
End Milling Machine For Aluminum Profile DX05A-200 / Medium-type end milling machine / Used for milling the end surface of aluminum profiles for windows and doors DESCRIPTION: ● The cutter disc is simple, thanks to the original design of the interaction of two cutting discs. ● Gas-driven and spray cooling system improves the milling effect and increases the durability of the tool. ● Thanks to the precise manufacturing process, the rotation of the axis and the bearing seat becomes more stable, the noise and vibration are much lower than other models.

SINON DX06A-250 MILLING MACHINE FOR PVC AND ALUMINIUM. CUTTERS 250 MM.
Automatic machine for serial milling of PVC mullions and aluminum crossbars Model - DX06A-250
Main Features
1. The machine is used for milling and cutting the end face of aluminum alloy door and window profile to ensure the connection between the frame and the end face of the mullion/transom.
2. Five sets of tools can be adjusted up and down, left and right to meet the processing requirements of different profiles.
3. No need to adjust the tools, which improves the production efficiency and reduces the cost.
4. It can process multiple profiles at the same time and has high production efficiency.
5. The feeding system uses variable speed feeding mechanism, the milling is more stable and the accuracy is higher.
6. The saw blade has a large diameter and high cutting precision.

LSXZ1B-125 Single-spindle Copy Router Machine PATTERN COPY ROUTING MACHINE is used to process the lock hole, water slot and hardware hole of PVC and aluminum windows and doors. Standard molding board to control the hole size, the copying speed is 1: 1; Equipped with high-speed route copying milling head to ensure the milling accuracy. The double-pitch pattern copying needle design is suitable for different hole sizes. It can process various grooves controlled by the ruler

SINON LDZX01-100 COPY ROUTING MACHINE
High-speed heavy-duty copying machine for aluminum window making machine Features: ● It is used to process several types of holes, grooves and water gaps on aluminum and PVC windows and doors or curtain walls. It is in the middle of the aluminum window making machine line. ● It features compact structure, nice design, reasonable volume, and the air pressure adjusts the starting of the motor. ● Easy replacement of copy guide plate, large useful volume, high efficiency and convenient operation ensure continuous processing and safe operation