FENSTEK & SINON, CHINA (UPVC & ALUM MACHINES)

CEM350 Aluminium Window & Door CNC End Milling Machine
Features:
1. Cnc 5 Axis End Milling Machine CEM350 is suitable for forming processing of all kinds of profile end face and step surface.
2. Five-axis automatically end milling machine, no need change end milling cutters, no need additional end milling cutter cost.
3. High processing accuracy: high power Italian spindle motor with higher processing quality. No Burrs.
4. Two separate sets of 3.5 mm saw blade, one of which can be adjusted at 0 °and 90 °. Completely solving gap headache issue.
5. Same section with different length profile can be milled in one time. High volume production.
6. The feeding system is driven by servo motor, the speed and position are adjustable, , the cutting feed is stable and even, the machining precision is high, the surface quality is good.
7. Fully covered structure. Safer and less noisy for operator.

DACC120A CNC Double Head Corner Cleaner
Features:
1. Cleaning of welding angle seam for plastic doors and windows
2. Two CNC machine head transport, one-time completion of rectangular frame (fan) two angles cleaning, more efficient.
3. Can complete all kinds of profile facade, upper and lower plane weld, inner angle slope, inner right angle, inner groove and other functions.
4. Adopt spindle motor, high precision.
5. The machine head feed adopts the high precision square rail motion pair, effectively guarantees the machine precision.
6. Single head teaching, you can complete the four-corner program programming, simple and convenient.
7. Based on the industrial control computer platform, the program is specially developed according to the door and window industry; the whole Chinese operation interface is simple and intuitive; the interface is reserved for the enterprise to realize the information management.

ACC120F Four Axis CNC Corner Cleaner
Features:
1.Most stable welcomed mature CNC corner cleaning machine.
2.Totally 8 cutters(two pieces of vertical milling cutters, two pieces of pulling cutters, one piece of saw blade,two pieces of hooking blade,one piece of horizontal milling blade) will be automatically cleaning surface, vertical ,horizontal and inside rubber gasket groove,inner part corner. No need tool change.
3.Advanced IPC controlled full machinery automatically precise running.
4.The milling cutters are controlled by spindle motor, much more stable, they are in the CNC axis, very easy to adjust.
5.Diagonal and arc difference compensation function.
6.Four axis moved by ball screw shaft.
7.Within 25 seconds finish one corner complete cleaning.

ACC120A CNC Corner Cleaner For PVC Window Processing, 2-Axis
Feature:
1. Most stable welcomed mature CNC corner cleaning machine for pvc window processing.
2. Totally 5 cutters(two pieces of vertical milling cutters, two pieces of pulling cutters, one piece of saw blade) will be automatically cleaning surface, vertical and inside rubber gasket groove. No need tool change.
3. The milling cutters are controlled by spindle motor, much more stable, they are in the CNC axis, very easy to adjust.
4. Two axis moved by ball screw shaft.
5. Within 25 seconds finish one corner complete cleaning.
6. Can be linked with horizontal welding machine to become welding & corner cleaning production line for grand imagine and high efficiency.
7. Friendly operation. Quick learning.
8. Optional: one piece of horizontal milling cutter, used for sliding window.

ACC120A CNC Corner Cleaner For PVC Window Processing, 2-Axis
INCLUDING INNER BEVEL CLEANING
Feature:
1. Most stable welcomed mature CNC corner cleaning machine for pvc window processing.
2. Totally 5 cutters(two pieces of vertical milling cutters, two pieces of pulling cutters, one piece of saw blade) will be automatically cleaning surface, vertical and inside rubber gasket groove. No need tool change.
3. The milling cutters are controlled by spindle motor, much more stable, they are in the CNC axis, very easy to adjust.
4. Two axis moved by ball screw shaft.
5. Within 25 seconds finish one corner complete cleaning.
6. Can be linked with horizontal welding machine to become welding & corner cleaning production line for grand imagine and high efficiency.
7. Friendly operation. Quick learning.
8. Optional: one piece of horizontal milling cutter, used for sliding window.

MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.

SINON SCX03-3*60 Automatic Water Drainage Milling Machine
Main feature:
1. It is one of the PVC window processing machines, which is used to mill water drainage holes.
2. Full structure with high rigidity, processing beautiful water grooves, high processing quality.
3. Automatic change of cutters on the lower head, one-time fixation to complete the processing of water grooves.
4. High efficiency, suitable for mass production.
5. Special feeding system, no special maintenance, high milling quality.
6. Simple adjustment of the cutter position to process different profiles.
7. The milling length of water grooves is adjustable within 100mm, wide adaptability.
8. Adopt linear motion of the bearing to ensure the processing accuracy.

SINON SCXZ2-60X120x3000 Industrial Double Head Water Slot Milling Machine
Professional Weep Hole Milling

This weep hole milling machine for vinyl profiles is used for weep hole(water slot hole) and air pressure balance hole milling process. It is suitable for standard vinyl window (UPVC window) manufacture.

FENSTEK NLHM-100 Triple Drilling PVC Copy Router
Features:
1. The keyhole drilling system located opposite the operator is easy to operate.
2. Hydropneumatic drive device for feeding the drilling system cylinder to reduce labor intensity.
3. Automatic milling of handle hole, Euro groove and various holes or grooves for processing UPVC window profile.
4. Mechanical turret head with memory for fast positioning.
5. Routing by stops or universal template in a ratio of 1:1.
7. Adjustment wheel for convenient adjustment of the milling height. User-friendly design.
8. Equipped with a standard template for holes. Standard template for special design.
9. Centering stop, manual.

SINON SSKC02-100 PVC Copy Milling Machine
1. Used for milling and triple drilling of aluminum profiles and PVC profiles.
2. The scale of the copy milling operation is 1: 1
3. Drilling and milling various holes for installing door locks, easy to operate
4. Equipped with standard templates

TAWSM3 UPVC Window Double Head Water Slot Milling Machine
Feature:
1. UPVC water slot milling machine mainly used for milling all kinds of water slots and air pressure balance grooves.
2. Two groups of three-axis milling heads along guide, with high precise processing and high production efficiency.
3. The length of milling water slot within 60mm is adjustable and use widely.
4. Absolute milling feeding without professional maintenance and high quality.
5. Apply to high grade and mass windows production.

SINON DX09－CNC-250 CNC MILLING STATION, ALUMINUM
END milling machine for aluminum and PVC windows and doors
Highly efficient and multifunctional
CNC aluminum and PVC window and door making machine, profile face milling machine, suitable for processing trunnions and reinforced trunnions. This type of machine is designed for mass production
7 servo motors, 7 axes
There are 3 cutters in this machine. The three knives can move up and down, back and forth in 6 axes, and the total horizontal movement is 1 axis, so there are 7 axes in the machine.

SINON DX03-CNC-300 CNC MILLING STATION, ALUMINUM
Automatic CNC station for milling the ends of the MULLIONS Model - DX03-CNC-300
Technical Description
1. This machine is suitable for processing aluminum window end profiles, transoms, and restoring the end milling process of journal profile.
2. Three-axis control, digital adjustment of tool up and down, front and back position, adaptable to different processing shapes and sizes.
3. Automatic processing, easy to operate. The program can be saved, and one kind of profile only needs to be adjusted once.
4. Adjustable tools eliminate the need to order tools when processing different profiles, thereby shortening the production preparation cycle and reducing costs.
5. Multiple profiles can be milled at the same time to improve work efficiency.
6. Equipped with servo motor to ensure smooth and efficient operation.
7. Large tool diameter, high cutting speed and good surface quality.
8. Equipped with linear guides to realize high-precision processing

JQK6-CNC-120 CNC PVC WINDOW CLEANING MACHINE (6 TOOLS)
1. CNC machine used to clean the welding slag in the corners of the window frame and sash at 90°.
2. Can process the outer corner, the upper and lower part of the corner surface, the inner corner sealing rubber groove and the inner plane of the casement window, the sealing groove of the outer corner of the casement window, the inner corner joint of the sliding window.
3. Six CNC corner cleaning tools control the process flow, simplifying the operation.
4. This machine has the function of compensating the corner arches.
5. The machine can store more than 100 profile processing programs.
6. According to the conditions on the site, the values ​​are randomly dialed, and the processing program is adjusted so that the weld seams with deviations due to the dimensional accuracy of the profiles can be effectively cleaned.

AWSM3
Auto Water Slot Milling Machine (Three Routers)




Feature:1. Water Slot Milling Machine has three independent routing units for automatic routing and drilling of water slots and ventilation hole in PVC profile.2. Adopt advancing Germany technique.3. Sliding and turret clamp buffers allow quick adjustment.4. Auto moving working table ensure nice milling5. Easy adjustment to realize symmetrical milling.6. Optional Mode: TAWSM3 with twin machine head suitable for mass production.