FENSTEK & SINON, CHINA (UPVC & ALUM MACHINES)

Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours

Thermal Break Assembly Machine

Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.

Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
 Consist of
1 set of knurling machine with strip feeder device
1 set of rolling machine
Daily capacity is 5~6 Tons per 10 hours

SINON LSKC03-100 UPVC Lock Hole Drilling Machine
1. Hydro-pneumatic actuator cylinder feeding device of the drill system to reduce labor intensity.2. For milling handle hole, Euro groove slot and various hole or slot of the PVC window profile.
Main Features
1. Hydro-pneumatic actuator cylinder feeding device of the drill system to reduce labor intensity.
2.For milling handle hole, Euro groove slot and various hole or slot of the PVC window profile.
3. Horizontal triple heads drilling and vertical copy router with special cutout working table to realize one time finishing.
4.Lock hole Triple heads are behind of the machine bed.
5.Easy adjustment of the height of the triple drill head
6.Adopts gas-liquid damping automatic feeding for Triple drilling heads, reducing the labor intensity of workers.
7. Routing to stops or universal template in 1:1 ratio.
8. Pneumatic horizontal clamping.
9. Equipped with standard hole template. Plain template is standard equipped or specific designed.

SINON LDJZ1-120 Pneumatic Screw Driver
LDJZ1-120 is used for fastening the Reinforcement of the PVC window and door /
PLC control system, France Schneider system
FEATURES:
● This machine used for fastening the Reinforcement of the PVC window and door.
● Adopt PLC programming controller, it’s reliable and stably.
● The machine head is adjustable from front to back according to profile width. Front and back distance adjustment adopt infrared distance measurement, the location easy and accuracy.
● Auto feeding and distributing screws by special feeding device, with without screw inspection function, with high working efficiency, it’s the ideal machine for batch window and door factory.
● With standard two sets of 2M supporting bracket.

SINON SHQXJ01 Welding & Corner Cleaning Line
/ Welding cleaning production line for pvc door and window / SHQXJ01 /
The production line is specialized in welding and cleaning outer corners of colored PVC profiles. It can be welded and formed into a rectangular window frame at one time, and the upper and lower welds are cleaned. Then, the completed window is transferred to the corner cleaning unit through the transfer workbench to complete the corner cleaning of the window. CNC Corner Cleaning

Double Head Cutting Machine (digital Display)
LZJ2B-CNS-500*4200
LZJ2B-CNS-500*4200 Used for the profile cutting of aluminum windows and doors, curtain wall and industrial aluminum. Its the first step of aluminium doors and windows manufacturing machines.

1. Designed for Aluminum, PVC and Curtain-wall profile accurate Cutting. Aluminium doors and windows manufacturing machines is most important in processing.
2. Digital display system equipped can be easy readout the accurate cutting length and quantity automatically, ensures a high accurate re-load position and convenient man operation work.

VERTICAL 4-HEAD Welding Machine UPVC
/ SHP4-CNC-180*1800*3000 / Suitable for welding white color PVC profile // Four corner CNC welding machine // The rectangle frame be welded once time /

● Suitable for welding white color PVC profile.
● Adopt 3 axis CNC system control: the user could custom the profile processing parameter, change the profile size easily. It features high location precision, repeat location precision is about ±0.2mm.
● Have error compensation function: it could modify the size error of the window frame effectively.
● Pressure protect/alarm function: to realize the effective quality control should make the machine start and work in normal pressure which strictly conformed tothe requirement so as to avoid quality problem and operational safety.

SINON SWHP4-CNC Four Corner Welding Machine
uPVC Window CNC Four Corner Welding Machine, designed to revolutionize the welding process for uPVC doors and windows. With its CNC control system, simple operation, and convenient adjustment, this machine offers unmatched production efficiency.

Our uPVC Window CNC Four Corner Welding Machine ensures precise and simultaneous welding of all four corners of the window, saving you time and effort. Set the welding parameters, and the machine will automatically execute the welding process, making it ideal for mass production of standard-sized windows.

SINON SCX03-3*60 Automatic Water Drainage Milling Machine
Main feature:
1. It is one of the PVC window processing machines, which is used to mill water drainage holes.
2. Full structure with high rigidity, processing beautiful water grooves, high processing quality.
3. Automatic change of cutters on the lower head, one-time fixation to complete the processing of water grooves.
4. High efficiency, suitable for mass production.
5. Special feeding system, no special maintenance, high milling quality.
6. Simple adjustment of the cutter position to process different profiles.
7. The milling length of water grooves is adjustable within 100mm, wide adaptability.
8. Adopt linear motion of the bearing to ensure the processing accuracy.

SINON SSKC02-100 PVC Copy Milling Machine
1. Used for milling and triple drilling of aluminum profiles and PVC profiles.
2. The scale of the copy milling operation is 1: 1
3. Drilling and milling various holes for installing door locks, easy to operate
4. Equipped with standard templates

SINON DX09－CNC-250 CNC MILLING STATION, ALUMINUM
END milling machine for aluminum and PVC windows and doors
Highly efficient and multifunctional
CNC aluminum and PVC window and door making machine, profile face milling machine, suitable for processing trunnions and reinforced trunnions. This type of machine is designed for mass production
7 servo motors, 7 axes
There are 3 cutters in this machine. The three knives can move up and down, back and forth in 6 axes, and the total horizontal movement is 1 axis, so there are 7 axes in the machine.

SINON DX03-CNC-300 CNC MILLING STATION, ALUMINUM
Automatic CNC station for milling the ends of the MULLIONS Model - DX03-CNC-300
Technical Description
1. This machine is suitable for processing aluminum window end profiles, transoms, and restoring the end milling process of journal profile.
2. Three-axis control, digital adjustment of tool up and down, front and back position, adaptable to different processing shapes and sizes.
3. Automatic processing, easy to operate. The program can be saved, and one kind of profile only needs to be adjusted once.
4. Adjustable tools eliminate the need to order tools when processing different profiles, thereby shortening the production preparation cycle and reducing costs.
5. Multiple profiles can be milled at the same time to improve work efficiency.
6. Equipped with servo motor to ensure smooth and efficient operation.
7. Large tool diameter, high cutting speed and good surface quality.
8. Equipped with linear guides to realize high-precision processing

SINON LZJ04-180 ANGLE CRIMPING MACHINE. 180MM
LZJ04-180. HYDRAULIC ALUMINUM ANGLE CRIMPING MACHINE Total motor power: 3.0 kW Profile processing height: 180 mm Profile width: 100 mm Working pressing force: 80 KN Contour size (L*W*H): 2000×1900×1300 mm Weight: 700 kg
Technical description:
1. The hydraulic aluminum corner crimping machine is not only suitable for the corner assembly of aluminum doors and windows, but also for aluminum curtain walls. When applying pressure, it firmly connects the corners of two aluminum profiles with specially designed wedges.
2. PLC control: The machine is equipped with a programmable logic controller (PLC) for accurate and reliable control. PLC ensures stable operation, and its user-friendly interface simplifies maintenance and operation.
3. Digital display for precise positioning: The main positioning handwheel is equipped with a digital display, ensuring the precise positioning of the machine. This ensures stable and high-quality corner assembly results.

LZJ03-130 CORNER CRIMPING MACHINE. 130MM
LZJ03-130. Angle crimping press for aluminum profiles, suitable for all kinds of aluminum alloy doors and windows, including thermal break profiles and ordinary aluminum profiles
Main Features
Universal corner crimping machine for aluminum profiles. The hydraulic system has the advantages of high power, wide range of profiles and stable operation. It is suitable for the production of all aluminum doors and windows.
Pneumatic compression in the vertical direction can easily adjust the position. It is suitable for any series of profiles and greatly improves the flatness of the group angle.
The foot switch control can step-by-step control the positioning and grouping of the inclination angle.
The standard set includes three corner knives of different thickness, which can be combined as desired and are suitable for different profiles. (The knife can be adjusted depending on the profile)

SINON DX05A-200 PVC AND ALUMINUM MILLING MACHINE. CUTTERS 200 MM.
End Milling Machine For Aluminum Profile DX05A-200 / Medium-type end milling machine / Used for milling the end surface of aluminum profiles for windows and doors DESCRIPTION: ● The cutter disc is simple, thanks to the original design of the interaction of two cutting discs. ● Gas-driven and spray cooling system improves the milling effect and increases the durability of the tool. ● Thanks to the precise manufacturing process, the rotation of the axis and the bearing seat becomes more stable, the noise and vibration are much lower than other models.

LSXZ1B-125 Single-spindle Copy Router Machine PATTERN COPY ROUTING MACHINE is used to process the lock hole, water slot and hardware hole of PVC and aluminum windows and doors. Standard molding board to control the hole size, the copying speed is 1: 1; Equipped with high-speed route copying milling head to ensure the milling accuracy. The double-pitch pattern copying needle design is suitable for different hole sizes. It can process various grooves controlled by the ruler

SINON LDZX01-100 COPY ROUTING MACHINE
High-speed heavy-duty copying machine for aluminum window making machine Features: ● It is used to process several types of holes, grooves and water gaps on aluminum and PVC windows and doors or curtain walls. It is in the middle of the aluminum window making machine line. ● It features compact structure, nice design, reasonable volume, and the air pressure adjusts the starting of the motor. ● Easy replacement of copy guide plate, large useful volume, high efficiency and convenient operation ensure continuous processing and safe operation

SINON SJ02-350 SINGLE-HEAD PENDULUM SAW
Automatic single-head pendulum saw for cutting PVC profiles (350mm) Saw blade Φ350mm×φ30mm. Cutting width: Max 200mm Cutting height: Max 100mm. Cutting angle: 45/90/135

SINON XNSHM01 PVC SASH ASSEMBLY STATION
This sash hardware installation table is mainly used for the quick assembly of door and window hardware. The automatic window frame centering mechanism and up and down adjustment mechanism make the assembly simple and fast, and greatly improve the work efficiency