Главная
There are 46 products.
SINON Thermal Break Aluminium Assembly Machines Set (CNC)
Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.
Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.
Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours
$82,500.00
SINON LDJZ1-120 Pneumatic Screw Driver
SINON LDJZ1-120 Pneumatic Screw Driver
LDJZ1-120 is used for fastening the Reinforcement of the PVC window and door /
PLC control system, France Schneider system
FEATURES:
● This machine used for fastening the Reinforcement of the PVC window and door.
● Adopt PLC programming controller, it’s reliable and stably.
● The machine head is adjustable from front to back according to profile width. Front and back distance adjustment adopt infrared distance measurement, the location easy and accuracy.
● Auto feeding and distributing screws by special feeding device, with without screw inspection function, with high working efficiency, it’s the ideal machine for batch window and door factory.
● With standard two sets of 2M supporting bracket.
LDJZ1-120 is used for fastening the Reinforcement of the PVC window and door /
PLC control system, France Schneider system
FEATURES:
● This machine used for fastening the Reinforcement of the PVC window and door.
● Adopt PLC programming controller, it’s reliable and stably.
● The machine head is adjustable from front to back according to profile width. Front and back distance adjustment adopt infrared distance measurement, the location easy and accuracy.
● Auto feeding and distributing screws by special feeding device, with without screw inspection function, with high working efficiency, it’s the ideal machine for batch window and door factory.
● With standard two sets of 2M supporting bracket.
$5,500.00
OZGENC OMRM111 Manual Milling Machine, 2005
OZGENC OMRM111
Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.
Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.
$950.00
USED OZGENC OMRM-105, 2008 Glass Bead Saw automatic
USED OZGENC OMRM-105, 2008. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic saw blade feed, model OMRM-105, manufacturer OZGENC, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company across the Russian Federation is possible.
Saw for cutting glazing beads with automatic saw blade feed, model OMRM-105, manufacturer OZGENC, Turkey. Year of manufacture 2008, in excellent condition. With measuring roller table included. Location - Samara. Shipment - pickup, delivery by transport company across the Russian Federation is possible.
$1,000.00
BU DAIZER PVC-152, 2007g
USED DAIZER PVC-152, 2007 YEAR OF PRODUCTION. SAW FOR CUTTING GLAZING BEAD, TURKEY
Saw for cutting glazing beads with automatic feed of saw blades, model PVC-152, manufacturer DAIZER, Turkey. Year of manufacture 2007, in excellent condition. Without roller table. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.
Saw for cutting glazing beads with automatic feed of saw blades, model PVC-152, manufacturer DAIZER, Turkey. Year of manufacture 2007, in excellent condition. Without roller table. Location - Samara. Shipment - pickup, delivery by transport company in the Russian Federation is possible.
$1,000.00

