Главная
There are 46 products.
SINON Thermal Break Aluminium Assembly Machines Set (CNC)
Thermal Break Assembly Machine
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.
Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours
Thermal break assembly machine is used for producing thermal break aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine.
Thermal Break Machine Introduction:
Thermal break machine is used for producing thermal barrier aluminum profiles, including two machines: knurling machine with plastic strip inserter, rolling machine. The finished product as follows:
Two pieces of aluminum profiles are connected just by polyamide strip. Aluminum can transfer heat or cold very easily, its thermal conductivity is high. But polyamide strip’s thermal conductivity is very low, then can block the heat or cold transferring through aluminum.
Raw material of polyamide strip is 75% nylon and 25% glass-fiber, we call PA66 GF25 or polyamide
Consist of
1 set of CNC knurling machine with strip feeder device
1 set of CNC rolling machine
Daily capacity is 5~6 Tons per 10 hours
$82,500.00
SINON LDJZ1-120 Pneumatic Screw Driver
SINON LDJZ1-120 Pneumatic Screw Driver
LDJZ1-120 is used for fastening the Reinforcement of the PVC window and door /
PLC control system, France Schneider system
FEATURES:
● This machine used for fastening the Reinforcement of the PVC window and door.
● Adopt PLC programming controller, it’s reliable and stably.
● The machine head is adjustable from front to back according to profile width. Front and back distance adjustment adopt infrared distance measurement, the location easy and accuracy.
● Auto feeding and distributing screws by special feeding device, with without screw inspection function, with high working efficiency, it’s the ideal machine for batch window and door factory.
● With standard two sets of 2M supporting bracket.
LDJZ1-120 is used for fastening the Reinforcement of the PVC window and door /
PLC control system, France Schneider system
FEATURES:
● This machine used for fastening the Reinforcement of the PVC window and door.
● Adopt PLC programming controller, it’s reliable and stably.
● The machine head is adjustable from front to back according to profile width. Front and back distance adjustment adopt infrared distance measurement, the location easy and accuracy.
● Auto feeding and distributing screws by special feeding device, with without screw inspection function, with high working efficiency, it’s the ideal machine for batch window and door factory.
● With standard two sets of 2M supporting bracket.
$5,500.00
copy of OZGENC OMRM136, 2014. Corner Crimping Machine
Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.
$4,500.00
FIMTEC SD25/S4 Double Head Cutting Saw (automatic)
Double-head automatic front saw FIMTEC SD25/S4. Designed for cutting two PVC or aluminum profiles at the same time. Saw blades 500 mm, in good condition. The cut length of workpieces at 90 and 45 degrees corresponds to the standard, no errors or backlashes are observed. Cutting at an angle is also within the standard, the angles after cutting match the specified parameters.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.
The machine is located in our warehouse in Samara, is not in serial operation, completely put in order both technically and in terms of appearance. Upon request, we are ready to send photos and videos, organize a video call with the warehouse, and also connect and show the equipment in operation with tests on the client's samples, if there is a desire to come in person and see everything.
We will help with loading onto your transport, we can also help with finding additional cargo. There is a forklift at the base, there will be no problems with sending.
$13,900.00
USED BROGEN OKFM-A, 2012 Automatic Milling Machine
USED BROGEN OKFM-A, 2012. AUTOMATIC MULLION END MILLING MACHINE, TURKEY
Automatic machine for milling the end of the mullion, for one cutter, with pneumatic feed, variable angle, pneumatic clamps. Manufacturer BROGEN, Turkey. Model OKFM-A. Year of manufacture 2012. The condition is excellent, the machine is almost new. Location - Samara. Shipment - pickup, delivery by a transport company is possible. Semi-automatic machine for processing the end of the mullion with a rotary table Brogen OKM-A
Automatic machine for milling the end of the mullion, for one cutter, with pneumatic feed, variable angle, pneumatic clamps. Manufacturer BROGEN, Turkey. Model OKFM-A. Year of manufacture 2012. The condition is excellent, the machine is almost new. Location - Samara. Shipment - pickup, delivery by a transport company is possible. Semi-automatic machine for processing the end of the mullion with a rotary table Brogen OKM-A
$1,500.00

