Главная

DS-DR-ISS4228-AB6  Intelligent Sheet Glass Storage System
SYSTEM DESCRIPTION
Intelligent Glass Storage System: The DISAI intelligent drawer-type glass storage system consists of four components: a glass rack, chassis, power unit, protective net, and control system. It can record the type and quantity of glass in each rack and quickly switch between glass types for efficient production.
Storage system functionality:
1) Can be connected to an office ERP system for real-time inventory data transfer.
2) Easily handle glass of various sizes.
3) The quantity and type of glass in the warehouse can be tracked at any time.
4) Can improve glass production productivity and reduce waste.
5) Increases production efficiency and reduces glass handling time.

LSXZ1B-125 Single-spindle Copy Router Machine PATTERN COPY ROUTING MACHINE is used to process the lock hole, water slot and hardware hole of PVC and aluminum windows and doors. Standard molding board to control the hole size, the copying speed is 1: 1; Equipped with high-speed route copying milling head to ensure the milling accuracy. The double-pitch pattern copying needle design is suitable for different hole sizes. It can process various grooves controlled by the ruler

Double-head welding machine YILMAZ DK502, new model. In excellent condition, year of manufacture 2022. Does not require attachments, all basic checks, settings, maintenance have been completed. Teflon film on welding mirrors has been replaced.
The machine is not in serial operation, it is in warehouse storage. Upon request, we can send additional photos and videos, as well as arrange a video call session, live.
We will help with shipment, we will find options for additional loading or send to the transport company. There is a forklift at the base.
The machine is sold with VAT, we will provide a package of documents - a supply agreement, UPD, invoice, operating instructions, TTN for transportation.

KABAN BB2030. TWO-HEAD WELDING MACHINE
The machine is in excellent condition, almost new. Year of manufacture 2012. Warehouse storage, the machine is fully configured, adjusted, prepared for sale and shipment.
We will help with shipment, we use a forklift in the work.
Cashless sale without VAT, we provide a package of documents for shipment - supply agreement, UPD, acceptance certificates, TTN for transportation.

The stationary single-head saw (pendulum) Yilmaz KD400P is used for cutting aluminum and PVC profiles. The profile clamp is pneumatic, the saw blade is fed manually. The profile cutting angle is 15°, 22.5°, 30°, 45° and 90°, respectively. Additionally, it can be equipped with a measuring roller table MKN300.
For sale is a used YILMAZ KD400P machine. Currently - warehouse storage, the equipment is not in operation. The cut-off saw has undergone routine repairs, the main mechanism for lowering and lifting the saw unit has been replaced, a new 350 mm saw blade has been installed. The coolant supply system is not installed, but it can be considered as a separate option. It is also possible to equip this machine with a new manual measuring roller table MKN 300, payment on a separate invoice.

USED ​​KABAN BA2030, 2020 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine KABAN BA2030, year of manufacture 2020. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

USED ​​MURAT KB513, 2010 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine MURAT KB513, year of manufacture 2010. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

Single-head welding machine YILMAZ TK501. Standard edition. The machine is in excellent condition, a new temperature controller is installed. The machine is fully assembled, warehouse storage.
Location: Samara. Shipment - pickup, can be sent to a transport company or as additional cargo
Upon request, we will provide additional photos and videos of the work. A video call with the warehouse in real time is possible. You can also come personally to our warehouse, bring your samples and test the machine in operation on samples. We will connect, demonstrate the work.
The sale of the machine is carried out by bank transfer without VAT, we will provide instructions in electronic form. A package of documents - a supply agreement, an acceptance certificate, UPD, TTN for transportation.

USED ​​YILMAZ FR225 2017 YEAR OLD COPY-MILLING MACHINE, TURKEY
Manual feed copy-milling machine YILMAZ FR-225, for milling a triple hole for handles, as well as a groove for a lock. Year of manufacture 2017, the machine is in excellent condition. Currently in warehouse storage. Location - Samara. We can send photos and videos WhatsApp, and also demonstrate the work in person if the client comes to the warehouse. We will help with shipment, pack the equipment in stretch film, we can hand it over to the TC. We sell by bank transfer without VAT, contract, acts pp, UPD and TTN.

Automatic machine for milling of impost YILMAZ KM215, with quick release, 2013. In excellent condition. Everything works, you can come and check. A new cooling system is installed, for working with aluminum. The equipment is in Samara, in our warehouse. We will help with shipment.
Cashless payment without VAT, we will provide a package of documents - supply agreement, UPD, acts, TTN.

Screw compressor ABAC GENESIS 1110-500. Year of manufacture 2010. Complete with a dryer and a 500-liter receiver. Capacity 1500 l/min. Good condition, full maintenance and service. The meter readings can be seen in the photo carousel.
You can see the status by video call with the warehouse, just agree on the time in advance.
Sale - cashless without VAT, we will provide a set of documents - a supply agreement, UPD, acceptance certificate, TTN for shipment. We will help with loading onto your transport, or we will help find additional cargo to your city in the Russian Federation.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.

USED ​​BROGEN OKFM-A, 2012. AUTOMATIC MULLION END MILLING MACHINE, TURKEY
Automatic machine for milling the end of the mullion, for one cutter, with pneumatic feed, variable angle, pneumatic clamps. Manufacturer BROGEN, Turkey. Model OKFM-A. Year of manufacture 2012. The condition is excellent, the machine is almost new. Location - Samara. Shipment - pickup, delivery by a transport company is possible. Semi-automatic machine for processing the end of the mullion with a rotary table Brogen OKM-A

FENSTEK ADS600*4500 CNC B2B TWO-HEAD FRONT SAW WITH SERVO DRIVE
SUPPLY ON ORDER!!!
TWO-HEAD FRONT SAW FOR ALUMINUM WITH CNC.
Industrial PLC, label printer installed. 600 mm blades, cooling. Maximum cutting length 4500 mm.
Functions:
1. Double-head three-axis front saw with CNC for cutting at any angle.
2. The machine is similar to European models.
3. The machine has a modern control system.
4. The saw blade with direct drive has a lever type of cutting.
5. The saw blades are fed using a hydraulic damping cylinder, ensuring smooth cutting.
6. The imported control system ensures cutting quality.
7. The cutting task can be uploaded to the machine via the network. The cutting length can also be input directly.
8. The servo motor drives the speed reducer, adjusting the cutting angle: 45.0 ° - 135 °.

AVW3000D CNC Vertical Double Layer 4 Point Welding Machine
Features:
1.Double layers for 2 unit one time.High efficiency.
2.Auto positioning and feeding by servo motor. More precise.
3.Solid machinery base and structure ensure long life service with high dimension accuracy.
4.Size tolerance compensation is available to increase welding precision
5.Vertical type occupies less space and is ergonomically good for profile loading.
6.Profile fixture ordered separately can meet various profiles' processing requirement
7.Special “Know — How” technique keep the high corner strength
8.Advanced “Parallel welding “technique is available for the AVW3000P to achieve better
Welding result.

AVW3000 UPVC Window CNC Vertical 4 Point Welding Machine
Features:
1. Four Point Welding Machine is One working cycle, one frame fully automatically UPVC Window Welding Machine.
2. Auto positioning by worldwide famous brand AC servo motor.
3. Solid machinery base and structure ensure long life service with high dimension accuracy.
4. Size tolerance compensation is available to increase welding precision.
5. Vertical type occupies less space and is ergonomically good for profile loading.
6. Profile fixture ordered separately can meet various profiles' processing requirement.
7. Special “Know — How” technique keep the high corner strength.
8. Advanced “Parallel welding “technique is available for the AVW3000P to achieve better Welding result.
9. Optional horizontal model (AHW3000P) is possible to integrate into a welding and cleaning production line with CNC corner cleaning machine at later time.

QUATTRO-W CNC Double Layer Horizontal 4 Point Welding Machine
Features:
1. Top grade PVC window welding machine. Suitable for high quality PVC window manufacturer
2. double layers for 2 unit one time.High efficiency.
3. Seamless and non-seamless function both.
4. Square bearing system guarantee clamping, heating plate, locating plate moving precision
5. The advanced IPC controlling system guarantee user-friendly operation, high precision, long life service , and easy link to other machines or production units.
6. Horizontal type is an ergonomically favorably position for the operator inserting upper profile.
7. Size error compensation is available and high accuracy.
8. Special locating system and impaction device ensured its size precision. Strengthen the corner welding and achieve good corner cleaning effect.

TAWSM3 UPVC Window Double Head Water Slot Milling Machine
Feature:
1. UPVC water slot milling machine mainly used for milling all kinds of water slots and air pressure balance grooves.
2. Two groups of three-axis milling heads along guide, with high precise processing and high production efficiency.
3. The length of milling water slot within 60mm is adjustable and use widely.
4. Absolute milling feeding without professional maintenance and high quality.
5. Apply to high grade and mass windows production.

MHD4-5000 Multi-drilling Machine For PVC Window Processing
Feature:
1. UPVC window drilling machine is used for drilling holes for PVC profiles, and mounting holes for window and doors installation.
2. Multi-drilling head can be added to meet multi-group holes processing in one time.
3. Hydraulic cylinders to ensure steady feeding.
4. PLC control, each machine head can works individual and combination.