Главная

USED ​​MURAT KB513, 2010 YEAR OF PRODUCTION SINGLE-HEAD WELDING MACHINE, TURKEY
Single-head welding machine MURAT KB513, year of manufacture 2010. The machine is in perfect condition, like new, checked, configured. We can show it in operation. It practically did not work, was used for about six months on non-standard and alterations. Warehouse storage, the machine is not used in series, if necessary, we can connect and start it for testing. Location - Samara. We can send to the TC in the Russian Federation, non-cash sale without VAT, there will be a whole package of documents - a supply agreement, UPD, acceptance certificate, TTN for transportation.

Single-head welding machine YILMAZ TK501. Standard edition. The machine is in excellent condition, a new temperature controller is installed. The machine is fully assembled, warehouse storage.
Location: Samara. Shipment - pickup, can be sent to a transport company or as additional cargo
Upon request, we will provide additional photos and videos of the work. A video call with the warehouse in real time is possible. You can also come personally to our warehouse, bring your samples and test the machine in operation on samples. We will connect, demonstrate the work.
The sale of the machine is carried out by bank transfer without VAT, we will provide instructions in electronic form. A package of documents - a supply agreement, an acceptance certificate, UPD, TTN for transportation.

USED ​​YILMAZ FR226 2014 YEAR OLD COPY-MILLING MACHINE, TURKEY
Automatic copy-milling machine YILMAZ FR-226, for milling a triple hole for handles, as well as a groove for a lock. Year of manufacture 2014, the machine is in excellent condition. Currently in warehouse storage. Location - Samara. We can send photos and videos WhatsApp, and also demonstrate the work in person if the client comes to the warehouse. We will help with shipment, pack the equipment in stretch film, we can hand it over to the TC. We sell by bank transfer without VAT, contract, acts pp, UPD and TTN.

USED ​​YILMAZ FR225 2017 YEAR OLD COPY-MILLING MACHINE, TURKEY
Manual feed copy-milling machine YILMAZ FR-225, for milling a triple hole for handles, as well as a groove for a lock. Year of manufacture 2017, the machine is in excellent condition. Currently in warehouse storage. Location - Samara. We can send photos and videos WhatsApp, and also demonstrate the work in person if the client comes to the warehouse. We will help with shipment, pack the equipment in stretch film, we can hand it over to the TC. We sell by bank transfer without VAT, contract, acts pp, UPD and TTN.

NEW PLASTMAK SC-201_2020 G.V. AUTOMATIC END MILLING MACHINE
NEW MACHINE. Face milling machine for milling imposts, automatic, for processing PVC profiles. Without cooling. Model PLASTMAK SC201. The machine is absolutely new, never used. Warehouse storage in a warm warehouse.
Year of manufacture 2020.
Upon arrival at the warehouse, the machine is connected and checked. Upon request, we can send photos and videos of the work, it is also possible to show the machine via video link or you can come and see in person, we will connect, show the machine in operation.
Sale by bank transfer without VAT, under the contract. We will provide a package of documents - a supply agreement, UPD, an acceptance certificate, a waybill for transportation.

USED ​​YILMAZ KM213, 2012 YEAR. AUTOMATIC MILLING MACHINE, TURKEY
Automatic machine for milling the end of the molding, for one cutter, WITHOUT quick release, with pneumatic feed, variable angle, pneumatic clamps. Additionally, you can install a cooling system for working with aluminum. Manufacturer YILMAZ, Turkey. Model KM-213. Year of manufacture 2012. Condition is excellent. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

Automatic machine for milling of impost YILMAZ KM215, with quick release, 2013. In excellent condition. Everything works, you can come and check. A new cooling system is installed, for working with aluminum. The equipment is in Samara, in our warehouse. We will help with shipment.
Cashless payment without VAT, we will provide a package of documents - supply agreement, UPD, acts, TTN.

OZGENC OMRM111

Manual machine for processing PVC profile mullions at angles of -45°...+45°
Profile fixation using a pneumatic system;
Quick-release cutter change system;
Cutter feed using a lever;
Overvoltage (short-circuit current) and overload protection + reinforced motor shaft;
Guide for supporting the processed mullion strip;
Cutter storage compartment.

NEW TATPROF SOKOL MP-640 BS-13600 MANUAL PRESS FOR PROCESSING THE SLIDING SYSTEM C-640
Manual Press BISAL BS 13600 (article of the press manufacturer, Serbia). According to the Tatprof catalog, it has the article number SK.09.465.007.000 for processing Tatprof profiles of the EK-640 system (recently sold under the Sokol MP-640 brand). Designed for processing the PROVEDAL C-640 sliding system, does not require connection to electricity and pneumatics. An ideal option for small production, suitable for use immediately at the construction site. Sold without a frame, in a portable version.

USED ​​URBAN KV2800HF GLAZING UNIT
Glazing and control stand with lifting, manufacturer URBAN, Germany. In good condition. Only compressed air is needed for the equipment to operate. The glazing stand has been tested, it can be demonstrated in operation. Glazing stand without lifting URBAN KV2800HF. Full clamp of the structure at an angle of 90 degrees. The condition is excellent. Only compressed air is needed for the stand to operate.
Location - Samara, warehouse storage. We ship by forklift, side feed, with uncovering.
Shipment - pickup, delivery by a transport company is possible.
Sale - cashless without VAT, we will provide a package of documents - a supply agreement, UPD, acceptance certificates, TTN for the road.

Screw compressor ABAC GENESIS 1110-500. Year of manufacture 2010. Complete with a dryer and a 500-liter receiver. Capacity 1500 l/min. Good condition, full maintenance and service. The meter readings can be seen in the photo carousel.
You can see the status by video call with the warehouse, just agree on the time in advance.
Sale - cashless without VAT, we will provide a set of documents - a supply agreement, UPD, acceptance certificate, TTN for shipment. We will help with loading onto your transport, or we will help find additional cargo to your city in the Russian Federation.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. One piston group is installed new. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara, Warehouse storage. You can check, make a test run in the warehouse. We will help with shipment.

USED ​​COMPRESSOR BEZHETSK KV-30 PISTON COMPRESSOR
Piston compressor Bezhetsk, model KV30 for 2400 liters per minute, receiver 500 liters. In excellent condition. Two used piston groups are installed. Complete maintenance was carried out with replacement of the main consumables - belts, bearings, main relays, starters, as well as replacement of oil and filters.
Location - Samara. Warehouse storage.
You can check, make a trial run in the warehouse. We will help with shipment.

Pneumatic corner crimping press for joining corners of aluminum structures. Manufacturer OZGENC, Turkey. Model OMRM 136. Year of manufacture 2014. Condition is excellent. Included - pedals, side supports, knives. Warehouse storage. Can be connected and checked. Location - Samara. Shipment - pickup, delivery by a transport company is possible.

USED ​​BROGEN OKFM-A, 2012. AUTOMATIC MULLION END MILLING MACHINE, TURKEY
Automatic machine for milling the end of the mullion, for one cutter, with pneumatic feed, variable angle, pneumatic clamps. Manufacturer BROGEN, Turkey. Model OKFM-A. Year of manufacture 2012. The condition is excellent, the machine is almost new. Location - Samara. Shipment - pickup, delivery by a transport company is possible. Semi-automatic machine for processing the end of the mullion with a rotary table Brogen OKM-A

SINGLE-HEAD BOTTOM FEED SAW
LJZ2F-500 Single-head bottom feed saw for cutting aluminum at various angles. 500mm saw blade. Cutting range 25-155 degrees
MAIN FEATURES
Suitable for door and window profiles, LED lamp frame profiles, curtain wall profiles, etc. Cutting aluminum and PVC profiles. Cutting angle: 25 ° - 155 ° Equipped with a saw blade with a diameter of 500 mm. Equipped with a 3.5m long calibration table and a 4m high profile table. Equipped with a cutting protective screen that automatically lowers when cutting to prevent metal chips from splashing. Horizontal and vertical clamping devices, stable cutting. High precision, high cutting stability, good appearance of the whole machine

ZSD-CNC-800 CNC COPY ROUTING MACHINE. SINGLE SPINDLE
Feature
1. The machine adopts a Chinese brand CNC system, The system comes with a common door and window
hole graphics library, which is more convenient
2. The spindle adopts a high-speed spindle with high precision, good safety and high reliability.
3. The X-axis adopts high-precision helical gears and helical rack transmission, and the Y-axis and Z-axis
adopt high-precision ball screw transmission, which has stable transmission and high precision.
4. The worktable automatically reverses -90°, 0°, 90°, and the profile can be clamped once to achieve
three-sided processing. When processing deep through holes (special-shaped holes), deep hole processing is
achieved by flipping the worktable, which is efficient and accurate.
5.There is a 1.5m long support rack on the right side of the machine

ZSSD-CNC-800 CNC COPY ROUTING MACHINE. DOUBLE SPINDLE
Feature
1. The machine adopts a Chinese brand CNC system, The system comes with a common door and window
hole graphics library, which is more convenient
2. The spindle adopts a high-speed spindle with high precision, good safety and high reliability.
3. The X-axis adopts high-precision helical gears and helical rack transmission, and the Y-axis and Z-axis
adopt high-precision ball screw transmission, which has stable transmission and high precision.
4. The worktable automatically reverses -90°, 0°, 90°, and the profile can be clamped once to achieve
three-sided processing. When processing deep through holes (special-shaped holes), deep hole processing is
achieved by flipping the worktable, which is efficient and accurate.
5.There is a 1.5m long support rack on the right side of the machine