YILMAZ MACHINE UPVC & ALUM

YILMAZ DK 502 TWO-HEAD WELDING MACHINE FOR PVC PROFILES
TWO-HEAD WELDING MACHINE YILMAZ DK-502 It is used to connect two corners of a PVC profile by welding.
• Performs a fully automatic procedure for welding PVC profiles at an angle of 90°
• Possibility of precise welding on the left block at angles from 130° to 180°.
• All parameters such as melting and gluing time, welding pressure can be adjusted from the control panel
• Precise welding is ensured thanks to the linear guide mechanism • Two corners of PVC frame and sash profiles are welded in one operation
• Teflon winding system allows practical replacement of Teflon
• Practical system for replacing the welding form prevents loss of time
• Possibility of adjusting the clamp and gluing pressure depending on the type of profile
• Temperature adjustment from 0° to 300°C thanks to the electronic thermostat

YILMAZ TK 503 SINGLE-HEAD WELDING MACHINE FOR PVC PROFILES
TK 503. Single-head welding machine
•Possibility of alternate compression of the profile with each press of the foot pedal.
•Possibility of adjusting the pressure and melting period according to the type of profile.
•Forming plates with adjustable distance for lower and upper welding.
•After compression of the profiles, the welding process is performed automatically.
•Adjustable thermostat, which can be adjusted to the required temperature from 0° to 260° C.
•Min. 1.5mm melting thickness.
•After fixing the profiles, welding is performed automatically.
•The mechanism is manufactured according to CE.
Specifications:
TK 503 1.5 kW, 230 V, 50 Hz h = 130 mm max, a = 30 ° - 180 ° 6-8 bar, 20 l / min 630 x 620 x 1400 mm 115-143 kg

YILMAZ TK 505 SINGLE-HEAD WELDING MACHINE FOR PVC PROFILES
SINGLE-HEAD WELDING MACHINE YILMAZ TK505 Designed for welding corners of colored and laminated PVC profiles.
"Zero seam" - 0-0.2 mm. Allows you to clean the weld with one chisel. Allows you to adjust the clamping and compression pressure. Welded angles from 30 to 180 °.
Melting temperature from 0 to 260 °.
After pressing the profiles - the welding process is automatic. Convenient control via the pedal.
Fully electronic control of the temperature and melting time.

YILMAZ CK 412 GLAZING BEAD CUTTER WITHOUT CULS
AUTOMATIC CULSESS GLAZING BEAD CUTTER YILMAZ CK412 Designed for cutting glazing beads at an angle of 45 degrees. Automatic clamping and feed. Possibility to adjust the feed speed. After cutting, the saw blades automatically return to their original position. The glazing bead cutter is equipped with an eight-position turret stop to simulate pressing the glazing bead against the glass. Included: - 200 mm saw blades - 2 pcs., 110 mm scoring discs - 2 pcs., 2 m roller conveyor, 1.3 m T-square, blow gun. Measuring ruler included. Maximum workpiece cross-section: 90° - 130x75 mm or 45° - 100x75 mm.