YILMAZ DK 502 Double Head Welding Machine

YILMAZ DK 502 TWO-HEAD WELDING MACHINE FOR PVC PROFILES

TWO-HEAD WELDING MACHINE YILMAZ DK-502 It is used to connect two corners of a PVC profile by welding.

• Performs a fully automatic procedure for welding PVC profiles at an angle of 90°

• Possibility of precise welding on the left block at angles from 130° to 180°.

• All parameters such as melting and gluing time, welding pressure can be adjusted from the control panel

• Precise welding is ensured thanks to the linear guide mechanism • Two corners of PVC frame and sash profiles are welded in one operation

• Teflon winding system allows practical replacement of Teflon

• Practical system for replacing the welding form prevents loss of time

• Possibility of adjusting the clamp and gluing pressure depending on the type of profile

• Temperature adjustment from 0° to 300°C thanks to the electronic thermostat

• Possibility of performing the operation depending on the thickness of the seam: standard (2 mm) or zero (0.2 mm)

• The right head is manually moved and the left welding unit is fixedly opened at 90°.

• After fixing the profile, the welding procedure starts automatically

• The right movable welding unit is equipped with a brake system

• For safety reasons, the pistons of the clamps work with a low pressure system

• The machine is equipped with 2 support profiles for windows

STANDARD COMPONENTS

• Frame shape according to the profile height of 60 mm 1 set