YILMAZ MACHINE UPVC & ALUM

YILMAZ DK 502 TWO-HEAD WELDING MACHINE FOR PVC PROFILES
TWO-HEAD WELDING MACHINE YILMAZ DK-502 It is used to connect two corners of a PVC profile by welding.
• Performs a fully automatic procedure for welding PVC profiles at an angle of 90°
• Possibility of precise welding on the left block at angles from 130° to 180°.
• All parameters such as melting and gluing time, welding pressure can be adjusted from the control panel
• Precise welding is ensured thanks to the linear guide mechanism • Two corners of PVC frame and sash profiles are welded in one operation
• Teflon winding system allows practical replacement of Teflon
• Practical system for replacing the welding form prevents loss of time
• Possibility of adjusting the clamp and gluing pressure depending on the type of profile
• Temperature adjustment from 0° to 300°C thanks to the electronic thermostat

YILMAZ TK 503 SINGLE-HEAD WELDING MACHINE FOR PVC PROFILES
TK 503. Single-head welding machine
•Possibility of alternate compression of the profile with each press of the foot pedal.
•Possibility of adjusting the pressure and melting period according to the type of profile.
•Forming plates with adjustable distance for lower and upper welding.
•After compression of the profiles, the welding process is performed automatically.
•Adjustable thermostat, which can be adjusted to the required temperature from 0° to 260° C.
•Min. 1.5mm melting thickness.
•After fixing the profiles, welding is performed automatically.
•The mechanism is manufactured according to CE.
Specifications:
TK 503 1.5 kW, 230 V, 50 Hz h = 130 mm max, a = 30 ° - 180 ° 6-8 bar, 20 l / min 630 x 620 x 1400 mm 115-143 kg

YILMAZ TK 505 SINGLE-HEAD WELDING MACHINE FOR PVC PROFILES
SINGLE-HEAD WELDING MACHINE YILMAZ TK505 Designed for welding corners of colored and laminated PVC profiles.
"Zero seam" - 0-0.2 mm. Allows you to clean the weld with one chisel. Allows you to adjust the clamping and compression pressure. Welded angles from 30 to 180 °.
Melting temperature from 0 to 260 °.
After pressing the profiles - the welding process is automatic. Convenient control via the pedal.
Fully electronic control of the temperature and melting time.

YILMAZ KM 215 S MACHINE FOR PROCESSING MUFFLER ENDS WITH COOLING (WITH VARIABLE ANGLE AND WITH A QUICK-RELEASE DEVICE)
AUTOMATIC MACHINE FOR MILLING MUFFLER ENDS YILMAZ KM215. Designed for processing the ends of aluminum profile mullions. Pneumatic profile clamp. Pneumatic cutter feed (cutting cutter is not included). Shaft diameter 30 mm, maximum cutter diameter 161 mm. Rotation speed 3000 rpm. Included: blow gun.

YILMAZ KM 211 MACHINE FOR PROCESSING MUFFLERS (WITH MANUAL FEED OF CUTTER)
MACHINE FOR MILLING MUFFLERS WITH MANUAL FEED YILMAZ KM211. Designed for processing the ends of PVC and AL profile mullions. Pneumatic profile clamp. Manual cutter feed (cutter not included). Shaft diameter 30 mm, maximum cutter diameter 161 mm. Included: blow gun.

MEM 128
NEW Semi-automatic Mullion Face Milling Machine
This is a multi-purpose face milling machine, operating with a motor-belt mechanism, used in precision serial milling operations on aluminum and PVC profiles
STANDARD COMPONENTS
• 12 pneumatic vertical clamps with adjustable pressure
• A set of horizontal clamps for reliable fixation of profiles
• Pneumatic gun
Maximum end milling stroke (W): 615 mm
Maximum saw blade diameter: Ø 185 mm
Maximum tool height: 150 mm