YILMAZ MACHINE UPVC & ALUM

YILMAZ CDC600 TWO-HEAD AUTOMATIC CNC SAW
YILMAZ CDC600 automatic double-head CNC saw for cutting large PVC and aluminum profiles, straight or at an angle with a Ø 600 mm double-head saw. Saw blade feed from below.
The CDC 600 is a fully automatic machine designed for cutting large PVC and aluminum profiles straight or at an angle with a Ø 600 mm double-head saw. It provides optimum cutting performance in a variety of cutting situations thanks to its large-diameter saw and the rotary-tilt cutting mechanism from below. The left cutting unit is stationary, while the movable right cutting unit automatically switches to measurement. This is a great advantage for the user, as it allows for special angle cuts without having to calculate when performing point-to-point cutting operations.

YILMAZ DC421MS TWO-HEAD SEMI-AUTOMATIC SAW WITH FRONT FEED OF DISKS AND COOLING
The YILMAZ DC421MS semi-automatic two-head frontal cut-off saw with cooling is designed for cutting aluminum profiles. The front output of the cutting disc provides the highest precision of all other methods of feeding the saw blade. The saw is equipped with 420 mm saw blades. The machine is equipped with a conveyor system located to the right of the movable saw blade. Hydropneumatic feed of the saw blade during cutting makes the movement as smooth as possible, the speed of the saw blade output can be changed. The left head is stationary, the right one moves mechanically using a handwheel. Cutting angles vary from 45 ° to 90 °. For cutting at angles of 90 ° and 45 °, the saws tilt automatically. Cutting at intermediate angles is adjusted manually.

DOUBLE HEAD CNC CUTTING MACHINE.
DC 550 PB is full automatic sawing machines that is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminium materials by means of double head sawing units equipped with Ø 550 mm of saw blades.

YILMAZ_DC550SKH TWO-HEAD AUTOMATIC SAW WITH WINDOWS, PRINTER AND DATA EXCHANGE INTERFACE
DC 550SKH. Double-headed saw with Windows, printer and data interface. Saw blades are fed from the front, setting any angles using a servo drive.
•The mechanism with two heads and (550 mm) saw blades is designed for straight and angled cutting of PVC and aluminum profiles.
•The left saw head is fixed, the right one is movable. When sawing at angles of 90° and 45°, the saw blade heads are deflected automatically. When sawing at angles of 15°-22.5°-30° and other average angles, the saw heads are adjusted manually.
•The saw blade movement is hydropneumatic, it is possible to precisely adjust the cutting speed according to the material being processed.

YILMAZ KD 400 PS WITH COOLING SINGLE-HEAD MITER SAW (WITH VARIABLE CUTTING ANGLE)
SINGLE-HEAD PENDULUM SAW WITH COOLING FOR CUTTING PVC AND ALUMINUM
Designed for cutting PVC and AL profiles.
Manual saw blade feed.
Pneumatic profile clamps.
Possible cutting angles: 15° - 22.5° - 30° - 45° - 90°.
Tilt of saw blade to the left: 15°, 30°, 45°.
Maximum cross-section of workpiece: 90° - 205x125 mm; 175x138 mm or 45° - 145x125 mm; 125x138 mm.
Disc diameter - 400 mm, landing - 30-32 mm.
Saw blade, blow gun included.

YILMAZ ACK 420 S ALUMINUM. PROFILE CUTTING SAW (WITH BOTTOM FEED DISC AND COOLING SYSTEM)
SINGLE-HEAD SAW WITH BOTTOM FEED, COOLING AND 420 MM BLADE
Designed for double- and single-sided cutting of PVC and AL profiles.
Possible basic cutting angles 15°, 22.5°, 30°, 45°, 90° and intermediate.
Maximum cross-section of the workpiece: at 90° - 205x125 mm; 175x138 mm or at 45° - 145x125 mm; 125x138 mm.
Hydropneumatic disc feed. Pneumatic clamps and brake system. Adjustable cutting speed.
Included: 420 mm saw blade, 3.0 m measuring roller conveyor, blow gun.

YILMAZ ACK 550 ALUMINUM. PROFILE CUTTING SAW (WITH BOTTOM FEED DISC AND COOLING SYSTEM)SINGLE-HEAD SAW WITH BOTTOM FEED, COOLING, 550 MM DISC
Designed for double- and single-sided cutting of PVC and AL profiles. Possible main cutting angles are 15°, 22.5°, 30°, 45°, 90° and intermediate. Maximum cross-section of the workpiece: at 90° - 205x125 mm; 175x138 mm or at 45° - 145x125 mm; 125x138 mm. Hydropneumatic disc feed. Clamps and pneumatic braking system. Adjustable cutting speed. Included: 550 mm saw blade, 3.0 m measuring roller conveyor, blow gun.

YILMAZ ACK 700 ALUMINUM. PROFILE CUTTING SAW (WITH BOTTOM FEED BLADE)
SINGLE-HEAD SAW WITH BOTTOM FEED, COOLING AND 700 MM BLADE
Designed for double and single-sided cutting of PVC and AL profiles.
Possible basic cutting angles 15°, 22.5°, 30°, 45°, 90° and intermediate.
Maximum cross-section of the workpiece: at 90° - 205x125 mm; 175x138 mm or at 45° - 145x125 mm; 125x138 mm.
Hydropneumatic disc feed. Pneumatic clamps and braking system. Adjustable cutting speed.
Included: 700 mm saw blade, 3.0 m measuring roller conveyor, blow gun.

YILMAZ FR 226S COPY MILLING MACHINE WITH 3-SPINDLE HEAD (HOLES FOR HANDLES AND LOCKS)
AUTOMATIC COPY MILLING MACHINE YILMAZ FR226S.
Designed for milling holes for locks and handles in PVC and AL profiles. Makes holes in different directions. Pneumatic profile clamp. Automatic feed of the three-spindle drilling head. Manual milling according to the copy. Included: cutter 5x25x80/8 - 1 pc., drills p10-l12-p10 with chamfer - 1 set, blow gun.
Yilmaz FR 226 is a copy-milling machine for making all technological holes in a PVC profile: lock cylinder, hardware groove, holes for hardware handles, drainage holes, etc. Thanks to the low-speed drilling head of 900 rpm, it is possible to drill PVC simultaneously with reinforcement.
Automatic movement of the drilling head is provided by a hydropneumatic feed with the ability to adjust. Two horizontal pneumatic clamps are used to fix the profile. The machine can also be equipped with a profile centering system or a measuring roller table system.

YILMAZ ST 264 MACHINE FOR MILLING WATER SLOTS
THREE-SPINDLE AUTOMATIC MACHINE FOR MILLING DRAINAGE CHANNELS YILMAZ ST264 Designed for milling drainage channels of various heights in PVC profiles in two or three directions at various angles.
Contains 3 motors of 600 W each. The motor is selected using a switch. Automatic centering along the profile axis. Automatic processing cycle, one-button start. Included: 5x25x80/8 cutters - 2 pcs., 5x18x60/8 cutter - 1 pc., blow gun.

YILMAZ FR 221 S ALUMINUM. COPY MILLING MACHINE WITH COOLING
SINGLE SPINDLE COPY MILLING MACHINE YILMAZ FR221S Designed for milling holes for locks and handles in PVC and AL profiles. Makes holes in different directions. Pneumatic profile clamps. Included: cutters, blow gun, cooling system.
CHARACTERISTICS
Power 800 W (220 V) 1200 W (380 V)
Dimensions 80x64x149 cm
Weight 76 kg
Rotation speed 14000 rpm

YILMAZ CRM250S PNEUMATIC COPY MILLING MACHINE WITH COOLING
CRM 250 S - Manual copy milling machine for aluminum and PVC The machine with a pantograph is designed for fast and precise processing of 3 sides of an aluminum profile: making cavities on doors and sashes, holes for locks and handles, as well as bolts.
• The machine is equipped with a rotating tabletop for processing 3 profile surfaces at angles of -90°/0°/+90°
STANDARD COMPONENTS
• Ø8 x L: 120 mm cutter tooth
• Spray cooling system for the router kit
• Sprayer
• Right and left profile support
• Maintenance key (24 mm)
• Nippers
• Copy template
• LED lighting system
• 4x horizontal clamp

YILMAZ_DC421 PSD TWO-HEAD AUTOMATIC SAW
DC 421 PS / PSD is a fully automatic sawing machine that is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminium materials by means of double head sawing units equipped with Ø 420 mm of saw blades

YILMAZ_DC421 PBS TWO-HEAD AUTOMATIC SAW
DC 421PBS. Two-head saw with Windows, printer and data exchange interface. Frontal saw blade feed, with cooling.
DC 421 PBS is a fully automatic sawing machine that is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminium materials by means of double head sawing units equipped with Ø 420 mm of saw blades

YILMAZ KD 402 S TWO-HEAD SAW FOR CUTTING PVC AND ALUMINUM PROFILES
TWO-HEAD SEMI-AUTOMATIC PENDULUM SAW YILMAZ KD402PS
Designed for two- and one-sided cutting of PVC and AL profiles. Possible main cutting angles are 15°, 22.5°, 30°, 45°, 90° and intermediate. Maximum cross-section of the workpiece: at 90° - 205x125 mm; 175x138 mm or at 45° - 145x125 mm; 125x138 mm. Hydropneumatic disc feed. Clamps and pneumatic braking system. Adjustable cutting speed. The left head is fixed, the right one is manually moved. Included: 2x400 mm saw blades, blow gun.

YILMAZ NCR300 CNC COPY MILLING MACHINE WITH ROTARY TABLE, WITH COOLING
NCR300 - Powerful copy milling machine for aluminum and PVC with rotary table. The machine with pantograph is designed for fast and precise processing of 3 sides of aluminum profile: making cavities on doors and sashes, holes for locks and handles, as well as bolts.
• The machine is equipped with a rotating tabletop for processing 3 profile surfaces at angles of -90°/0°/+90°
• Tabletop brake mechanism, providing the ability to process at intermediate angles from -90° to 90° and fixing the tabletop
• High-performance 2.2 kW motor • Possibility of processing at 90°: (X) 585 mm, (Y) 200 mm, (Z) 200 mm
• Possibility of using a cutter with a diameter of 5 mm, 8 mm and 10 mm.
• Easily adjustable pneumatic 3-stage feelers Ø5, Ø8 and Ø10 mm.

NEW OZCELIK VEGA-IIA_AUTOMATIC SINGLE-HEAD PENDULUM SAW
Single-head aluminum saw Ozcelik Vega II A 400 with pendulum feed of the saw blade and coolant supply system, which is designed for cutting aluminum profiles and non-ferrous metals. Automatic feed of the saw blade. Cutting safety is ensured by a double spring system and a protective cover.
The cutting angle can be changed within the range from -45° to the right to +45° to the left. The main angles -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° have a clear fixation, other intermediate angles are set according to a graduated scale. The workpiece is fixed on the vega-2 thanks to two vertical and two horizontal pneumatic clamps.
THE PRICE OF THE MACHINE INCLUDES A 3.0 M MEASURING ROLLER UNIT.