YILMAZ MACHINE UPVC & ALUM

YILMAZ SK 500 AUTOMATIC SAW FOR SERIAL CUTTING OF PROFILES, DISC 500 MM
Yilmaz SK 500 is an automatic saw for serial cutting with a lower disc feed at an angle of 90°. The saw is designed for cutting aluminum embedded parts used to connect corners in AL window profiles by crimping on corner crimping machines. Standard components. Saw blade Ø500 mm = 1 pc. Spray saw cooling system. SK 500 roller table. Screw axial lubrication unit

YILMAZ RYK 420 CONSOLE SAW FOR CUTTING PROFILE, 420 MM DISC
YILMAZ RYK 420 is a circular saw blade cutting machine with radial movements, designed for straight and angled cutting of large aluminum and wood profiles. RYK 420 can perform straight and angled cutting with the help of a swivel and tilt head.

YILMAZ CK 412 GLAZING BEAD CUTTER WITHOUT CULS
AUTOMATIC CULSESS GLAZING BEAD CUTTER YILMAZ CK412 Designed for cutting glazing beads at an angle of 45 degrees. Automatic clamping and feed. Possibility to adjust the feed speed. After cutting, the saw blades automatically return to their original position. The glazing bead cutter is equipped with an eight-position turret stop to simulate pressing the glazing bead against the glass. Included: - 200 mm saw blades - 2 pcs., 110 mm scoring discs - 2 pcs., 2 m roller conveyor, 1.3 m T-square, blow gun. Measuring ruler included. Maximum workpiece cross-section: 90° - 130x75 mm or 45° - 100x75 mm.

YILMAZ SNM560SRV SERVO-CONTROLLED CUTTING SAW
SNM 560 SRV SERVO-CONTROLLED FACADE CUTTING SAW
The SNM 560SRV machine is designed for cutting and notching operations of blanks at the required angle and size in frames, sashes, mullions and lintels of PVC and aluminum profiles used in all types of facade cladding, in winter gardens, skylights and in special applications.
The blank is fixed on the machine's work table, and only the hydropneumatic saw unit with 2 saw blades automatically slides along the linear guides to perform notching and cutting operations.

YILMAZ SNM560M MANUALLY CONTROLLED CUTTING SAW
SNM 560M - MANUALLY CONTROLLED FACADE CUTTING SAW
The SNM 560M machine is designed for cutting and notching operations of blanks at the required angle and size in frames, sashes, mullions and lintels of PVC and aluminum profiles used in all types of facade cladding, in winter gardens, skylights and in special applications.
The blank is fixed on the machine's work table, and only the hydropneumatic saw unit with 2 saw blades automatically slides along the linear guides to perform the cut and notching.