YILMAZ MACHINE UPVC & ALUM

YILMAZ CA 601 CORNER CLEANING MACHINE (WITH QUICK-RELEASE SLEEVE FOR 1 CUTTER)
CLEANING MACHINE FOR 1 CUTTER WITH QUICK-RELEASE SHAFT, YILMAZ CA601. Designed for cleaning the welded corner of a PVC profile at an angle of 90°. Cleans the upper, lower surface of the corner and the outer corner. Adapted to various types of profile. There is a drive for centering the corner. 1 cutter (not included), quick-change system for cutters. Direction of rotation of the cutter - clockwise. Maximum cutter diameter - 230 mm. Shaft diameter - 32 mm, working height of the shaft - 100 mm. Profile height max - 100 mm. Blow gun included.

YILMAZ CA 603 CORNER CLEANING MACHINE (TWO SHAFTS, 4 CUTTERS)
YILMAZ CA603 CORNER CLEANING MACHINE WITH 4 CUTTERS Designed for cleaning the welded corner of a PVC profile at an angle of 90°. Cleans the upper, lower surface of the corner and the outer corner. Adapted to various types of profile. There is a drive for centering the corner. 4 cutters (not included), maximum cutter diameter - 230 mm. Direction of rotation of the cutter - clockwise. Maximum cutter diameter - 230 mm. Shaft diameter - 32 mm, working height of the shaft - 200 mm. Profile height max - 200 mm. Blow gun included.

YILMAZ FR 226S COPY MILLING MACHINE WITH 3-SPINDLE HEAD (HOLES FOR HANDLES AND LOCKS)
AUTOMATIC COPY MILLING MACHINE YILMAZ FR226S.
Designed for milling holes for locks and handles in PVC and AL profiles. Makes holes in different directions. Pneumatic profile clamp. Automatic feed of the three-spindle drilling head. Manual milling according to the copy. Included: cutter 5x25x80/8 - 1 pc., drills p10-l12-p10 with chamfer - 1 set, blow gun.
Yilmaz FR 226 is a copy-milling machine for making all technological holes in a PVC profile: lock cylinder, hardware groove, holes for hardware handles, drainage holes, etc. Thanks to the low-speed drilling head of 900 rpm, it is possible to drill PVC simultaneously with reinforcement.
Automatic movement of the drilling head is provided by a hydropneumatic feed with the ability to adjust. Two horizontal pneumatic clamps are used to fix the profile. The machine can also be equipped with a profile centering system or a measuring roller table system.

YILMAZ ST 264 MACHINE FOR MILLING WATER SLOTS
THREE-SPINDLE AUTOMATIC MACHINE FOR MILLING DRAINAGE CHANNELS YILMAZ ST264 Designed for milling drainage channels of various heights in PVC profiles in two or three directions at various angles.
Contains 3 motors of 600 W each. The motor is selected using a switch. Automatic centering along the profile axis. Automatic processing cycle, one-button start. Included: 5x25x80/8 cutters - 2 pcs., 5x18x60/8 cutter - 1 pc., blow gun.

YILMAZ FR 221 S ALUMINUM. COPY MILLING MACHINE WITH COOLING
SINGLE SPINDLE COPY MILLING MACHINE YILMAZ FR221S Designed for milling holes for locks and handles in PVC and AL profiles. Makes holes in different directions. Pneumatic profile clamps. Included: cutters, blow gun, cooling system.
CHARACTERISTICS
Power 800 W (220 V) 1200 W (380 V)
Dimensions 80x64x149 cm
Weight 76 kg
Rotation speed 14000 rpm

YILMAZ CRM250S PNEUMATIC COPY MILLING MACHINE WITH COOLING
CRM 250 S - Manual copy milling machine for aluminum and PVC The machine with a pantograph is designed for fast and precise processing of 3 sides of an aluminum profile: making cavities on doors and sashes, holes for locks and handles, as well as bolts.
• The machine is equipped with a rotating tabletop for processing 3 profile surfaces at angles of -90°/0°/+90°
STANDARD COMPONENTS
• Ø8 x L: 120 mm cutter tooth
• Spray cooling system for the router kit
• Sprayer
• Right and left profile support
• Maintenance key (24 mm)
• Nippers
• Copy template
• LED lighting system
• 4x horizontal clamp

CYILMAZ CNC 608 CNC CORNER CLEANING MACHINE, AUTOMATIC, TWO-AXIS
CNC608. Corner cleaning machine (90°).
Description:
•WINDOWS-based control system with touch screen.
•2 servo motors with a set of 11 tools.
•Possibility of profile type recognition.
•In case of matching profiles in the memory device, it is possible to view the list of matching profiles and select the correct program.
•Different types of knives for white and colored profiles
•Simultaneous stripping of the upper and lower surfaces of the profile using two independent stripping devices
•Automatic lubrication system
•The machine meets the requirements of the CE standard
Technical specifications:
CNC 608 3.7 kW, 400 V, 50 Hz d = 30/32 mm, D = 250 mm 30 < 130 mm, 30 < 130 mm h = 400 mm min, b = 400 mm min 6-8 bar, 103 l / min 1030 x 1980 x 1970 mm 1218 kg

YILMAZ NCR300 CNC COPY MILLING MACHINE WITH ROTARY TABLE, WITH COOLING
NCR300 - Powerful copy milling machine for aluminum and PVC with rotary table. The machine with pantograph is designed for fast and precise processing of 3 sides of aluminum profile: making cavities on doors and sashes, holes for locks and handles, as well as bolts.
• The machine is equipped with a rotating tabletop for processing 3 profile surfaces at angles of -90°/0°/+90°
• Tabletop brake mechanism, providing the ability to process at intermediate angles from -90° to 90° and fixing the tabletop
• High-performance 2.2 kW motor • Possibility of processing at 90°: (X) 585 mm, (Y) 200 mm, (Z) 200 mm
• Possibility of using a cutter with a diameter of 5 mm, 8 mm and 10 mm.
• Easily adjustable pneumatic 3-stage feelers Ø5, Ø8 and Ø10 mm.